Fabrication and characterization of PEEK/PEI multilayer composites

Polyetheretherketone (PEEK)/polyetherimide (PEI) blends (50/50, v/v) keeping the crystal phase of PEEK have been manufactured by alternate PEEK/PEI layer stacking. This strategy avoided the complete miscibility of both polymers, keeping layers of PEEK and PEI unmixed along the sample thickness, as well as promoting the formation of a smooth interfacial layer where PEEK and PEI were mixed. The properties of this interface after processing at molten state and different times was studied by DSC, DMA, and X-Ray synchrotron. These techniques allowed monitoring the evolution of glass transition, where isolated Tg’s for both pristine polymers were observed even after long processing time. PEEK crystallinity slightly decreased during manufacturing, whereas PEEK crystal parameters did not vary. These observations show that, although the interface—the zone where both polymers are mixed—grew, layers with pristine polymers remained even after prolonged processing time. The preservation of the PEEK crystallinity was also observed in the mechanical properties of the multilayer PEEK/PEI films, which were compared with pristine PEEK and PEI films. Multilayer samples processed for shorter times rendered higher young modulus, tensile strength, and strain at break.Ángel Alvaredo-Atienza gratefully acknowledges the Community of Madrid for financial support through the framework ‘Sistema Nacional de Garantía Juvenil’ fomented by the European Social Fund and the Youth Employment Initiative. SAXS/WAXS experiments were funded by the Diamond Light Source Synchrotron, (grant number SM20494). This work benefited from the use of the SasView application, originally developed under NSF award DMR-0520547. SasView contains code developed with funding from the European Union’s Horizon 2020 research and innovation programme under the SINE2020 project, grant agreement No 654000

A strategy to tailor the mechanical and degradation properties of PCL-PEG-PCL based copolymers for biomedical application

Biodegradable and biocompatible 3D printable biomaterials with tunable mechanical properties and degradation rate adapted to target tissues were urgently required to manufacture scaffolds for tissue regeneration. Herein, a strategy based on a series of copolymers are proposed where the mechanical and degradation properties can be optimized regarding the specific biological application. With this purpose, poly($\epsilon$-caprolactone)-poly(ethylene glycol)-poly($\epsilon$-caprolactone) (PCL-PEG-PCL, PCEC) triblock co-polymers with high molecular weight were synthesized by using PEG with a wide range of molecular weight (from 0.6 kg/mol to 35 kg/mol) as macroinitiators. PCEC copolymers exhibited tunable mechanical properties with an elastic modulus in the range 338-705 MPa and a degradation rate from 60% mass loss after 8 h to 70% mass loss after 23 days in accelerated tests, as well as excellent cytocompatibility and cell attachment after culture with mouse fibroblast L929 cells. The mechanisms responsible for these properties were ascertained by means of different techniques to ascertain the structure-property relationship in PCEC copolymers. Furthermore, it was shown that it is possible to manufacture PCEC scaffolds by 3D printing with excellent dimensional accuracy and controlled microporosity. This study provides a promising strategy to design, select, and fabricate copolymers with tunable mechanical properties and degradation rate for tissue engineering applications

Effect of the particle size and solids volume fraction on the thermal degradation behaviour of Invar 36 feedstocks

Degradation kinetics and the thermal stability of Invar 36 powder injection moulding feedstocks (PIM) based on cellulose acetate butyrate (CAB) and polyethylene glycol (PEG) binders were investigated using simultaneous thermogravimetric analysis (STA) and differential scanning calorimetry (DSC). The initial decomposition temperature (IDT) and the integral procedure decomposition temperature (IPDT) were used to analyse the thermal stability of the binder system as a function of the solid loading content and powder particle size. The degradation kinetics was studied, and the process apparent activation energies were assessed using isoconversional methods. All the methodologies revealed changes in the thermal degradation behaviours of the feedstocks for solid loadings that were previously determined to correspond to optimal solid loadings using other experimental procedures. The studies also contrast previous similar findings with a ceramic powder. Therefore these results strengthen the proposal of thermodynamic degradation studies of feedstocks as an alternative or complementary technique to determine optimal solid loading contents in metal injection moulding (MIM).The authors a wish to thank GUZMÁN GLOBAL S.L. and MIM TECH ALFA for their collaboration on the ECOPIM project (ref. IPT 2011 0931 20000) that was funded by the Spanish Ministry of the Economy and Competitiveness. Furthermore, the authors would like to acknowledge the strong support from the ESTRUMAT projects (ref. S2009/MAT 1585), which were funded by the CAM Consejería Educación Dir. Gral. Universidades e Investigación, and from the COMETAS project (ref. MAT2009/14448 C02 02), which was funded by the Spanish Ministry of the Economy and Compet itiveness. J.P.F. B. acknowledges support from “Marie Curie” Amarout Europe Program

