Influence of slim rod material properties to the Siemens feed rod and the float zone process

The identification and understanding of material properties influencing the float zone process is important to crystallize high purity silicon for high efficiency solar cells. Also the knowledge of minimal requirements to crystallize monocrystalline silicon with the float zone process is of interest from an economic point of view. In the present study, feed rods for the float zone process composed of a central slim rod and the deposited silicon from the Siemens process are investigated. Previous studies have shown that the slim rod has a significant impact on the purity and suitability for further crystallization processes. In particular, contaminations like substitutional carbon and the presence of precipitates as well as the formation of oxide layers play an important role and are investigated in detail. For this purpose different slim rod materials were used in deposition and float zone crystallization experiments. Samples were prepared by cross sectioning and core drilling of Siemens rods, which were recrystallized with the float zone process. Recrystallized drilled cores are analyzed with FT-IR spectrometry concerning the carbon and oxygen content. To estimate the grain growth behavior on the slim rod surface in dependence of the used slim rod material, EBSD mappings inside a SEM are performed on squared and circular slim rods. TEM analysis was used to investigate the presence of an oxide layer at the interface between slim rod and deposited polycrystalline silicon. Additionally the influence of a nitrogen-containing gas atmosphere during the slim rod pulling is investigated by IR microscopy and ToF-SIMS regarding Si3N4 precipitation

Structural and chemical investigations of adapted Siemens feed rods for an optimized float zone process

The optimization of the float zone process for industrial application is a promising way to crystallize high purity silicon for high efficiency solar cells with reduced process costs. We investigated two differently produced Siemens rods which should be used as feed material for the float zone process. The aim is to identify and to improve material properties of the feed rods which have a high impact to the float zone process. We show here microstructural and chemical analysis comparing feed rods manufactured under standard conditions and under float zone adapted conditions. To resolve the growth behavior of the grains SEM/EBSD mappings are performed at different positions. TEM analyses are used to investigate the interface region between the mono- and the multicrystalline silicon within the Siemens feed rod. Additionally, drilled cores are cut out from the feed rods containing the region of the slim rod. Afterwards, the drilled cores are crystallized with the float zone process. Finally, carbon and oxygen measurements with FT-IR spectrometry on different positions of the crystallized drilled cores of the Siemens feed rods show the influence of the slim rod material to the float zone process

Cancer-selective, single agent chemoradiosensitising gold nanoparticles

Two nanometre gold nanoparticles (AuNPs), bearing sugar moieties and/or thiol-polyethylene glycol-amine (PEG-amine), were synthesised and evaluated for their in vitro toxicity and ability to radiosensitise cells with 220 kV and 6 MV X-rays, using four cell lines representing normal and cancerous skin and breast tissues. Acute 3 h exposure of cells to AuNPs, bearing PEG-amine only or a 50:50 ratio of alpha-galactose derivative and PEG-amine resulted in selective uptake and toxicity towards cancer cells at unprecedentedly low nanomolar concentrations. Chemotoxicity was prevented by co-administration of N-acetyl cysteine antioxidant, or partially prevented by the caspase inhibitor Z-VAD-FMK. In addition to their intrinsic cancer-selective chemotoxicity, these AuNPs acted as radiosensitisers in combination with 220 kV or 6 MV X-rays. The ability of AuNPs bearing simple ligands to act as cancer-selective chemoradiosensitisers at low concentrations is a novel discovery that holds great promise in developing low-cost cancer nanotherapeutics

Density functional study of Aun_n (n=2-20) clusters: lowest-energy structures and electronic properties

We have investigated the lowest-energy structures and electronic properties of the Au$_n$(n=2-20) clusters based on density functional theory (DFT) with local density approximation. The small Au$_n$ clusters adopt planar structures up to n=6. Tabular cage structures are preferred in the range of n=10-14 and a structural transition from tabular cage-like structure to compact near-spherical structure is found around n=15. The most stable configurations obtained for Au$_{13}$ and Au$_{19}$ clusters are amorphous instead of icosahedral or fcc-like, while the electronic density of states sensitively depend on the cluster geometry. Dramatic odd-even alternative behaviors are obtained in the relative stability, HOMO-LUMO gaps and ionization potentials of gold clusters. The size evolution of electronic properties is discussed and the theoretical ionization potentials of Au$_n$ clusters compare well with experiments.Comment: 6 pages, 7 figure

Wider Access to Genotypic Space Facilitates Loss of Cooperation in a Bacterial Mutator

