86 research outputs found

    ¿Pueden los factores clínicopatológicos mejorar la predicción de metástasis en ganglios linfáticos no centinelas en pacientes con cáncer de mama?

    Full text link
    Introduction: To determine whether clinicopathological characteristics can improve the prediction of metastasis to nonsentinel lymph nodes (NSLNs) over the use of only mRNA copy number in sentinel lymph node (SLN) biopsies. Methods: This was a retrospective, observational study that included a total of 824 patients with T1-3 breast cancer who had clinically negative, ultrasound-negative axilla without evidence of metastasis and who underwent one-step nucleic acid amplification in SLN biop-sies. Results: 118 required a complete axillary lymph node dissection (ALNhD). About 35.6% (42/118) had metastases to a NSLN, and 64.4% (76/118) had no metastasis to a NSLN. The ROC curve of the total tumor load (TTL) presented an area under the curve (AUC) of 0.651 (95%; CI: 0.552-0.751). The 7294 copies of CK19 mRNA were established as the optimal cutoff point, with sensitivity: 93%, specificity: 63%, positive predictive value: 44%, and negative predictive value: 91%. By as-sociating the clinicopathological parameters (multicentricity, pooled immunohistochemistry [IHC], and progesterone receptors), the AUC went up to 0.752 (95% CI: 0.663-0.841). Conclusions: Clinicopathological factors should be considered together with the total CK19 mRNA copy number (the TTL) of the SLNs to improve the predictive capacity of metastatic involvement of the NSLNs

    Height difference between the vestibular and palatal walls and palatal width: a cone beam computed tomography approach

    Get PDF
    Background: The objective of this study was to measure two parameters involved in tri-dimensional implant plan‑ ning: the position of the buccal and palatal bone wall and the palatal thickness. Methods: Cone beam computed tomography (CBCT) images (Planmeca ProMax 3D) of 403 teeth (208 upper teeth and 195 lower teeth) were obtained from 49 patients referred to the Dental School of Seville from January to Decem‑ ber 2014. The height diference between the palatal and buccal walls was measured on the most coronal point of both walls. The thickness of the palatal wall was measured 2 mm from the most coronal point of the palatal wall. Results: The mean values in the maxilla were 1.7±0.9 mm for central and lateral incisors, 2.2±1.7 mm for canines, 1.6±0.9 mm for premolars and 1.9±1.5 mm for molars. In the lower jaw, the mean values were 1.3±0.8 mm for inci‑ sors, 1.7±1.2 mm for canines, 2.3±1.3 mm for premolars, and 2.6±1.7 mm for molars. In the upper jaw, more than 55% of maxillary teeth (excluding second premolars and molars) presented mean height diferences greater than 1 mm. In the mandible, more than 60% of incisors showed a buccal bone thickness of 1 mm from the apical to lingual aspect. All teeth except the second premolar presented a buccal wall located more than 1 mm more apically than the lingual bone wall. Conclusions: The buccal bone wall is located more apically (greater than 1 mm) than the palatal or lingual table in most of the cases assessed. The thickness of the palatal or lingual table is also less than 2 mm in the maxilla and man‑ dible, except in the upper canines and premolars and the lower molars

    Reliability of the resonance frequency analysis values in new prototype transepithelial abutments: A prospective clinical study

    Get PDF
    Resonance frequency analysis (RFA) requires abutment disconnection to monitor implant stability. To overcome this limitation, an experimental transepithelial abutment was designed to allow a SmartPeg to be screwed onto it, in order to determine the prototype abutments repeatability and reproducibility using Osstell ISQ and to assess whether implant length and diameter have an influence on the reliability of these measurements. RFA was conducted with a SmartPeg screwed directly into the implant and onto experimental abutments of different heights of 2, 3.5 and 5 mm. A total of 32 patients (116 implants) were tested. RFA measurements were taken twice for each group from mesial, distal, buccal and palatal/lingual surfaces. Mean values and SD were calculated and Intraclass Correlation Coefficients (ICC) (p < 0.05, IC 95%). The implant stability quotient (ISQ) mean values were 72.581 measured directly to implant and 72.899 (2 mm), 72.391 (3.5 mm) and 71.458 (5 mm) measured from the prototypes. ICC between measurements made directly to implant and through 2-, 3.5-and 5-mm abutments were 0.908, 0.919 and 0.939, respectively. RFA values registered through the experimental transepithelial abutments achieved a high reliability. Neither the implant length nor the diameter had any influence on the measurements’ reliability

