12,172 research outputs found
Sidelobe Control in Collaborative Beamforming via Node Selection
Collaborative beamforming (CB) is a power efficient method for data
communications in wireless sensor networks (WSNs) which aims at increasing the
transmission range in the network by radiating the power from a cluster of
sensor nodes in the directions of the intended base station(s) or access
point(s) (BSs/APs). The CB average beampattern expresses a deterministic
behavior and can be used for characterizing/controling the transmission at
intended direction(s), since the mainlobe of the CB beampattern is independent
on the particular random node locations. However, the CB for a cluster formed
by a limited number of collaborative nodes results in a sample beampattern with
sidelobes that severely depend on the particular node locations. High level
sidelobes can cause unacceptable interference when they occur at directions of
unintended BSs/APs. Therefore, sidelobe control in CB has a potential to
increase the network capacity and wireless channel availability by decreasing
the interference. Traditional sidelobe control techniques are proposed for
centralized antenna arrays and, therefore, are not suitable for WSNs. In this
paper, we show that distributed, scalable, and low-complexity sidelobe control
techniques suitable for CB in WSNs can be developed based on node selection
technique which make use of the randomness of the node locations. A node
selection algorithm with low-rate feedback is developed to search over
different node combinations. The performance of the proposed algorithm is
analyzed in terms of the average number of trials required to select the
collaborative nodes and the resulting interference. Our simulation results
approve the theoretical analysis and show that the interference is
significantly reduced when node selection is used with CB.Comment: 30 pages, 10 figures, submitted to the IEEE Trans. Signal Processin
Recommended from our members
Optimum design of composite prestressed concrete girder railway bridges
This paper deals with the formulation of design optimisation of pretsressed concrete bridges. The bridge is of a slab-on-girder type, hence modeled as an equivalent orthotropic plate. The whole bridge system is considered as a simply supported right angle plate. Following linear elastic behaviour, the governing fourth order differential equation of the plate for patch load is solved in order to find out load distribution on the girders forming the bridge as well as the deflections and internal forces at critical sections of the whole bridge. The optimisation problem is formulated for various cross sectional geometries including rectangular, symmetrical I, unsymmetrical I, box, T and inverted T sections. The design variables are the main cross sectional dimensions, prestressing force and tendon eccentricity. The objective function comprises the cost of concrete material, formwork and prestressing steel tendons. The constraint functions are set to satisfy design requirements as per British Standards for bridges (BS 5400). Nonlinear optimisation method based on sequential unconstrained minimisation technique (SUMT) is employed to achieve optimum bridge configuration for specific design parameters of span length, concrete compressive strength and railway loading patterns. A purpose built computer program is set up to carry out the solution of the design optimisation problem efficiently in terms of time and effort. A typical example of unsymmetrical I-section having a small bottom flange as compared to the top flange width with composite deck effect is presented. The results show that the total cost increases as the span increases due to the increase of the initial prestressing force. Furthermore, the total cost decreases as the concrete compressive strength increases in spite of the increasing of the prestressing force. This is due to decrease of the overall depth, top and bottom flange widths, hence leading to a smaller girder size. Such finding will encourage engineers to adopt high strength concrete for bridges as it will help reducing not only the initial cost but also the life cycle cost of the bridge over its entire life
Assessment of Newspaper Circulation and Readership in Northern Ghana
There is a widespread concern that the print newspaper industry across the world and in Ghana particularly faces an uncertain future and a long-term decline in readership and circulation due to the prevalence of internet mediated News websites, making print newspapers obsolete in their present format. This paper is an assessment of the circulation and readership of printed newspapers in the northern regional capital, Tamale. It investigates preferred News sources among newsreaders and examines consumption pattern of newspapers in the metropolis. It discussed the challenges the print media industry faces in the wake of News websites’ proliferation in the Ghanaian media landscape. The paper is based on exploratory research design. It sampled four leading print newspapers in Ghana (Daily Graphic, Daily Guide, Ghanaian Times and Business and Financial Times) as reference points for data collection. Four newspaper vendors who vend these newspapers in the metropolis were sampled through simple random sampling. The paper finds a sharp decline in circulation and readership of printed newspaper in the metropolis in favour of internet powered News websites. The paper concludes that although newsreaders prefer sourcing News online, they still find the traditional printed media as the most credible and reliable sources for News. The paper recommends that the traditional print media take advantage of the reach of internet powered platforms to create online presence and ensure that they innovate to get newsreaders subscribe to their brands since print newspaper readership is gradually declining in the metropolis
On the Effect of Correlated Measurements on the Performance of Distributed Estimation
We address the distributed estimation of an unknown scalar parameter in
Wireless Sensor Networks (WSNs). Sensor nodes transmit their noisy observations
over multiple access channel to a Fusion Center (FC) that reconstructs the
source parameter. The received signal is corrupted by noise and channel fading,
so that the FC objective is to minimize the Mean-Square Error (MSE) of the
estimate. In this paper, we assume sensor node observations to be correlated
with the source signal and correlated with each other as well. The correlation
coefficient between two observations is exponentially decaying with the
distance separation. The effect of the distance-based correlation on the
estimation quality is demonstrated and compared with the case of unity
correlated observations. Moreover, a closed-form expression for the outage
probability is derived and its dependency on the correlation coefficients is
investigated. Numerical simulations are provided to verify our analytic
results.Comment: 5 page
Photonic circuits for generating modal, spectral, and polarization entanglement
We consider the design of photonic circuits that make use of Ti:LiNbO
diffused channel waveguides for generating photons with various combinations of
modal, spectral, and polarization entanglement. Down-converted photon pairs are
generated via spontaneous optical parametric down-conversion (SPDC) in a
two-mode waveguide. We study a class of photonic circuits comprising: 1) a
nonlinear periodically poled two-mode waveguide structure, 2) a set of
single-mode and two-mode waveguide-based couplers arranged in such a way that
they suitably separate the three photons comprising the SPDC process, and, for
some applications, 3) a holographic Bragg grating that acts as a dichroic
reflector. The first circuit produces frequency-degenerate down-converted
photons, each with even spatial parity, in two separate single-mode waveguides.
