Sarcoidosis with heart involvement: a rare association of terrible prognosis, a report of two cases

Sarcoidosis is a multisystemic disorder of unknown etiology which is characterized by the formation of non-caseating granulomas in involved tissues. Cardiac involvement is one of the least common manifestations and it can occur at any point of time during the course of sarcoidosis. Here we present the case of 2 patients with known sarcoidosis who develop cardiac abnormalities in the absence of known primary cardiac cause. In our report, we would like to draw attention to the importance of considering heart involvement in any case with systemic sarcoidosis especially in young age

Affine convex body semigroups

In this paper we present a new kind of semigroups called convex body semigroups which are generated by convex bodies of R^k. They generalize to arbitrary dimension the concept of proportionally modular numerical semigroup of [7]. Several properties of these semigroups are proven. Affine convex body semigroups obtained from circles and polygons of R^2 are characterized. The algorithms for computing minimal system of generators of these semigroups are given. We provide the implementation of some of them

Coexistence of pyoderma gangrenosum and sweet’s syndrome in a patient with ulcerative colitis

Pyoderma gangrenosum (PG) and Sweet's Syndrome (SS) are inflammatory skin diseases caused by the accumulation of neutrophils in the skin and, rarely, in internal organs. These neutrophilic dermatosis (NDs) are distinguished by the existence of forms of transition or overlap. They are frequently associated to systemic diseases especially hematologic and gastrointestinal ones. We report a case of a patient with ulcerative colitis (UC) who successively developed two types of NDs: PG then SS. A 66 years old patient with a history of UC consulted in July 2012 for an erythematous swelling of the back of the right hand treated with antibiotics without improvement. At that time, bacteriological samples were negative. In October 2012, he was hospitalized for polyarthralgia and impaired general condition. In physical examination, he had vesiculobullous plaque of 10 cm long of the right hand and wrist, infiltrated erythematous plaque on the right leg and another topped with a large pustule at the left ankle. Skin biopsy showed at the back of the right hand an aspect of PG and at the infiltrated plaques of the ankle an aspect of SS. Prednisone was started with improvement of the skin lesions and a recovery condition. The combination of PG and SS has already been described in cases of hematologic malignancy and rarely in UC. There is also the notion of passage from a neutrophilic dermatosis to another. Indeed, a typical lesion initially of SS can evolve to a future PG. This case demonstrates that neutrophilic dermatoses form a continous spectrum of entities that may occur in UC

Page number not for citation purposes 1 Des Furoncles résistants aux antibiotiques: penser à la myiase !!

Les myiases sont des infections parasitaires par des larves de mouches. La localisation cutanée doit être évoquée de retour d'un pays tropical devant une évolution inhabituelle de lésions cutanées. Nous rapportons une observation d'un militaire tunisien, ayant séjourné en République Démocratique du Congo. Il était atteint de myiase cutanée simulatrice d'une furonculose résistante aux antibiotiques. L'intérêt de cette observation est de souligner l'importance d'évoquer la myiase dont le traitement est simple et rapide chez un patient de retour de zone d'endémie.Key words: Furoncles, myiase, mouche

Poussée de maladie de Kaposi et élévation du CA 19-9: Penser à la tuberculose!

La maladie de Kaposi (MK) est une entité pathologique qui peut survenir chez les patients VIH positifs et dans le cadre d'une immunodépression, d'origine tuberculeuse très rarement. On décrit le cas d'une MK chez un patient VIH négatif au décours d'une tuberculose. Nous rapportons le cas d'un patient âgé de 81 ans, VIH négatif, ayant présenté deux nodules angiomateux de l'avant bras gauche dont la biopsie cutanée était en faveur d'une MK. L'évolution était marquée 2 mois plus tard, par  l'apparition de placards angiomateux extensifs des deux membres supérieurs et d'adénopathies cervicales jugulo-carotidiennes bilatérales. La biopsie ganglionnaire était en faveur d'une  tuberculose ganglionnaire. Par ailleurs, il avait un taux sérique élevé des CA 19-9. La régression de l'étendue des lésions au niveau des membres  supérieurs et la  normalisation du taux sérique des CA 19-9 ont été obtenues sous traitement anti-tuberculeux. Chez les patients atteints d'une MK avec une élévation des CA 19-9, il faut penser à la tuberculose