Effect of nitrogen and oxygen doped carbon nanotubes on flammability of epoxy nanocomposites

To overcome the flammability of epoxy resins, novel nitrogen (CNₓ) and oxygen (COₓ) doped CNT were synthesized via CVD method and epoxy nanocomposites at 2 wt.%. constant loading were prepared by three roll milling and cured. The structures of the nanotubes were confirmed by XRD, XPS, SEM and Raman and it was found a very high aspect ratio especially for COₓ. Thermal degradation as well as glass transition temperatures and elastic moduli were measured by TGA, DSC and DMTA. The flammability of epoxy nanocomposites was studied by microscale combustion calorimetry (MCC) and limiting oxygen index (LOI) determination. Results showed that the fire retardant properties of nanocomposites improved significantly specially for COₓ, which presented a very high LOI (35%) and a homogeneous and uniform surface after burning. This effect was tentatively attributed to the very high aspect ratio of COₓ tubes.Authors wish to acknowledge financial support from Spanish Ministerio de Economía y Competitividad under grant MAT2014-57557-R. Authors also wish to thank Dr. Sofía M. Vega-Díaz for her invaluable help with XPS interpretatio

Digital Rock Physics in Cuttings Using High-Resolution Thin Section Scan Images

Digital rock physics (DRP) has undergone significant advancements in the use of various imaging techniques to acquire three-dimensional volumes and images of rock samples for the computation of petrophysical properties. This study focuses on developing a DRP workflow using high-resolution thin section scans for computing porosity and permeability in cuttings samples. The workflow was tested on quarry sandstone plug samples and artificially generated pseudo-cuttings before applying it to real cuttings from oil and gas wells. The results show that the porosity and permeability values obtained through the DRP workflow are statistically equivalent to those obtained through conventional routine core analysis (RCAL). The workflow was also able to handle the presence of various lithologies in real cuttings samples. The study demonstrates the feasibility of obtaining porosity and permeability values in cutting samples using the DRP approach, offering a fast and cost-effective methodology that provides additional data and allows linking petrophysical properties to image data from the cuttings

