1,906 research outputs found
TeV gamma-rays from photo-disintegration/de-excitation of cosmic-ray nuclei
It is commonly assumed that high-energy gamma-rays are made via either purely
electromagnetic processes or the hadronic process of pion production, followed
by decay. We investigate astrophysical contexts where a third process (A*) may
dominate, namely the photo-disintegration of highly boosted nuclei followed by
daughter de-excitation. Starbust regions such as Cygnus OB2 appear to be
promising sites for TeV gamma-ray emission via this mechanism. A unique feature
of the A* process is a sharp energy minimum ~ 10 TeV/(T/eV) for gamma-ray
emission from a thermal region of temperature T. We also check that a diffuse
gamma-ray component resulting from the interaction of a possible extreme-energy
cosmic-ray nuclei with background radiation is well below the observed EGRET
data. The A* mechanism described herein offers an important contribution to
gamma-ray astronomy in the era of intense observational activity.Comment: To be published in Phys. Rev. Let
Evaluation of resistive-plate-chamber-based TOF-PET applied to in-beam particle therapy monitoring
Particle therapy is a highly conformal radiotherapy technique which reduces the dose deposited to the surrounding normal tissues. In order to fully exploit its advantages, treatment monitoring is necessary to minimize uncertainties related to the dose delivery. Up to now, the only clinically feasible technique for the monitoring of therapeutic irradiation with particle beams is Positron Emission Tomography (PET). In this work we have compared a Resistive Plate Chamber (RPC)-based PET scanner with a scintillation-crystal-based PET scanner for this application. In general, the main advantages of the RPC-PET system are its excellent timing resolution, low cost, and the possibility of building large area systems. We simulated a partial-ring scannerbeam monitoring, which has an intrinsically low positron yield compared to diagnostic PET. In addition, for in-beam PET there is a further data loss due to the partial ring configuration. In order to improve the performance of the RPC-based scanner, an improved version of the RPC detector (modifying the thickness of the gas and glass layers), providing a larger sensitivity, has been simulated and compared with an axially extended version of the crystal-based device. The improved version of the RPC shows better performance than the prototype, but the extended version of the crystal-based PET outperforms all other options. based on an RPC prototype under construction within the Fondazione per Adroterapia Oncologica (TERA). For comparison with the crystal-based PET scanner we have chosen the geometry of a commercially available PET scanner, the Philips Gemini TF. The coincidence time resolution used in the simulations takes into account the current achievable values as well as expected improvements of both technologies. Several scenarios (including patient data) have been simulated to evaluate the performance of different scanners. Initial results have shown that the low sensitivity of the RPC hampers its application to hadro
Mn valence instability in La2/3Ca1/3MnO3 thin films
A Mn valence instability on La2/3Ca1/3MnO3 thin films, grown on LaAlO3
(001)substrates is observed by x-ray absorption spectroscopy at the Mn L-edge
and O K-edge. As-grown samples, in situ annealed at 800 C in oxygen, exhibit a
Curie temperature well below that of the bulk material. Upon air exposure a
reduction of the saturation magnetization, MS, of the films is detected.
Simultaneously a Mn2+ spectral signature develops, in addition to the expected
Mn3+ and Mn4+ contributions, which increases with time. The similarity of the
spectral results obtained by total electron yield and fluorescence yield
spectroscopy indicates that the location of the Mn valence anomalies is not
confined to a narrow surface region of the film, but can extend throughout the
whole thickness of the sample. High temperature annealing at 1000 C in air,
immediately after growth, improves the magnetic and transport properties of
such films towards the bulk values and the Mn2+ signature in the spectra does
not appear. The Mn valence is then stable even to prolonged air exposure. We
propose a mechanism for the Mn2+ ions formation and discuss the importance of
these observations with respect to previous findings and production of thin
films devices.Comment: Double space, 21 pages, 6 figure
Tunable plasmonic resonance of gallium nanoparticles by thermal oxidation at low temperatures
This Accepted Manuscript is available for reuse under a CC BY-NC-ND 3.0 licence after the 12 month embargo period provided that all the terms of the licence are adhered toThe effect of the oxidation of gallium nanoparticles (Ga NPs) on their plasmonic properties is investigated. Discrete dipole approximation has been used to study the wavelength of the out-of-plane localized surface plasmon resonance in hemispherical Ga NPs, deposited on silicon substrates, with oxide shell (Ga2O3) of different thickness. Thermal oxidation treatments, varying temperature and time, were carried out in order to increase experimentally the Ga2O3 shell thickness in the NPs. The optical, structural and chemical properties of the oxidized NPs have been studied by spectroscopic ellipsometry, scanning electron microscopy, grazing incidence x-ray diffraction and x-ray photoelectron spectroscopy. A clear redshift of the peak wavelength is observed, barely affecting the intensity of the plasmon resonance. A controllable increase of the Ga2O3 thickness as a consequence of the thermal annealing is achieved. In addition, simulations together with ellipsometry results have been used to determine the oxidation rate, whose kinetics is governed by a logarithmic dependence. These results support the tunable properties of the plasmon resonance wavelength in Ga NPs by thermal oxidation at low temperatures without significant reduction of the plasmon resonance intensityThis research is supported by the MINECO (CTQ2014-53334-C2-2-R and MAT2016-80394-R) and Comunidad de Madrid (NANOAVANSENS ref. S2013/MIT-3029) projects. ARC acknowledges Ramón y Cajal program (under contract number RYC-2015-18047).