Response of high-risk of recurrence/progression bladder tumours expressing sialyl-Tn and sialyl-6-T to BCG immunotherapy

High risk of recurrence/progression bladder tumours is treated with Bacillus Calmette-Guérin (BCG) immunotherapy after complete resection of the tumour. Approximately 75% of these tumours express the uncommon carbohydrate antigen sialyl-Tn (Tn), a surrogate biomarker of tumour aggressiveness. Such changes in the glycosylation of cell-surface proteins influence tumour microenvironment and immune responses that may modulate treatment outcome and the course of disease. The aim of this work is to determine the efficiency of BCG immunotherapy against tumours expressing sTn and sTn-related antigen sialyl-6-T (s6T). METHODS: In a retrospective design, 94 tumours from patients treated with BCG were screened for sTn and s6T expression. In vitro studies were conducted to determine the interaction of BCG with high-grade bladder cancer cell line overexpressing sTn. RESULTS: From the 94 cases evaluated, 36 had recurrence after BCG treatment (38.3%). Treatment outcome was influenced by age over 65 years (HR=2.668; (1.344-5.254); P=0.005), maintenance schedule (HR=0.480; (0.246-0.936); P=0.031) and multifocality (HR=2.065; (1.033-4.126); P=0.040). sTn or s6T expression was associated with BCG response (P=0.024; P<0.0001) and with increased recurrence-free survival (P=0.001). Multivariate analyses showed that sTn and/or s6T were independent predictive markers of recurrence after BCG immunotherapy (HR=0.296; (0.148-0.594); P=0.001). In vitro studies demonstrated higher adhesion and internalisation of the bacillus to cells expressing sTn, promoting cell death. CONCLUSION: s6T is described for the first time in bladder tumours. Our data strongly suggest that BCG immunotherapy is efficient against sTn- and s6T-positive tumours. Furthermore, sTn and s6T expression are independent predictive markers of BCG treatment response and may be useful in the identification of patients who could benefit more from this immunotherapy

Modulation of Sn concentration in ZnO nanorod array: intensification on the conductivity and humidity sensing properties

Tin (Sn)-doped zinc oxide (ZnO) nanorod arrays (TZO) were synthesized onto aluminum-doped ZnO-coated glass substrate via a facile sonicated sol–gel immersion method for humidity sensor applications. These nanorod arrays were grown at different Sn concentrations ranging from 0.6 to 3 at.%. X-ray diffraction patterns showed that the deposited TZO arrays exhibited a wurtzite structure. The stress/strain condition of the ZnO film metamorphosed from tensile strain/compressive stress to compressive strain/tensile stress when the Sn concentrations increased. Results indicated that 1 at.% Sn doping of TZO, which has the lowest tensile stress of 0.14 GPa, generated the highest conductivity of 1.31 S cm− 1. In addition, 1 at.% Sn doping of TZO possessed superior sensitivity to a humidity of 3.36. These results revealed that the optimum performance of a humidity-sensing device can be obtained mainly by controlling the amount of extrinsic element in a ZnO film

Optoelectronic characterization of CuInGa(S)2 thin films grown by spray pyrolysis for photovoltaic application