Analysis of four scales for global severity evaluation in Parkinson’s disease

Global evaluations of Parkinson?s disease (PD) severity are available, but their concordance and accuracy have not been previously tested. The present international, cross-sectional study was aimed at determining the agreement level among four global scales for PD (Hoehn and Yahr, HY; Clinical Global Impression of Severity, CGIS; Clinical Impression of Severity Index, CISI-PD; and Patient Global Impression of Severity, PGIS) and identifying which of them better correlates with itemized PD assessments. Assessments included additional scales for evaluation of the movement impairment, disability, affective disorders, and quality of life. Spearman correlation coefficients, weighted and generalized kappa, and Kendall?s concordance coefficient were used. Four hundred thirty three PD patients, 66% in HY stages 2 or 3, mean disease duration 8.8 years, were analyzed. Correlation between the global scales ranged from 0.60 (HY with PGIS) to 0.91 (CGIS with CISI-PD). Kendall?s coefficient of concordance resulted 0.76 (P<0.0001). HY and CISI-PD showed the highest association with age, disease duration, and levodopa-equivalent daily dose, and CISI-PD with measures of PD manifestations, disability, and quality of life. PGIS and CISI-PD correlated similarly with anxiety and depression scores. The lowest agreement in classifying patients as mild, moderate, or severe was observed between PGIS and HY or CISI-PD (58%) and the highest between CGIS and CISI-PD (84.3%). The four PD global severity scales agree moderately to strongly among them; clinician-based ratings estimate PD severity, as established by other measures, better than PGIS; and the CISI-PD showed the highest association with measures of impairment, disability, and quality of life.Fil: Martinez Martin, Pablo. Universidad Carlos III de Madrid. Instituto de Salud; EspañaFil: Rojo Abuin, José Manuel. Consejo Superior de Investigaciones Cientificas. Centro de Ciencias Humanas y Sociales. Instituto de Historia.; EspañaFil: Rodríguez Violante, Mayela. Instituto Nacional de Neurología y Neurocirugía; MéxicoFil: Serrano Dueñas, Marcos. Pontificia Universidad Católica del Ecuador; EcuadorFil: Garreto, Nélida Susana. Universidad de Buenos Aires. Facultad de Medicina. Centro Universitario de Neurologia "dr. Jose Maria Ramos Mejia".; ArgentinaFil: Martínez Castrillo, Juan Carlos. Instituto Ramón y Cajal de Investigación Sanitaria; EspañaFil: Campos Arillo, Víctor. Hospital Xanit International; EspañaFil: Fernández, William. Universidad Nacional de Colombia; ColombiaFil: Chaná Cuevas, Pedro. Universidad de Santiago de Chile. Facultad de Humanidades. Instituto de Ciencias Biomédicas.; ChileFil: Arakaki, Tomoko. Universidad de Buenos Aires. Facultad de Medicina. Centro Universitario de Neurologia "dr. Jose Maria Ramos Mejia".; Argentina. Fundación para la Lucha contra las Enfermedades Neurológicas de la Infancia; ArgentinaFil: Alvarez, Mario Gustavo. Centro Internacional de Restauración Neurológica ; CubaFil: Pedroso Ibañez, Ivonne. Centro Internacional de Restauración Neurológica ; CubaFil: Rodríguez Blázquez , Carmen. Universidad Carlos III de Madrid. Instituto de Salud; EspañaFil: Ray Chaudhuri , Kallol. National Parkinson Foundation International Centre of Excellence; Reino UnidoFil: Merello, Marcelo Jorge. Fundación para la Lucha contra las Enfermedades Neurológicas de la Infancia; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentin

The Vallecas Project: a cohort to identify early markers and mechanisms of Alzheimer's disease

Alzheimer’s disease (AD) is a major threat for the well-being of an increasingly aged world population. The physiopathological mechanisms of late-onset AD are multiple, possibly heterogeneous, and not well understood. Different combinations of variables from several domains (i.e., clinical, neuropsychological, structural, and biochemical markers) may predict dementia conversion, according to distinct physiopathological pathways, in different groups of subjects

Impact of operatoŕs experience on peri-procedural outcomes with Watchman FLX: Insights from the FLX-SPA registry

Background: The Watchman FLX is a device upgrade of the Watchman 2.5 that incorporates several design enhancements intended to simplify left atrial appendage occlusion (LAAO) and improve procedural outcomes. This study compares peri-procedural results of LAAO with Watchman FLX (Boston Scientific, Marlborough, Massachusetts) in centers with varying degrees of experience with the Watchman 2.5 and Watchman FLX. Methods: Prospective, multicenter, 'real-world' registry including consecutive patients undergoing LAAO with the Watchman FLX at 26 Spanish sites (FLX-SPA registry). Implanting centers were classified according to the center's prior experience with the Watchman 2.5. A further division of centers according to whether or not they had performed ≤ 10 or > 10Watchman FLX implants was prespecified at the beginning of the study. Procedural outcomes of institutions stratified according to their experience with the Watchman 2.5 and FLX devices were compared. Results: 359 patients [mean age 75.5 (SD8.1), CHA2DS2-VASc 4.4 (SD1.4), HAS-BLED 3.8(SD0.9)] were included. Global success rate was 98.6%, successful LAAO with the first selected device size was achieved in 95.5% patients and the device was implanted at first attempt in 78.6% cases. There were only 9(2.5%) major peri-procedural complications. No differences in efficacy or safety results according to the centeŕs previous experience with Watchman 2.5 and procedural volume with Watchman FLX existed. Conclusions: The Watchman FLX attains high procedural success rates with complete LAA sealing in unselected, real-world patients, along with a low incidence of peri-procedural complications, regardless of operatoŕs experience with its previous device iteration or the number of Watchman FLX devices implanted