FN acknowledges support from Marie Sklodowska-Curie grant agreement No 641899 from the European Union’s Horizon 2020 research and innovation programm
Ferromagnetic resonance and magnetooptic study of submicron epitaxial Fe(001) stripes
We present a combined magnetooptic and ferromagnetic resonance study of a series of arrays of single-crystalline Fe stripes fabricated by electron beam lithography on epitaxial Au(001)/Fe(001)/MgO(001) films grown by pulsed laser deposition. The analysis of the films revealed a clear fourfold magnetocrystalline anisotropy, with no significant presence of other anisotropy sources. The use of a large series of arrays, with stripe widths between 140 and 1000 nm and separation between them of either 200 nm or 500 nm, allowed studying their magnetization processes and resonance modes as well as the effects of the dipolar interactions on both. The magnetization processes of the stripes were interpreted in terms of a macrospin approximation, with a good agreement between experiments and calculations and negligible influence of the dipolar interactions. The ferromagnetic resonance spectra evidenced two types of resonances linked to bulk oscillation modes, essentially insensitive to the dipolar interactions, and a third one associated with edge-localized oscillations, whose resonance field is strongly dependent on the dipolar interactions. The ability to produce a high quality, controlled series of stripes provided a good opportunity to achieve an agreement between the experiments and calculations, carried out by taking into account just the Fe intrinsic properties and the morphology of the arrays, thus evidencing the relatively small role of other extrinsic factors
Surface nanopatterning by ion beam irradiation: compositional effects
Surface nanopatterning induced by ion beam irradiation (IBI) has emerged as an effective nanostructuring technique since it induces patterns on large areas of a wide variety of materials, in short time, and at low cost. Nowadays, two main subfields can be distinguished within IBI nanopatterning depending on the irrelevant or relevant role played by the surface composition. In this review, we give an up-dated account of the progress reached when surface composition plays a relevant role, with a main focus on IBI surface patterning with simultaneous co-deposition of foreign atoms. In addition, we also review the advances in IBI of compound surfaces as well as IBI systems where the ion employed is not a noble gas species. In particular, for the IBI with concurrent metal co-deposition, we detail the chronological evolution of these studies because it helps us to clarify some contradictory early reports. We describe the main patterns obtained with this technique as a function of the foreign atom deposition pathway, also focusing in those systematic studies that have contributed to identify the main mechanisms leading to the surface pattern formation and development. Likewise, we explain the main theoretical models aimed at describing these nanopattern formation processes. Finally, we address two main special features of the patterns induced by this technique, namely, the enhanced pattern ordering and the possibility to produce both morphological and chemical patterns.This work was supported by Ministerio de Economía, Industria y Competitividad (MINECO, Spain), Agencia Estatal de Investigación (AEI, Spain), and Fondo Europeo de Desarrollo Regional (FEDER, EU) through Grant No. PGC2018-094763-B-I00, and by Comunidad de Madrid (Spain) under the Multiannual Agreement with UC3M in the line of Excellence of University Professors, No. EPUC3M23, in the context of the V Plan Regional de Investigación Científica e Innovación Tecnológica (PRICIT), as well as under the TRANSNANOAVANSENS program (S2018-NMT-4349)
Dynamic magnetic properties of amorphous Fe80B20 thin films and their relation to interfaces
We present a ferromagnetic resonance study of the dynamic properties of a set of amorphous Fe-B films deposited on Corning Glass® and MgO (001) substrates, either with or without capping. We show that the in plane anisotropy of the MgO grown films contains both uniaxial and biaxial components whereas it is just uniaxial for those grown on glass. The angular dependence of the linewidth strongly differs in terms of symmetry and magnitude depending on the substrate and capping. We discuss the role of the interfaces on the magnetization damping and the generation of the anisotropy. We obtained values of the intrinsic damping parameters comparable to the lowest ones reported for amorphous films of similar compositions
The role of the oxide shell in the chemical functionalization of plasmonic gallium nanoparticles
S. Catalán-Gómez, M. Briones, A. Redondo-Cubero, F. J. Palomares, F. Nucciarelli, E. Lorenzo, J. L. Pau, "The role of the oxide shell in the chemical functionalization of plasmonic gallium nanoparticles", SPIE Optics + Optoelectronics Proc. SPIE 10231 (16 May 2017); doi: 10.1117/12.2265665; Copyright 2017 Society of Photo‑Optical Instrumentation Engineers. One print or electronic copy may be made for personal use only. Systematic reproduction and distribution, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper are prohibited.Plasmonic Ga nanoparticles (NPs) were thermally oxidized at low temperature in order to increase the native Ga 2 O 3 shell thickness and to improve their stability during the chemical functionalization. The optical, structural and chemical properties of the oxidized NPs have been studied by spectroscopic ellipsometry, scanning electron microscopy, grazing incidence X-ray diffraction and X-ray photoelectron spectroscopy. A clear redshift of the peak wavelength is observed with the increasing annealing time due to the Ga 2 O 3 thickness increase, and barely affecting the intensity of the plasmon resonance. This oxide layer enhances the stability of the NPs upon immersion in ethanol or water. The surface sensitivity properties of the as-grown and oxidized NPs were investigated by linking a thiol group from 6-Mercapto-1-hexanol through immersion. Ellipsometric spectra at the reversal polarization handedness (RPH) condition are in agreement with the Langmuir absorption model, indicating the formation of a thiol monolayer on the NPs
- …