A study of frequency band structure in two-dimensional homogeneous anisotropic phononic K 3 -metamaterials

British council - Kiev under the Academic Partnership/Mobility Grant scheme grant No. UKR16EG/3/19.01.16

Dynamics of transversally vibrating non-prismatic Timoshenko cantilever beams

TurkAz Enerji Lt

Structural mechanics of negative stiffness honeycomb metamaterials

The development of multi-stable structural forms has attracted considerable attention in the design of architected multi-materials, metamaterials, and morphing structures, as a result of some unusual properties such as negative stiffness and, possibly, negative Poisson's ratio. Multi-stability is achieved through a morphological change of shape upon loading, and in doing so multi-stable structures undergo transitions from one equilibrium state to another. This paper investigates the structural performance of the negative stiffness honeycomb (NSH) metamaterials made of double curved beams which are emerging in various applications such as sensors, actuators, and lightweight impact protective structures with structural tunability and recoverability. An analytical treatment is pursued using the Euler–Lagrange theorem and the stability of the honeycomb has been studied. Based on a static analysis of the nonlinear elastic system, the developed tangent stiffness matrix and ensuing deformation curve were assessed through multiple phases of deformation. The closed-form solution was in good agreement with the numerical finite element (FE) model at different bistability ratios. It was shown that the bistability ratio had a pronounced effect on the overall response of the honeycomb and the desired negativity in the stiffness matrix could be achieved with high bistability ratios

Coupling XFEM and peridynamics for brittle fracture simulation—part I: feasibility and effectiveness

A peridynamics (PD)–extended finite element method (XFEM) coupling strategy for brittle fracture simulation is presented. The proposed methodology combines a small PD patch, restricted near the crack tip area, with the XFEM that captures the crack body geometry outside the domain of the localised PD grid. The feasibility and effectiveness of the proposed method on a Mode I crack opening problem is examined. The study focuses on comparisons of the J integral values between the new coupling strategy, full PD grids and the commercial software Abaqus. It is demonstrated that the proposed approach outperforms full PD grids in terms of computational resources required to obtain a certain degree of accuracy. This finding promises significant computational savings when crack propagation problems are considered, as the efficiency of FEM and XFEM is combined with the inherent ability of PD to simulate fracture

Multiphysics Modelling of Powder Coating of U-Profiles: Towards Simulation-based Optimization of Key-Performance Attributes by Variation of Powder-Parameters

Multiphysics simulation software has been developed to predict the key performance attributes of industrial powder coating applications based on applied process-parameter settings. The software is a Eulerian-Lagrangian finite-volume Multiphysics solver based on OpenFOAM, capable of modelling mass transfer effects between powder-coating pistols and electrically grounded metallic substrates. It considers various factors such as fluid dynamics of process airflow, coating-particle dynamics, particle-substrate interactions, and particle charging mechanisms within the corona. The software is fully compatible with Massive Simultaneous Cloud Computing technology, allowing hundreds of simulated coating scenarios to be computed simultaneously. Experimental validation efforts have been conducted, indicating a high degree of practical relevance of the technology. The current simulation study aims to demonstrate the potential of the simulation software for adjusting coating lines and optimizing powder coating of U-profiles. Specifically, the study focuses on optimizing the key-performance-attributes of the powder coating application with respect to varying material parameters of the applied powder, namely mean particle diameter, standard deviation of Gaussian particle size distribution, and powder particle density. The software predicts and visualizes coating patterns, coating efficiencies, and the batch-based standard deviation of coating thickness on a U-shaped metallic substrate, resulting in concrete and optimized powder settings. The presented results and the applied software are highly relevant for powder material suppliers

Dynamic response of blast loaded Hollow Cylindrical and Truncated Conical shells

Hollow cylindrical and truncated conical shells depict enhanced torsional and shear resistance compared to beams and plates and are ubiquitously used in structures in aeronautics, submarines, wind turbines, pressure vessels, and transmission pylons. Upon extensive localised blast, these elements undergo local and global deformation and failure. The detrimental damage to the shell depends on the stand-off and charge mass and is proportional to the emerged local dynamic stresses and inelastic deformations. Large localised translations relocate the structure’s original pivot point and induce global rotations about the new one which raises the probability of structural collapse. In this work, we examine large plastic deformations of hollow cylindrical and truncated conical shells subject to a range of pulse pressures emanated from high explosives. Fluid-Structure Interaction (FSI)-based Finite Element (FE) models were developed to discern the characteristics of blasts at various stand-offs and functions were proposed to link load parameters to structural, material, and geometric properties

Dry and Humid Periods Reconstructed from Tree Rings in the Former Territory of Sogdiana (Central Asia) and Their Socio-economic Consequences over the Last Millennium

One of the richest societies along the Silk Road developed in Sogdiana, located in present-day Tajikistan, Uzbekistan, and Kyrgyzstan. This urban civilisation reached its greatest prosperity during the golden age of the Silk Road (sixth to ninth century ce). Rapid political and economic changes, accelerated by climatic variations, were observed during last millennium in this region. The newly developed tree-ring-based reconstruction of precipitation for the pastmillennium revealed a series of dry and wet stages. During the Medieval Climate Anomaly (MCA), two dry periods occurred (900–1000 and 1200–1250), interrupted by a phase of wetter conditions. Distinct dry periods occurred around 1510–1650, 1750–1850, and 1920–1970, respectively. The juniper tree-ring record of moisture changes revealed that major dry and pluvial episodes were consistent with those indicated by hydroclimatic proxy data from adjacent areas. These climate fluctuations have had longand short term consequences for human history in the territory of former Sogdiana