Understanding the ecological, evolutionary and genetic factors that affect the expression of cooperative behaviours is a topic of wide biological significance. On a practical level, this field of research is useful because many pathogenic microbes rely on the cooperative production of public goods (such as nutrient scavenging molecules, toxins and biofilm matrix components) in order to exploit their hosts. Understanding the evolutionary dynamics of cooperation is particularly relevant when considering long-term, chronic infections where there is significant potential for intra-host evolution. The impact of responses to non-social selection pressures on social evolution is arguably an under-examined area. In this paper, we consider how the evolution of a non-social trait – hypermutability – affects the cooperative production of iron-scavenging siderophores by the opportunistic human pathogen Pseudomonas aeruginosa. We confirm an earlier prediction that hypermutability accelerates the breakdown of cooperation due to increased sampling of genotypic space, allowing mutator lineages to generate non-cooperative genotypes with the ability to persist at high frequency and dominate populations. This may represent a novel cost of hypermutability

astroplan: An Open Source Observation Planning Package in Python

We present astroplan - an open source, open development, Astropy affiliated package for ground-based observation planning and scheduling in Python. astroplan is designed to provide efficient access to common observational quantities such as celestial rise, set, and meridian transit times and simple transformations from sky coordinates to altitude-azimuth coordinates without requiring a detailed understanding of astropy's implementation of coordinate systems. astroplan provides convenience functions to generate common observational plots such as airmass and parallactic angle as a function of time, along with basic sky (finder) charts. Users can determine whether or not a target is observable given a variety of observing constraints, such as airmass limits, time ranges, Moon illumination/separation ranges, and more. A selection of observation schedulers are included which divide observing time among a list of targets, given observing constraints on those targets. Contributions to the source code from the community are welcome

In vitro evaluation of antibiotics' combinations for empirical therapy of suspected methicillin resistant Staphylococcus aureus severe respiratory infections

<p>Abstract</p> <p>Background</p> <p>Methicillin resistant <it>Staphylococcus aureus </it>(MRSA) is an increasingly common cause of nosocomial infections, causing severe morbidity and mortality worldwide, and accounting in some hospitals for more than 50% of all <it>S. aureus </it>diseases. Treatment of infections caused by resistant bacterial pathogens mainly relies on two therapeutic modalities: development of new antimicrobials and use of combinations of available antibiotics.</p> <p>Combinations of antibiotics used in the empiric treatment of infections with suspected methicillin resistant <it>Staphylococcus aureus </it>etiology were investigated.</p> <p>Methods</p> <p>Double (vancomycin or teicoplanin with either levofloxacin or cefotaxime) and triple (vancomycin or teicoplanin + levofloxacin + one among amikacin, ceftazidime, cefepime, imipenem, piperacillin/tazobactam) combinations were evaluated by means of checkerboard assay and time kill curves. Mutational rates of single and combined drugs at antimicrobial concentrations equal to the resistance breakpoints were also calculated.</p> <p>Results</p> <p>Vancomycin or teicoplanin + levofloxacin showed synergy in 16/50 and in 9/50 strains respectively, while vancomycin or teicoplanin + cefotaxime resulted synergic for 43/50 and 23/50 strains, respectively. Triple combinations, involving teicoplanin, levofloxacin and ceftazidime or piperacillin/tazobactam gave synergy in 20/25 strains. Teicoplanin + levofloxacin gave synergy in triple combinations more frequently than vancomycin + levofloxacin.</p> <p>For single antibiotics, mutational frequencies ranged between 10^-5and <10^-9for levofloxacin, cefotaxime, amikacin and imipenem, and <10^-9for vancomycin and teicoplanin. When tested in combinations, mutational frequencies fell below 10^-9for all the combinations.</p> <p>Conclusion</p> <p><it>In vitro </it>evidence of synergy between glycopeptides, fluoroquinolones (levofloxacin) and β-lactams and of reduction of mutational frequencies by combinations are suggestive for a potential role in empirical therapy of severe pneumonia with suspected MRSA etiology.</p

Electronic Structure and Bonding of Icosahedral Core-Shell Gold-Silver Nanoalloy Clusters Au_(144-x)Ag_x(SR)_60

Atomically precise thiolate-stabilized gold nanoclusters are currently of interest for many cross-disciplinary applications in chemistry, physics and molecular biology. Very recently, synthesis and electronic properties of "nanoalloy" clusters Au_(144-x)Ag_x(SR)_60 were reported. Here, density functional theory is used for electronic structure and bonding in Au_(144-x)Ag_x(SR)_60 based on a structural model of the icosahedral Au_144(SR)_60 that features a 114-atom metal core with 60 symmetry-equivalent surface sites, and a protecting layer of 30 RSAuSR units. In the optimal configuration the 60 surface sites of the core are occupied by silver in Au_84Ag_60(SR)_60. Silver enhances the electron shell structure around the Fermi level in the metal core, which predicts a structured absorption spectrum around the onset (about 0.8 eV) of electronic metal-to-metal transitions. The calculations also imply element-dependent absorption edges for Au(5d) \rightarrow Au(6sp) and Ag(4d) \rightarrow Ag(5sp) interband transitions in the "plasmonic" region, with their relative intensities controlled by the Ag/Au mixing ratio.Comment: 4 figure