    Analysis of the drinks that contribute to the hydration of andalusian sportspeople

    Get PDF
    AbstractObjectivesTo estimate the water balance in a healthy population of sportspeople from Southern Spain and determine the sources of their fluid intake, evaluating the contribution of different types of drink and comparing the results by sex and province of residence.MethodsThree hundred eighty-six sportspeople (231 males, 152 females) were enrolled in the study. A questionnaire was administered to calculate nutrient intake through diet and physical activity, and anthropometric measures were taken according to ISAK standards. SPSS-15 was used for data analyses.ResultsFruit juice, tap water, bottled water, processed fruit juice, carbonated drinks, and isotonic drinks comprised 96% of the total water intake. Simple sugar consumption represented 4.44% of daily calorie intake. Significant differences were found between sexes and between professionals and amateurs. The amount of drinks consumed varied as a function of the quality of the drinking water, which significantly differed among the eight Andalusian provinces.ConclusionThis study population did not fully meet fluid intake recommendations, compliance with hydration recommendations varied as a function of the sex and the amateur or professional status of these sportspeople. The pattern of drinks consumption also differed according to their place of residence

    In vitro study of preload loss in different implant abutment connection designs

    Get PDF
    The stability and integrity of the abutment-implant connection, by means of a screw, is fallible from the moment the prosthetic elements are joined and is dependent on the applied preload, wear of the components and function. One of the main causes of screw loosening is the loss of preload. The loosening of the screw-abutment can cause complications such as screw fracture, marginal gap, peri-implantitis, bacterial microleakage, loosening of the crown and discomfort of the patient. It is also reported that loosening of the screw/abutment may lead to a failure of osseointegration. It is necessary to evaluate and quantify, with in vitro studies, the torque loss before and after loading in the different connections. Aim: evaluate the influence of implant- abutment connection design in torque maintenance after single tightening, multiple tightening and multiple tightening followed by mechanical cycling. Materials and Methods: 180 Klockner implants divided in 4 groups: 15 SK2 external connection, 25 Ncm tightening torque; 15 KL external connection, 30 Ncm tightening torque; 15 Vega internal connection, 25 Ncm tightening torque; 15 Essential internal connection, 30 Ncm tightening torque. In each group removal torque values (RTV) were evaluated with a digital torque meter, in 3 distinct phases: after one single tightening, 10 multiple tightenings and 10 multiple tightenings and cyclic loading (500 N × 1000 cycles). Results: After one single tightening, and for all connections, RTV were lower than those of insertion, but only for Essential and Vega internal connections this result was statistically significant. After multiple tightening, RTV were significantly lower in all connections. After repeated tightening followed by cyclic loading, mean RTV were significantly lower, when compared to insertion torque. The multiple tightening technique resulted in higher RTV than the single tightening technique, except for Vega implant. The multiple tightening followed by cyclic load, compared to the other phases, was the one that generated the lowest RTV, for all connections. Conclusions: The connection design, in our study, did not seem to influence the maintenance of preload. Loading influenced the loss of preload, in the sense that significantly decreased the removal torque values. The multiple re-tightening technique resulted in higher removal torque values than the single tightening technique. Clinically, our results recommend to retighten retaining screws, a few minutes after insertion

    Graph based study of allergen cross-reactivity of plant lipid transfer proteins (LTPs) using microarray in a multicenter study.

    Get PDF
    The study of cross-reactivity in allergy is key to both understanding. the allergic response of many patients and providing them with a rational treatment In the present study, protein microarrays and a co-sensitization graph approach were used in conjunction with an allergen microarray immunoassay. This enabled us to include a wide number of proteins and a large number of patients, and to study sensitization profiles among members of the LTP family. Fourteen LTPs from the most frequent plant food-induced allergies in the geographical area studied were printed into a microarray specifically designed for this research. 212 patients with fruit allergy and 117 food-tolerant pollen allergic subjects were recruited from seven regions of Spain with different pollen profiles, and their sera were tested with allergen microarray. This approach has proven itself to be a good tool to study cross-reactivity between members of LTP family, and could become a useful strategy to analyze other families of allergens

    Bevacizumab dose adjustment to improve clinical outcomes of glioblastoma.