[EN] Copper-indium gallium disulfide (CIGS) is a good absorber for photovoltaic application. Thin films of CIGS were prepared by spray pyrolysis on glass substrates in the ambient atmosphere. The films were characterized by different techniques, such as structural, morphological, optical and electrical properties of CIGS films were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), spectrophotometer and Hall effect, respectively. After optimization, the deposited films structure, grain size, and crystallinity became more important with an increase of annealing time at 370 degrees C for 20 min. Transmission electron microscopy (TEM) analysis shows that the interface sheets are well crystallized and the inter planer distance are 0.25 nm, 0.28 nm, and 0.36 nm. The atomic force microscopy (AFM) observation shows that the grain size and roughness can be tolerated by optimizing the annealing time. The strong absorbance and low transmittance were observed for the prepared films with a suitable energy bandgap about 1.46 eV. The Hall effect measurement system examined that CIGS films exhibited optimal electrical properties, resistivity, carrier mobility, and carrier concentration which were determined to be 4.22 x 10(6) omega cm, 6.18 x 10(2) cm(2) V-1 S-1 and 4.22 x 10(6) cm(-3), respectively. The optoelectronic properties of CIGS material recommended being used for the photovoltaic application.Prof. Bouchaib HARTITI, The Senior Associate at ICTP, is very grateful to ICTP for permanent support. Prof. Mohamed Ebn Touhami, Director of the University Center for Analysis, Expertise, Transfer of Technology and Incubation, Kenitra, Morocco, is very grateful to CUA2TI for financial support. Thanks to Doctor Diogo M.F. Santos for the supervision of Amal Bouich's work during her research in CeFEMA research center. The authors also thank researchers from CeFEMA (IST-ULisboa, Portugal) and CUA2TI (FS-Kenitra Morocco) for their help.Bouich, A.; Hartiti, B.; Ullah, S.; Ullah, H.; Ebn Touhami, M.; Santos, DMF.; Marí, B. (2019). Optoelectronic characterization of CuInGa(S)2 thin films grown by spray pyrolysis for photovoltaic application. Applied Physics A. 125(8):1-9. https://doi.org/10.1007/s00339-019-2874-4S191258T. Feurer, P. Reinhard, E. Avancini, B. Bissig, J. Löckinger, P. Fuchs, S. Buecheler, Progress in thin film CIGS photovoltaics–Research and development, manufacturing, and applications. Prog. Photovolt. Res. Appl. 25(7), 645–667 (2017)A. Zegadi, M.A. Slifkin, M. Djamin, A.E. Hill, R.D. Tomlinson, A photoacoustic study of CuInxGa1− xSe2 alloys. Phys. Status Solidi (A) 133(2), 533–540 (1992)T.H. Sajeesh, A.R. Warrier, C.S. Kartha, K.P. Vijayakumar, Optimization of parameters of chemical spray pyrolysis technique to get n and p-type layers of SnS. Thin Solid Films 518(15), 4370–4374 (2010)J. Liu, D. Zhuang, H. Luan, M. Cao, M. Xie, X. Li, Preparation of Cu (In, Ga) Se2 thin film by sputtering from Cu (In, Ga) Se2 quaternary target. Progr. Nat. Sci. Mater. Int. 23(2), 133–138 (2013)M.I. Hossain, Fabrication and characterization of CIGS solar cells with In2 S3 buffer layer deposited by PVD technique. Chalcogenide Lett. 9(5), 185–191 (2012)M.A. Mughal, R. Engelken, R. Sharma, Progress in indium (III) sulfide (In2S3) buffer layer deposition techniques for CIS, CIGS, and CdTe-based thin film solar cells. Sol. Energy 120, 131–146 (2015)M. Powalla, M. Cemernjak, J. Eberhardt, F. Kessler, R. Kniese, H.D. Mohring, B. Dimmler, Large-area CIGS modules: Pilot line production and new developments. Sol. Energy Mater Sol. Cells 90(18–19), 3158–3164 (2006)M.E. Calixto, P.J. Sebastian, R.N. Bhattacharya, R. Noufi, Compositional and optoelectronic properties of CIS and CIGS thin films formed by electrodeposition. Sol. Energy Mater. Sol. Cells 59(1–2), 75–84 (1999)S. Jung, S. Ahn, J.H. Yun, J. Gwak, D. Kim, K. Yoon, Effects of Ga contents on properties of CIGS thin films and solar cells fabricated by co-evaporation technique. Curr. Appl. Phys. 10(4), 990–996 (2010)S. R. Ovshinsky, X. Deng, R. Young, U.S. Patent No. 5,231,047. Washington, DC: U.S. Patent and Trademark Office (1993).M. Kaelin, D. Rudmann, A.N. Tiwari, Low cost processing of CIGS thin film solar cells. Sol. Energy 77(6), 749–756 (2004)Fangdan Jiang, Jiayou Feng, Effect of temperature on selenization process of metallic Cu–In alloy precursors. Thin Solid Films 515(4), 1950–1955 (2006)S. Shirakata, Y. Kannaka, H. Hasegawa, T. Kariya, S. Isomura, Properties of Cu (In, Ga) Se2 thin films prepared by chemical spray pyrolysis. Jpn. J. Appl. Phys. 38(9R), 4997 (1999)Y.K. Kumar, G.S. Babu, P.U. Bhaskar, V.S. Raja, Effect of starting-solution pH on the growth of Cu2ZnSnS4 thin films deposited by spray pyrolysis. Phys. Status Solidi (A) 206(7), 1525–1530 (2009)M. Ajili, M. Castagné, N.K. Turki, Characteristics of CuIn1− xGaxS2 thin films synthesized by chemical spray pyrolysis. J. Lumin. 150, 1–7 (2014)B.J. Babu, S. Velumani, A. Kassiba, R. Asomoza, J.A. Chavez-Carvayar, J. Yi, Deposition and characterization of graded Cu (In1-xGax) Se2 thin films by spray pyrolysis. Mater. Chem. Phys. 162, 59–68 (2015)S.F. Varol, G. Babür, G. Çankaya, U. Kölemen, Synthesis of sol–gel derived nano-crystalline ZnO thin films as TCO window layer: effect of sol aging and boron. RSC Adv. 4(100), 56645–56653 (2014)J.A. Frantz, R.Y. Bekele, V.Q. Nguyen, J.S. Sanghera, A. Bruce, S.V. Frolov, I.D. Aggarwal, Cu (In, Ga) Se2 thin films and devices sputtered from a single target without additional selenization. Thin Solid Films 519(22), 7763–7765 (2011)C. Calderón, G. Gordillo, P. Bartolo-Pérez, F. Mesa, Effect of the deposition conditions on the optical, morphological and compositional properties of CuIn1− xGaxSe2 thin films prepared by a multistage process. Revista Mexicana de Física 53(7), 270–273 (2007)D. Schmid, M. Ruckh, F. Grunwald, H.W. Schock, Chalcopyrite/defect chalcopyrite heterojunctions on the basis of CuInSe2. J. Appl. Phys. 73(6), 2902–2909 (1993)U.C. Matur, S. Akyol, N. Baydoğan, H. Cimenoglu, The optical properties of CIGS thin films derived by sol-gel dip coating process at different withdrawal speed. Proc. Soc. Behav. Sci. 195, 1762–1767 (2015)A. Bouich, B. Hartiti, S. Ullah, M.E. Touhami, B. Mari, D.M.F. Santos, Investigation of the optical properties of CuIn (Se, S)2 thin films for photovoltaic application. Mater. Today Proc. 13, 663–669 (2019)K. Matsumura, T. Fujita, H. Itoh, D. Fujita, Characterization of carrier concentration in CIGS solar cells by scanning capacitance microscopy. Meas. Sci. Technol. 25(4), 044020 (2014)A. Bouich, B. Hartiti, S. Ullah, H. Ullah, M.E. Touhami, D.M.F. Santos, B. Mari, Experimental, theoretical, and numerical simulation of the performance of CuInxGa(1–x) S2 based solar cells. Optik 183, 137–147 (2019

