880 research outputs found
Imprints of a heliospheric bowshock on interstellar oxygen populations
International audienceIt is well known that the nearby interstellar medium represents a partially ionized gas composed by different chemical species, amongst them hydrogen, helium and oxygen as the most abundant elements. While the passage of the interstellar protons and H-atoms over the solar system has been satisfactorily well modelled meanwhile, the entrance into the heliosphere of the other interstellar chemical species needs some additional care. Here we especially follow with Boltzmann-kinetic treatments the phase-space history of interstellar oxygen ions and atoms at their passage over the outer heliospheric bowshock and at their further approach towards the inner heliosphere. We describe the nose region of the bowshock as a mild MHD shock of a nearly perpendicular type. While the O-atoms pass over this shock with no velocity-space imprints, by contrast the O+-ions run over the shock structure with a typical overshoot velocity and on the downstream region are then picked up by the frozen-in magnetic fields that comove with the plasma bulk flow, i.e. the proton bulk flow. This leads to a strongly non-relaxated O-ion velocity distribution which substantially differs both from the local O-atom and proton distribution functions. Due to a strong charge exchange coupling between O-ions/atoms and H-atoms/ions the distributions downstream from the bowshock undergo permanent changes which we estimate in this study here. Even though relaxation processes operate by Coulomb collisions, wave-particle interactions and elastic atom-atom collisions, the bowshock imprints on the O- ion and atoms distribution functions may be conserved throughout the whole heliospheric interface, and, as we are going to suggest in this paper, in fact as such may be used as tracers to the physics and the nature of the bowshock. One of the main conclusions is that the population of O-atoms created in the vicinity of the bow-shock should carry a signature of the effective shock strength that could be detectable if the LIC magnetic field is about 2 microgauss or stronger
Neutral interstellar hydrogen in the inner heliosphere under the influence of wavelength-dependent solar radiation pressure
With the plethora of detailed results from heliospheric missions and at the
advent of the first mission dedicated IBEX, we have entered the era of
precision heliospheric studies. Interpretation of these data require precision
modeling, with second-order effects quantitatively taken into account. We study
the influence of the non-flat shape of the solar Ly-alpha line on the
distribution of neutral interstellar H in the inner heliosphere. Based on
available data, we (i) construct a model of evolution for the solar Ly-alpha
line profile with solar activity, (ii) modify an existing test-particle code
used to calculate the distribution of neutral interstellar H in the inner
heliosphere so that it takes the dependence of radiation pressure on radial
velocity into account, and (iii) compare the results of the old and new
version. Discrepancies between the classical and Doppler models appear between
~5 and ~3 AU and increase towards the Sun from a few percent to a factor of 1.5
at 1 AU. The classical model overestimates the density everywhere except for a
~60-degr cone around the downwind direction, where a density deficit appears.
The magnitude of the discrepancies appreciably depends on the phase of the
solar cycle, but only weakly on the parameters of the gas at the termination
shock. For in situ measurements of neutral atoms performed at ~1 AU, the
Doppler correction will need to be taken into account, because the
modifications include both the magnitude and direction of the local flux by a
few km/s and degrees, respectively, which, when unaccounted for, would
introduce an error of a few km/s and degrees in determination of the magnitude
and direction of the bulk velocity vector at the termination shock.Comment: 10 pages, 13 figures, accepted by A&
Linear combination methods for prediction of drug skin permeation
YesMany in-vitro methods for prediction of skin permeability have been reported in literature. Cerasome electrokinetic chromatography is one of the most sophisticated approaches representing a maximum level of similarity to the lipid phase of the stratum corneum. One goal of this study was to investigate the affinity pattern of Cerasome and to compare it with the permeability profile of human skin. Another purpose was to study the applicability of Hansen solubility parameters for modelling skin permeation and to investigate the predictive and explanatory potential of this method. Visualisation in Hansen diagrams revealed very similar profiles of Cerasome electrokinetic chromatography retention factors and skin permeability coefficients. In both cases, the characteristic pattern with two clusters of highly retained or highly permeable substances could be shown to be mainly caused by two groups of compounds, one of them with high affinity to ceramides, fatty acids and lecithin and the other being more affine to cholesterol. If based on a sufficiently comprehensive experimental dataset, model-independent predictions of skin permeability data using three-component Hansen solubility parameters are able to achieve similar accuracy as calculations made with an Abraham linear free energy relationship model in which the compounds are characterized by seven physicochemical descriptors
Approaching the Lambertian limit in randomly textured thin-film solar cells
The Lambertian limit for solar cells is a benchmark for evaluating their efficiency. It has been shown that the performance of either extremely thick or extremely thin solar cells can be driven close to this limit by using an appropriate photon management. Here we show that this is likewise possible for realistic, practically relevant thin-film solar cells based on amorphous silicon. Most importantly, we achieve this goal by relying on random textures already incorporated into state-of-the-art superstrates; with the only subtlety that their topology has to be downscaled to typical feature sizes of about 100 nm
Stability of an MHD shear flow with a piecewise linear velocity profile