    Get PDF
    Background Glioblastoma (GBM) is one of the most aggressive and vascularized brain tumors in adults, with a median survival of 20.9 months. In newly diagnosed and recurrent GBM, bevacizumab demonstrated an increase in progression-free survival, but not in overall survival. Methods We conducted an in silico analysis of VEGF expression, in a cohort of 1082 glioma patients. Then, to determine whether appropriate bevacizumab dose adjustment could increase the anti-angiogenic response, we used in vitro and in vivo GBM models. Additionally, we analyzed VEGFA expression in tissue, serum, and plasma in a cohort of GBM patients before and during bevacizumab treatment. Results We identified that 20% of primary GBM did not express VEGFA suggesting that these patients would probably not respond to bevacizumab therapy as we proved in vitro and in vivo. We found that a specific dose of bevacizumab calculated based on VEGFA expression levels increases the response to treatment in cell culture and serum samples from mice bearing GBM tumors. Additionally, in a cohort of GBM patients, we observed a correlation of VEGFA levels in serum, but not in plasma, with bevacizumab treatment performance. Conclusions Our data suggest that bevacizumab dose adjustment could improve clinical outcomes in Glioblastoma treatment.post-print1360 K

    Graph based study of allergen cross-reactivity of plant lipid transfer proteins (LTPs) using microarray in a multicenter study.

    Get PDF
    The study of cross-reactivity in allergy is key to both understanding. the allergic response of many patients and providing them with a rational treatment In the present study, protein microarrays and a co-sensitization graph approach were used in conjunction with an allergen microarray immunoassay. This enabled us to include a wide number of proteins and a large number of patients, and to study sensitization profiles among members of the LTP family. Fourteen LTPs from the most frequent plant food-induced allergies in the geographical area studied were printed into a microarray specifically designed for this research. 212 patients with fruit allergy and 117 food-tolerant pollen allergic subjects were recruited from seven regions of Spain with different pollen profiles, and their sera were tested with allergen microarray. This approach has proven itself to be a good tool to study cross-reactivity between members of LTP family, and could become a useful strategy to analyze other families of allergens

    The involvement of thaumatin-like proteins in plant food cross-reactivity: a multicenter study using a specific protein microarray.

    Get PDF
    Cross-reactivity of plant foods is an important phenomenon in allergy, with geographical variations with respect to the number and prevalence of the allergens involved in this process, whose complexity requires detailed studies. We have addressed the role of thaumatin-like proteins (TLPs) in cross-reactivity between fruit and pollen allergies. A representative panel of 16 purified TLPs was printed onto an allergen microarray. The proteins selected belonged to the sources most frequently associated with peach allergy in representative regions of Spain. Sera from two groups of well characterized patients, one with allergy to Rosaceae fruit (FAG) and another against pollens but tolerant to food-plant allergens (PAG), were obtained from seven geographical areas with different environmental pollen profiles. Cross-reactivity between members of this family was demonstrated by inhibition assays. Only 6 out of 16 purified TLPs showed noticeable allergenic activity in the studied populations. Pru p 2.0201, the peach TLP (41%), chestnut TLP (24%) and plane pollen TLP (22%) proved to be allergens of probable relevance to fruit allergy, being mainly associated with pollen sensitization, and strongly linked to specific geographical areas such as Barcelona, Bilbao, the Canary Islands and Madrid. The patients exhibited mayor que50% positive response to Pru p 2.0201 and to chestnut TLP in these specific areas. Therefore, their recognition patterns were associated with the geographical area, suggesting a role for pollen in the sensitization of these allergens. Finally, the co-sensitizations of patients considering pairs of TLP allergens were analyzed by using the co-sensitization graph associated with an allergen microarray immunoassay. Our data indicate that TLPs are significant allergens in plant food allergy and should be considered when diagnosing and treating pollen-food allergy
    corecore