8 research outputs found
Modelling and control for the oscillating water column
xxii, 219 p.Renewable energies are definitely part of the equation to limit our dependence to fossil fuels. Within this sector, ocean energies, and especially wave energy, represent a huge potential but is still a growing area. And like any new field, it is synonym to a high cost of energy production. Increasing the energy production, while keeping the costs controlled, has the leverage to drop down the cost of energy produced by wave energy converters (WECs). The main objective of this thesis is to make progress on the understanding of the effect of advanced control algorithms in the improvement of the power produced by wave energy devices. For that purpose, several control strategies are designed, compared, and assessed. To support this analysis, numerical models representing the overall energy conversion chain of WECs are developed. The Basque Country in Spain is fortunate enough to host the development and operation of two devices based on the Oscillating Water Column (OWC) principle. One is the Mutriku OWC plant, and the second is the floating buoy Marmok-A from Oceantec/IDOM, both devices were made available for sea trials. Several control algorithms were then implemented to be tested in real environments. Among them was a non-linear predictive control algorithm. Its test in real conditions represent a world first in the area of control for OWC systems, and maybe for the whole WEC sector if comparing with publicly available information. An outstanding results of the thesis is undoubtedly to move forward the predictive control algorithm from TRL3 to TRL6 after successful implementation and operation in both devices under real environmental conditions
Modelling and control for the oscillating water column
xxii, 219 p.Renewable energies are definitely part of the equation to limit our dependence to fossil fuels. Within this sector, ocean energies, and especially wave energy, represent a huge potential but is still a growing area. And like any new field, it is synonym to a high cost of energy production. Increasing the energy production, while keeping the costs controlled, has the leverage to drop down the cost of energy produced by wave energy converters (WECs). The main objective of this thesis is to make progress on the understanding of the effect of advanced control algorithms in the improvement of the power produced by wave energy devices. For that purpose, several control strategies are designed, compared, and assessed. To support this analysis, numerical models representing the overall energy conversion chain of WECs are developed. The Basque Country in Spain is fortunate enough to host the development and operation of two devices based on the Oscillating Water Column (OWC) principle. One is the Mutriku OWC plant, and the second is the floating buoy Marmok-A from Oceantec/IDOM, both devices were made available for sea trials. Several control algorithms were then implemented to be tested in real environments. Among them was a non-linear predictive control algorithm. Its test in real conditions represent a world first in the area of control for OWC systems, and maybe for the whole WEC sector if comparing with publicly available information. An outstanding results of the thesis is undoubtedly to move forward the predictive control algorithm from TRL3 to TRL6 after successful implementation and operation in both devices under real environmental conditions
Comparative assessment of control strategies for the biradial turbine in the Mutriku OWC plant
To be competitive against other renewable energy sources, energy converted from the ocean waves needs to reduce its associated levelised cost of energy. It has been proven that advanced control algorithms can increase power production and device reliability. They act throughout the power conversion chain, from the hydrodynamics of wave absorption to the power take-off to improve the energy yield. The present work highlights the development and test of several algorithms to control the biradial turbine which is to be installed in the Mutriku oscillating water column plant. A collection of adaptive and predictive controllers is explored and both turbine speed controllers and latching strategies are examined. A Wave-to-Wire model of one chamber of the plant is detailed and simulation results of six control laws are obtained. The controllers are then validated using an electrical test infrastructure to prepare the future deployment in the plant. Finally, the control strategies are assessed against criteria like energy production, power quality or reliability.This work has received funding from the European Union'sHorizon 2020 research and innovation programme under grantagreement No 654444 (OPERA Project). This work was financed by GV/EJ (Basque Country Government) under grants IT1324-19. The second author was partially funded by the Portuguese Foundationfor Science and Technology (FCT) through IDMEC, under LAETAPEst-OE/EME/LA0022 by FCT researcher grant No. IF/01457/2014.The authors acknowledge AZTI Tecnalia for wave resource data measured at the plant
Sea trial results of a predictive algorithm at the Mutriku Wave power plant and controllers assessment based on a detailed plant model
