Le partenariat économique et financier euro-méditerranéen.

Au moment où la France, soutenue par l’Italie et l’Espagne, propose la création d’une Union pour la Méditerranée, le bilan économique et financier des douze années du partenariat de Barcelone entre l’Union européenne et les pays du pourtour méditerranéen reste mitigé.intégration régionale, banques centrales, Union européenne, pays partenaires méditerranéens, PPM, transferts des migrants, Alena, commerce international, investissement, IDE.

A strategic framework for improving food security in Arab countries

In 2007 and the first half of 2008, a sharp rise in agricultural commodity and food prices triggered grave concerns about food security, malnutrition and increased poverty. While the threat of a prolonged food-price shock receded in the second half of 2008, many factors underlying the price volatility are likely to persist, and will require careful management if future food-price shocks are to be avoided. This paper suggests three strategies that, together, could reduce vulnerability to price shocks: (1) strengthen safety nets, improve access to family planning services, and promote education; (2) enhance domestic food production and improve rural livelihoods through increased investment in research and development to increase productivity; and (3) reduce exposure to market volatility through more efficient supply chains and better use of financial instruments to hedge risk. The challenge of food security will require a global response, involving governments, international and regional funding and lending institutions, United Nations agencies, non-governmental organizations, civil society, and the private sector

Synthesis, crystallographic characterization, and mechanical behavior of alumina chromia alloys

Powder mixtures of Alumina and Chromia, blended in different proportions (1, 3, 5 and 10%wt) by attrition milling, were fired either by pressureless sintering in air and hot pressing under vacuum. The resulting materials, characterized by X-ray diffraction, Raman spectroscopy, SEM, hardness and fracture toughness showed that all the compositions form complete solid solution which maintain the same crystal structures of corundum; chromia addition retards materials' densification of pressureless fired samples but not that of hot-pressed samples. Data from Raman spectroscopy and SEM/EDXS showed the appearance of Ti- and Mn-based impurities near the indentation print, in particular on fractured grains. The addition of chromia improves hardness, but does not affect toughness which is, on the other hand, greatly influenced by materials\u2019 residual porosity

The use of ALD and PVD coatings as defect sealants to increase the corrosion resistance of thermal spray coatings

Thermal spray coatings are widely used to improve the surface properties of materials, in particular the wear and oxidation resistance. Nevertheless, the corrosion resistance is slightly increased due to the fact that this type of coatings present some internal defects (pores, cracks) that allow the corrosive media to penetrate up to the substrate, that undergoes to corrosion degradation. The amount of these defects is strongly influenced by both the deposition technique and the material deposited. The aim of this work is to seal the internal porosities of the thermal spray coatings by the use of both PVD and ALD coatings or the combination of the two. The thermal spray coating analysed in this work is a pure alumina coating, deposited by Air Plasma Spray (APS) technique, that has been sealed with CrN coating, deposited by PVD (Physical Vapour Deposition) technique, and/or TiO2 coatings, deposited by ALD (Atomic Layer Deposition). The substrate used is a common medium C steel. The samples were then characterized in order to determine the microstructure (SEM+EDXS, light microscope) and the chemical composition (Rf-GDOES elemental profiling), that is important to determine the depth of penetration of the PVD and/or ALD coating inside the thermal spray deposit. Afterwards, a detailed electrochemical characterization in 3,5wt% NaCl aqueous solution was performed to verify the efficiency of the sealant treatment. In detail, a monitor in function of the time of the OCP potential was performed up to 24h of immersion time. In addition, potentiodynamic tests were performed using a 3 electrode electrochemical cell (CE: Pt wire, RE: Ag/AgCl). The same tests were then performed on the same samples that present an artificial defect produced by Rf-GDOES. The main goal of these tests is to determine the maximum depth of a defect that can allow the corrosive media to penetrate the thermal spray coating. Preliminary results showed that the use of PVD and ALD coatings as sealants can reduce the permeation of the corrosive media on the substrate

Fractal trajectories in a numerical model of the upper Indian Ocean

International audienceA wind-driven numerical model of the Indian Ocean is used to examine the horizontal statistics of hundreds of passive tracers spread evenly over the model domain. The distribution covers several dynamically distinct regions, revealing a variety of Lagrangian behaviours associated with different geographic locations. In particular, a cluster of trajectories with scaling dimension as large as 1.3 exists throughout the equatorial zone. Spectral analysis of trajectory displacements indicates mixed Rossby-gravity waves are involved in the production of some fractal trajectories

Effect of powder recycling on inclusion content and distribution in AISI 316L produced by L-PBF technique

AISI 316 L stainless steel is widely used as material to produce components by means of additive manufacturing. To increase the circular economy, the powders are collected and re-used after the printing process, thus the effect of powder recycling on microstructure and properties of printed components is of the utmost importance. This work focused the attention on non-metallic inclusions by examining virgin and recycled powders, and products printed by using both types of powders in a laser powder bed fusion (L-PBF) process. Recycled powders exhibit an irregular shape due to fragmentation, spatters and satellites and, compared to the virgin ones, have a higher gas (O, H and C) content. Both powders contain non-metallic inclusions with a larger quantity in the recycled ones. The printed samples have a similar microstructure, however those produced by using recycled powders exhibit voids of larger size and a little greater amount of inclusions. XRD and EDS examinations of inclusions extracted from the metallic matrix showed that they consist of a mix of amorphous and crystalline silica. Large part of these particles are already present in virgin powders and only a minor part forms during repeated printing operations. Accordingly, the quality of virgin powders is the factor that mainly affects the inclusion content of printed products indicating that the powder production process is the most critical stage of the whole manufacturing process

A sintaxe em gramáticas de português do século XIX "à l’usage des français"

RESUMO O trabalho que se apresenta constitui um estudo de matérias sintáticas de gramáticas de português como língua estrangeira (PLE) do século XIX, dirigidas a um público-alvo francês: - A matéria sintática em apreço foca um conjunto de conceitos relativamente estáveis no quadro das ideias linguísticas, organizados nos seguintes grupos em lógica, ora de confronto, ora de complementaridade: sintaxe e/ou construção; proposição e frase; regime, complemento e subordinação. - As referidas gramáticas de PLE constituem o corpus de obras metalinguísticas de português L2, editadas entre o ano VIII (1799-1800) do calendário republicano francês e 1894, que foi possível recensear até ao momento. - Com respeito ao público-alvo, considera-se a sua relação com os textos metalinguísticos no que toca a procedimentos e metodologias da descrição gramatical que contemplam a proximidade estrutural das línguas alvo (português) e materna (francês)