In this paper we present the results of the stability analysis of a simple shear flow of an incompressible fluid with a piecewise linear velocity profile in the presence of a magnetic field. In the flow, a finite transitional magnetic-free layer with a linear velocity profile is sandwiched by two semi-infinite regions. One of these regions is magnetic-free and the flow velocity in the region is constant. The other region is magnetic and the fluid in it is quiescent. The magnetic field is constant and parallel to the flow in the transitional layer. The fluid density is constant both in the magnetic as well as the magnetic-free regions, while it has a jump-type discontinuity at the boundary between the transitional layer and the magnetic region. The effect of gravity is included in the model, and it is assumed that the lighter fluid is overlaying the heavier one, thus no Rayleigh-Taylor instability is present. The dispersion equation governing the normal-mode stability of the flow is derived and its properties are analysed. We study stability of two cases: (i) magnetic-free flow in the presence of gravity, and (ii) magnetic flow without gravity. In the first case, the flow stability is controlled by the Rayleigh number, R. In the second case, the control parameter is the inverse squared Alfvénic Mach number, H . Stability of a particular monochromatic perturbation also depends on its dimensionless wavenumber α. We combine the analytical and numerical approaches to obtain the neutral stability curves in the (α,R)-plane in the case of the magnetic-free flow, and in the (α,H)-plane in the case of the magnetic flow. The dependence of the instability increment on R in the first case, and on H in the second case is treated. We apply the results of the analysis to the stability of a strongly subsonic portion of the heliopause. Our main conclusion is as follows: The inclusion of a transitional layer near the heliopause into the model increases by an order of magnitude the strength of the interstellar magnetic field required to stabilize this portion of the heliopause in comparison with the corresponding stabilizing strength of the magnetic field required when modelling the heliopause as a tangential discontinuity
Heating of the solar wind in the outer heliosphere
International audienceSmall-scale Alfvènic turbulence in the outer heliosphere is mainly determined by a source which is connected with the instability of the initially highly anisotropic velocity distribution of interstellar pick-up protons. The main portion of the generated turbulent energy is subsequently absorbed by the pick-up protons themselves due to the cyclotron-resonant interaction between waves and particles. A small fraction of this energy can be transferred to solar wind protons resulting in their heating. The heating is more efficient in the high-speed solar wind
A Cascade Neural Network Architecture investigating Surface Plasmon Polaritons propagation for thin metals in OpenMP
Surface plasmon polaritons (SPPs) confined along metal-dielectric interface
have attracted a relevant interest in the area of ultracompact photonic
circuits, photovoltaic devices and other applications due to their strong field
confinement and enhancement. This paper investigates a novel cascade neural
network (NN) architecture to find the dependance of metal thickness on the SPP
propagation. Additionally, a novel training procedure for the proposed cascade
NN has been developed using an OpenMP-based framework, thus greatly reducing
training time. The performed experiments confirm the effectiveness of the
proposed NN architecture for the problem at hand
Game-based training of selective voluntary motor control in children and youth with upper motor neuron lesions: protocol for a multiple baseline design study
Background
Impairments of selective control of joint movements can have consequences for many activities of daily life, but there are only a few interventions to improve selective voluntary motor control (SVMC). We have developed a treatment option to specifically enhance SVMC exploiting the advantages of interactive computer play technology. It targets SVMC by training selective activation of a muscle or a selective joint movement while it provides immediate feedback about involuntary muscle activations/movements at an (unwanted) joint. This study aims to investigate the effectiveness of this game-based intervention to enhance SVMC in children and youth with upper motor neuron lesions.
Methods
We will conduct a randomized, non-concurrent, multiple baseline design study. Patients aged between 6 and 20 years with reduced SVMC due to an upper motor neuron lesion will be included. During the baseline phase of random length, participants will attend their regular intensive rehabilitation program, and in the intervention phase, they will additionally complete 10 therapy sessions (à 40 min) of the game-based SVMC training. The primary outcome will be a short SVMC assessment conducted repeatedly throughout both phases, which quantifies movement accuracy and involuntary movements. Changes in clinical SVMC measures, muscle strength, cortical excitability, motor control of the inhibited/unwanted movement, and functional independence will be assessed as secondary outcomes. We will use a mixed-effect model to determine the change in the course of the primary outcome when the intervention is introduced, and we will compare changes between phases for secondary outcomes with paired tests.
Discussion
This study will provide first evidence whether SVMC can be improved with our game-based training. The single-case design takes into account the individualization required for this intervention, and it can help to address the challenges of intervention trials in our setting.
Trial registration
German Clinical Trials Register: DRKS00025184, registered on 28.04.2021
Rugate filter for light-trapping in solar cells
We suggest a design for a coating that could be applied on top of any solar cell having at least one diffusing surface. This coating acts as an angle and wavelength selective filter, which increases the average path length and absorptance at long wavelengths without altering the solar cell performance at short wavelengths. The filter design is based on a continuous variation of the refractive index in order to minimize undesired reflection losses. Numerical procedures are used to optimize the filter for a 10 ÎĽm thick monocrystalline silicon solar cell, which lifts the efficiency above the Auger limit for unconcentrated illumination. The feasibility to fabricate such filters is also discussed, considering a finite available refractive index range
Neutral H density at the termination shock: a consolidation of recent results
We discuss a consolidation of determinations of the density of neutral
interstellar H at the nose of the termination shock carried out with the use of
various data sets, techniques, and modeling approaches. In particular, we focus
on the determination of this density based on observations of H pickup ions on
Ulysses during its aphelion passage through the ecliptic plane. We discuss in
greater detail a novel method of determination of the density from these
measurements and review the results from its application to actual data. The H
density at TS derived from this analysis is equal to 0.087 \pm 0.022 cm-3, and
when all relevant determinations are taken into account, the consolidated
density is obtained at 0.09 \pm 0.022 cm-3. The density of H in CHISM based on
literature values of filtration factor is then calculated at 0.16 \pm 0.04
cm-3.Comment: Submitted to Space Science Review
- …