The I4U Mega Fusion and Collaboration for NIST Speaker Recognition Evaluation 2016

The 2016 speaker recognition evaluation (SRE'16) is the latest edition in the series of benchmarking events conducted by the National Institute of Standards and Technology (NIST). I4U is a joint entry to SRE'16 as the result from the collaboration and active exchange of information among researchers from sixteen Institutes and Universities across 4 continents. The joint submission and several of its 32 sub-systems were among top-performing systems. A lot of efforts have been devoted to two major challenges, namely, unlabeled training data and dataset shift from Switchboard-Mixer to the new Call My Net dataset. This paper summarizes the lessons learned, presents our shared view from the sixteen research groups on recent advances, major paradigm shift, and common tool chain used in speaker recognition as we have witnessed in SRE'16. More importantly, we look into the intriguing question of fusing a large ensemble of sub-systems and the potential benefit of large-scale collaboration.Peer reviewe

Examining the role of three sets of innovation attributes for determining adoption of the interbank mobile payment service

The interbank mobile payment service (IMPS) is a very recent technology in India that serves the very critical purpose of a mobile wallet. To account for the adoption and use of IMPS by the Indian consumers, this study seeks to compare three competing sets of attributes borrowed from three recognized pieces of work in the area of innovations adoption. This study aims to examine which of the three sets of attributes better predicts the adoption of IMPS in an Indian context. The research model is empirically tested and validated against the data gathered from 323 respondents from different cities in India. The findings are analysed using the SPSS analysis tool, which are then discussed to derive the key conclusions from this study. The research implications are stated, limitations listed and suggestions for future research on this technology are then finally made