Changing the parameters of the elements allows this same circuit to produce two
nondegenerate down-converted photons that are entangled in frequency or
simultaneously entangled in frequency and polarization. The second photonic
circuit is designed to produce modal entanglement by distinguishing the photons
on the basis of their frequencies. A modified version of this circuit can be
used to generate photons that are doubly entangled in mode number and
polarization. The third photonic circuit is designed to manage dispersion by
converting modal, spectral, and polarization entanglement into path
entanglement
On Cohomology Groups of Four-Dimensional Nilpotent Associative Algebras
تعد دراسة الزمر الكوهومولوجية واحدة من أكثر البحوث المكثفة والمثيرة والتي قد نشأت من التبولوجيا الجبرية. حيث يعتبرالبعد للزمر الكوهومولوجية على وجه الخصوص ثابت في غاية الفائدة ويلعب دورآ هامآ في التصنيف الهندسي للجبر التجميعي. هذا العمل يركز على تطبيقات الزمر الكوهومولوجية ذات الابعاد المنخفضة. في هذا الخصوص, الزمر الكوهومولوجية المنخفضة للجبر التجميعي عديم القوى ذات البعد الرابع تم وصفهاعلى شكل مصفوفة.The study of cohomology groups is one of the most intensive and exciting researches that arises from algebraic topology. Particularly, the dimension of cohomology groups is a highly useful invariant which plays a rigorous role in the geometric classification of associative algebras. This work focuses on the applications of low dimensional cohomology groups. In this regards, the cohomology groups of degree zero and degree one of nilpotent associative algebras in dimension four are described in matrix form
Towards a Theory of Digital Stigma and Deep Fake Video Technology Stigmatization in a Digitally Mediated Environment
As social structures and IT becomes intertwined, there is a need for new theoretical perspectives that advance understanding of this intertwinement and its implications for IT and social actors, institutions, and society. This research attempts to develop a theory that conceptualizes the role of technology in creating and manipulating stigma symbols and the subsequent consequences of the resultant symbolic interaction on the social actors, technology, and society. Understanding the changing nature of stigma due to technology is essential in understanding resulting societal manifestations and aids in the timely management of societal implications of the dark side of technology
The Study of Optical and Electrical Properties of Nanostructured Silicon Carbide Thin Films Grown by Pulsed-Laser Deposition
In this paper, nanostructured silicon carbide (SiC) thin films are deposited onto glass substrate using pulsed laser deposition technique. Electrical and optical characterizations such as conductivity, resistivity, transmission, Seeback effect, absorption, absorption coefficient, energy band gap, and extinction coefficient as a function of photon energy, and the effect of thin films thickness on transmission are carried out to characterize the prepared samples. Results showed that the prepared SiC thin film is an n-type semiconductor with an indirect bandgap of ~3 eV, 448 nm cutoff wavelength, 3.4395 × 104 cm−1 absorption coefficient and 0.154 extinction coefficient. The surface morphology of the SiC thin films is studied using scanning electron microscope at a substrate temperature of 400 °C and it is found that the grain size of the prepared SiC thin film is about 30 nm. As such, the nano thin films optical and structural characteristics enable the films to be used as gases sensors in many optoelectronic devices such as the environment and ultraviolet photodiode
Design and implementation of remotely monitoring system for pH level in Baghdad drinking water networks
Many people in the recent days have suffering from number of diseases due to unsafe and impure drinking water, especially in rural areas. As typical laboratory experiments and official water quality tests take considerable amount of time to obtain results and due to non availability of a simple device that can measure such water quality parameters in real time, therefore in this paper a remote pH level monitoring system for Baghdad drinking water system is proposed. A PH level sensing and monitoring nodes are distributed at different location. These nodes are proactively measured pH level of water and send data to the maintenance center to give them overall picture about pH level via global position system (GSM). This proposed system gives a robust, low-cost and effective method for the drinking water maintenance center to measure and monitoring the water quality in real time environment
- …