Numerical Evaluation of the Direct Method for Cohesive Law Extraction in Shear by the End-Notched Flexure Test

With adhesive bonding, design can be oriented towards lighter structures, not only regarding the direct weight saving advantages of the joint over fastened or welded joints, but also because of flexibility to joint different materials. Cohesive Zone Models (CZM) are a powerful design tool, although the CZM laws of the adhesive bond in tension and shear are required as input in the models. This work evaluated the shear fracture toughness and CZM laws of bonded joints. The End-Notched Flexure (ENF) test geometry was used with this purpose. The experimental work consisted on the shear fracture characterization of the bond by conventional and the J-integral techniques. Additionally, by the J-integral technique, the precise shape of the cohesive law was defined. Numerical Finite Element (FE) simulations were carried out in Abaqus® to assess the accuracy of the obtained CZM laws in predicting the experimental behaviour of the ENF tests, with positive results. As output of this work, fracture data is provided in shear for the selected adhesive, allowing the subsequent strength prediction of bonded joints.info:eu-repo/semantics/publishedVersio

Controlled drug release from hydrogels for contact lenses: drug partitioning and diffusion

Optimization of drug delivery from drug loaded contact lenses assumes understanding the drug transport mechanisms through hydrogels which relies on the knowledge of drug partition and diffusion coefficients. We chose, as model systems, two materials used in contact lens, a poly-hydroxyethylmethacrylate (pHEMA) based hydrogel and a silicone based hydrogel, and three drugs with different sizes and charges: chlorhexidine, levofloxacin and diclofenac. Equilibrium partition coefficients were determined at different ionic strength and pH, using water (pH 5.6) and PBS (pH 7.4). The measured partition coefficients were related with the polymer volume fraction in the hydrogel, through the introduction of an enhancement factor following the approach developed by the group of C. J. Radke (Kotsmar et al., 2012; Liu et al., 2013). This factor may be decomposed in the product of three other factors EHS, Eel and Ead which account for, respectively, hard-sphere size exclusion, electrostatic interactions, and specific solute adsorption. While EHS and Eel are close to 1, Ead > > 1 in all cases suggesting strong specific interactions between the drugs and the hydrogels. Adsorption was maximal for chlorhexidine on the silicone based hydrogel, in water, due to strong hydrogen bonding. The effective diffusion coefficients, De, were determined from the drug release profiles. Estimations of diffusion coefficients of the non-adsorbed solutes D = De × Ead allowed comparison with theories for solute diffusion in the absence of specific interaction with the polymeric membrane.info:eu-repo/semantics/publishedVersio

Empirical evaluation of the potential of low-cost and open source “on-the-person” ECG for cardiopathy pre-screening

Electrocardiographic (ECG) data analysis can reveal crucial information about the cardiovascular physiologi- cal phenomenon, which is modulated by the Autonomic Nervous System. Hereupon, beyond cardiovascular diagnosis, ECG markers can also reflect workload levels, or even physical and mental performance, through Heart Rate Variability (HRV) analysis. Building upon previous work found within the state-of-the-art, this pilot research explores the potential of using a low-cost device for cardiopathy pre-screening, through ECG signal analysis. With the aim of performing the rhythmical analysis, we performed empirical tests from a population of 21 control subjects in a resting position, and an additional 2 subjects, one of them in dynamic condition, in the scope of an exploratory research, using ECG wave segments analysis and HRV features extraction for nu- merical analysis. Results have demonstrated that the signal quality allows reliable ECG acquisition for further rhythmical and HRV analysis, in stationary and dynamic monitoring, for the bipolar leads applied. There was also evidence to suggest a benefit from including ECG morphological analysis with this hardware and software setup for prevention and diagnosis of cardiovascular disorders, although requiring further investigation.info:eu-repo/semantics/publishedVersio

Study of the sensitisation process of a duplex stainless steel (UNS 1.4462) by means of confocal microscopy and localised electrochemical techniques

When duplex stainless steels are heated, they can become sensitised and intermetallic phases can appear. In this work, samples of duplex stainless steel, UNS 1.4462, have been heated (850 degrees C for 1 and 2 h) in a heating unit that can be accommodated to a confocal microscope in order to study the morphological changes in-situ. The electrochemical behaviour of the samples has been analysed by means of conventional and localised electrochemical techniques. According to the results, there is a general decrease in the steel resistance to localised corrosion; this decrease can be related to defects in the formed passive film.We wish to express our gratitude to MICINN (CTQ2009-07518), to Universitat Politecnica de Valencia (CEI-01-11), to the Generalitat Valenciana for its help in the CLSM acquisition (MY08/ISIRM/S/100), to Professor Alda Simoes and Andreia Marques for the help on LEIS measurements and to Dr. Asuncion Jaime for her translation assistance.Leiva García, R.; Fernandes, JS.; Muñoz-Portero, M.; Garcia-Anton, J. (2015). Study of the sensitisation process of a duplex stainless steel (UNS 1.4462) by means of confocal microscopy and localised electrochemical techniques. Corrosion Science. 94:327-341. https://doi.org/10.1016/j.corsci.2015.02.016S3273419