Revista de Vertebrados de la Estación Biológica de Doñana

Página 298 con error de impresiónEstudio cariológico en dos especies de Serránidos del Mediterráneo (Peces: PerciformesRelaciones morfométricas de Atherina boyeri Risso (Pisces: Atherinidae) de la laguna de Zoñar (Córdoba, España)Contribución al conocimiento de la biometríay osteología de Barbus barbus bocagei, Steindachner, 1866 (Pisces: CyprinidaeLa actividad de la salamandra, Salamandra salamandra (L.), en Galicia.Estudios sobre el sapo corredor (Bufo calamita) en el Sur de España.1. BiometríaEstudios sobre el sapo corredor (Bufo calamita) en el Sur de España. II. AlimentaciónBiología de la reproducción de Rana iberica Boulenger 1879 en zonas simpátridas con Rana temporaria Linneo, 1758Nuevos datos sobre la distribución geográfica de Lacerta monticola cantabrica Mertens, 1929. (Sauria, lacertidae).Datos sobre Lacerta monticola Boulenger, 1905 (Saurio: lacertidae)en el oeste del Sistema Central.Nueva especie de Anolis (lacertilia, Iguanidae) para CubaEtograma cuantificado del cortejo en Falco naumannOntogénesis del comportamiento predador en Falco naumanniContaminación xenobiótica del Parque Nacional de Doñana. 1. Residuos de insecticidas organoclorados, bifenilos policlorados y mercurio en anseriformes y gruiformesReproducción del críalo (Clamator glandarius) en Sierra Morena CentraNidificación de Picus viridis en taludes de arcilla en Ramblas de Guadix (Granada)Comportamiento del calamón Porphyrio porphyrio (Linnaeus, 1758) en Doñana, Marismas del GuadalquiviBiología y ecología de la malvasía (Oxyura leucocephala) en Andalucía.On the differential diet of Carnivora in islands:a method for analysing it and a particular case.Notas sobre la distribución pasada y actual del meloncillo Herpestes ichneumon (L.) en la Península IbéricaEstructuración de las interacciones en una camada de lobos (Canís lupus)Nuevos datos sobre la distribución del Cottus gobio L. (pisces, cottidae) en EspañaSobre la alimentación de Callopistes maculatus (Reptilia,teiidaeObservación de Lacerta lepida depredando un nido de Alectoris rufaNueva cita del galápago leproso Mauremys leprosa (Scheigger, 1812) en los pirineosPrimera cita de Psammodromus hispanicus (Fitzinger) para GaliciaSobre la presencia de Gallotia (=Lacerta) atlantica (Peters y Doria, 1882) en Gran CanariaNota sobre las Lacerta monticola Boulenger, 1905 de las zonas del norte de GaliciaPrimeras notas herpetológicas de la provincia de Soria.Datos sobre selección de hábitat y ecología alimenticia del porrón pardo (Aythya nyroca)Probable nueva área de cría del pechiazul (Luscinia svecica cyanecula) en el sistema central. PerisPredación de Falco peregrinus y Falco subbuteo sobre quirópterosResultados de la producción de Oxyura leucocephala en el año 1981 en las lagunas de Zóñar y el rincónAnálisis de la dieta de Tyto alba en un medio árido antropógeno de los alrededores de Almería¿Son Eudocimus ruber y E. albus distintas especies?EL Estornino pinto (Sturnus vulgaris) en Canarias: nueva especie nidifiante en el archipiélagoDatos sobre la alimentación otoñal del cárabo (Strix aluco) en la sierra de CádizObservación primaveral de rapaces y otras aves en el páramo del estado de Mérida (Venezuela).Murciélago hematófago (Desmodus rotundus) parasitando a un chigüire (Hidrochoerus hydrochaeris)Observaciones sobre la reproducción del zacatuche o teporinho Romerolagus diazi (Mammalia: lagomorpha)Estudio electroforético de hemoglobinas y esterasas sanguíneas en Rhinolophus ferrumequinum (Chiroptera: rhinolophidae) y de hemoglobinas en Tadaria taeniotis (chiroptera: molossidae)Peer reviewe