Improving the power production in wave energy plants is essential to lower the cost of energy production from this type of installations. Oscillating Water Column is among the most studied technologies to convert the wave energy into a useful electrical one. In this paper, three control algorithms are developed to control the biradial turbine installed in the Mutriku Wave Power Plant. The work presents a comparison of their main advantages and drawbacks first from numerical simulation results and then with practical implementation in the real plant, analysing both performance and power integration into the grid. The wave-to-wire model used to develop and assess the controllers is based on linear wave theory and adjusted with operational data measured at the plant. Three different controllers which use the generator torque as manipulated variable are considered. Two of them are adaptive controllers and the other one is a nonlinear Model Predictive Control (MPC) algorithm which uses information about the future waves to compute the control actions. The best adaptive controller and the predictive one are then tested experimentally in the real power plant of Mutriku, and the performance analysis is completed with operational results. A real time sensor installed in front of the plant gives information on the incoming waves used by the predictive algorithm. Operational data are collected during a two-week testing period, enabling a thorough comparison. An overall increase over 30% in the electrical power production is obtained with the predictive control law in comparison with the reference adaptive controller.The work was funded by European Union's Horizon 2020 research and innovation program, OPERA Project under grantagreement No 654444, and the Basque Government under project IT1324-19. We acknowledge Ente Vasco de la Energía (EVE) for theaccess of the Mutriku plant and Oceantec in their support during the sea trials. The authors thank Joannes Berques (Tecnalia) for hiscontribution on the wave climate analysis at Mutriku and Borja de Miguel (IDOM) for his insights on the hydrodynamics modelling. Special thanks go to Temoana Menard in the study of the polytropic air model during its internship at Tecnalia
An Iterative Refining Approach to Design the Control of Wave Energy Converters with Numerical Modeling and Scaled HIL Testing
The aim of this work is to show that a significant increase of the e_ciency of aWave Energy Converter (WEC) can be achieved already at an early design stage, through the choice of a turbine and control regulation, by means of an accurate Wave-to-Wire (W2W) modeling that couples the hydrodynamic response calibrated in a wave flume to a Hardware-In-the-Loop (HIL) test bench with sizes and rates not matching those of the system under development. Information on this procedure is relevant to save time, because the acquisition, the installation, and the setup of a test rig are not quick and easy. Moreover, power electronics and electric machines to emulate turbines and electric generators matching the real systems are not low-cost equipment. The use of HIL is important in the development of WECs also because it allows the carrying out of tests in a controlled environment, and this is again time- and money-saving if compared to tests done on a real system installed at the sea. Furthermore, W2W modeling can be applied to several Power Take-O_ (PTO) configurations to experiment di_erent control strategies. The method here proposed, concerning a specific HIL for testing power electronics and control laws for a specific WECs, may have a more general validity.This work was supported by MARINET, a European Community—Research Infrastructure Action
under the FP7 “Capacities” Specific Programme, grant agreement n. 262552
Analysis of electrical drive speed control limitations of a power take-off system for wave energy converters
The active control of wave energy converters with oil-hydraulic power take-off systems presents important demands on the electrical drives attached to their pumps, in particular on the required drive accelerations and rotational speeds. This work analyzes these demands on the drives and designs reliable control approaches for such drives by simulating a wave-to-wire model in a hardware in-the-loop simulation test rig. The model is based on a point absorber wave energy converter, being the wave, hydrodynamic and oil-hydraulic part simulated in a computer that sends and receives signals from the real embedded components, such as the drive generator, controller and back-to-back converter. Three different control strategies are developed and tested in this test rig and the results revealed that despite the drive limitations to acceleration levels, well above 1 × 104 rpm/s, these do not significantly affect the power take-off efficiency, because the required acceleration peaks rarely achieve these values. Moreover this drive is much more economical than an oil-hydraulic and equivalent one that is able to operate at those peaks of acceleration.This work was performed within the Strategic Research Plan of the Center for Marine Technology and Ocean Engineering, which is financed by Portuguese Foundation for Science and Technology (Fundacao para a Ciencia e Tecnologia-FCT) and the project "Generic hydraulic power take-off system for wave energy converters" funded by the Portuguese Foundation for Science and Technology (FCT) under contract PTDC/EMS-SIS-1145/2014. The testing has received support from MARINET, a European Community - Research Infrastructure Action under the FP7 "Capacities" Specific Programme, grant agreement nr. 262552. The research leading to these results is also part of the OceaNET project, which has received funding from the European Union's Seventh Framework Programme for research, technological development and demonstration under grant agreement nr. 607656