DEAR project: Lunar dust surface interactions, risk and removal investigations

The DEAR project (Dusty Environment Application Research) investigates the interaction between lunar regolith and surfaces and components relevant for lunar exploration. Based on the TUBS regolith simulant which is representative in chemistry, size and shape properties to Moon soils to study the regolith transport, adhesion and strategies for cleaning. The regolith simulant will be applied to thermal, structural, optical sensor, sealing and other astronautic systems, providing input for requirements, justification and verification. The key applications are split in human space flight regolith investigations, wrinkled surface with random movement and hardware surfaces, flat material defined movement. The paper provides an overview of the DEAR project including a discussion of the first results, in particular vibration, shock and micro-vibration on regolith bearing surfaces. The investigation shall enable better understand the regolith layers interaction and the release mechanism, as well as potential cross contamination and cleaning strategies. The research is complemented by simulation of the regolith motion as parameter surface plasma interactions. The project is funded and supported by the European Space Agency (ESA). DEAR specifically addresses the development and testing of lunar dust removal strategies on optics, mechanisms and human space flight hardware (e.g., space suits). As the Moons regolith is known to be highly abrasive, electrically chargeable, and potentially chemically reactive, lunar dust might reduce the performance of hardware, such as cameras, thermal control surfaces and solar cells. The dust can cause malfunction on seals for on/off mechanisms or space suits. Of particular interest are risk assessment, avoidance, and cleaning techniques such as the use of electric fields to remove lunar dust from surfaces. Representative dust (e.g., regolith analogues of interesting landing sites) will be used in a dedicated test setup to evaluate risks and effects of lunar dust. We describe designs and methods developed by the DEAR consortium to deal with the regolith-related issues, in particular an electrode design to deflect regolith particles, cleaning of astronautical systems with CO2, design of a robotic arm for the testing within the DEAR chamber, regolith removal via shock, and regolith interaction with cleanroom textile

Cylindrospermopsin is effectively degraded in water by pulsed corona-like and dielectric barrier discharges

Cylindrospermopsin (CYN) is an important cyanobacterial toxin posing a major threat to surface waters during cyanobacterial blooms. Hence, methods for cyanotoxin removal are required to confront seasonal or local incidences to sustain the safety of potable water reservoirs. Non-thermal plasmas provide the possibility for an environmentally benign treatment which can be adapted to specific concentrations and environmental conditions without the need of additional chemicals. We therefore investigated the potential of two different non-thermal plasma approaches for CYN degradation, operated either in a water mist, i.e. in air, or submerged in water. A degradation efficacy of 0.03 +/- 0.00 g kWh(-1) L-1 was found for a dielectric barrier discharge (DBD) operated in air, while a submerged pulsed corona-like discharge resulted in an efficacy of 0.24 +/- 0.02 g kWh(-1) L-1. CYN degradation followed a pseudo zeroth order or pseudo first order reaction kinetic, respectively. Treatment efficacy of the corona-like discharge submerged in water increased with pH values of the initial solution changing from 5.0 to 7.5. Notably, a pH-depending residual oxidative effect was observed for the submerged discharge, resulting in ongoing CYN degradation, even without further plasma treatment. In this case hydroxyl radicals were identified as the dominant oxidants of CYN at acidic pH values. In comparison, degradation by the DBD could be related primarily to the generation of ozone

A review of combined advanced oxidation technologies for the removal of organic pollutants from water

Water pollution through natural and anthropogenic activities has become a global problem causing short-and long-term impact on human and ecosystems. Substantial quantity of individual or mixtures of organic pollutants enter the surface water via point and nonpoint sources and thus affect the quality of freshwater. These pollutants are known to be toxic and difficult to remove by mere biological treatment. To date, most researches on the removal of organic pollutants from wastewater were based on the exploitation of individual treatment process. This single-treatment technology has inherent challenges and shortcomings with respect to efficiency and economics. Thus, application of two advanced treatment technologies characterized with high efficiency with respect to removal of primary and disinfection by-products in wastewater is desirable. This review article focuses on the application of integrated technologies such as electrohydraulic discharge with heterogeneous photocatalysts or sonophotocatalysis to remove target pollutants. The information gathered from more than 100 published articles, mostly laboratories studies, shows that process integration effectively remove and degrade recalcitrant toxic contaminants in wastewater better than single-technology processing. This review recommends an improvement on this technology (integrated electrohydraulic discharge with heterogeneous photocatalysts) viz-a-vis cost reduction in order to make it accessible and available in the rural and semi-urban settlement. Further recommendation includes development of an economic model to establish the cost implications of the combined technology. Proper monitoring, enforcement of the existing environmental regulations, and upgrading of current wastewater treatment plants with additional treatment steps such as photocatalysis and ozonation will greatly assist in the removal of environmental toxicants