A cotunneling mechanism for all-electrical Electron Spin Resonance of single adsorbed atoms

The recent development of all-electrical electron spin resonance (ESR) in a scanning tunneling microscope (STM) setup has opened the door to vast applications. Despite the fast growing number of experimental works on STM-ESR, the fundamental principles remains unclear. By using a cotunneling picture, we show that the spin resonance signal can be explained as a time-dependent variation of the tunnel barrier induced by the alternating electric driving field. We demonstrate how this variation translates into the resonant frequency response of the direct current. Our cotunneling theory explains the main experimental findings. Namely, the linear dependence of the Rabi flop rate with the alternating bias amplitude, the absence of resonant response for spin-unpolarized currents, and the weak dependence on the actual atomic species.Comment: 11 pages, 3 figure

Effect of Glass Fiber Hybridization on the Behavior Under Impact of Woven Carbon Fiber/Epoxy Laminates

The low-velocity impact behavior was studied in hybrid laminates manufactured by RTM with woven carbon and glass (S2) fabrics. Specimens with different thicknesses and glass fiber content (from 0 to 21 vol.%) were tested with impact energies in the range 30–245 J and the resulting deformation and fracture micromechanisms were studied using X-ray microtomography. The results of these analyses, together with those of the impact tests (maximum load and energy absorbed), were used to elucidate the role played by glass fiber hybridization on the fracture micromechanisms and on the overall laminate performance under low-velocity impact

Spalling uniaxial strength of Al2O3 at high strain rates

In this article research into the uniaxial tensile strength of Al2O3 monolithic ceramic is presented. The experimental procedure of the spalling of long bars is investigated from different approaches. This method is used to obtain the tensile strength at high strain rates under uniaxial conditions. Different methodologies proposed by several authors are used to obtain the tensile strength. The hypotheses needed for the experimental set-up are also checked, and the requirements of the set-up and the variables are also studied by means of numerical simulations. The research shows that the shape of the projectile is crucial to achieve successfully tests results. An experimental campaign has been carried out including high speed video and a digital image correlation system to obtain the tensile strength of alumina. Finally, a comparison of the test results provided by three different methods proposed by different authors is presented. The tensile strength obtained from the three such methods on the same specimens provides contrasting results. Mean values vary from one method to another but the trends are similar for two of the methods. The third method gives less scatter, though the mean values obtained are lower and do not follow the same trend as the other methods for the different specimens

Parameterized optimized effective potential for atoms

The optimized effective potential equations for atoms have been solved by parameterizing the potential. The expansion is tailored to fulfill the known asymptotic behavior of the effective potential at both short and long distances. Both single configuration and multi configuration trial wave functions are implemented. Applications to several atomic systems are presented improving previous works. The results here obtained are very close to those calculated in either the Hartree-Fock and the multi configurational Hartree-Fock framework.Comment: 8 pages, 3 figure

Identifying Ultra-Cool Dwarfs at Low Galactic Latitudes: A Southern Candidate Catalogue

We present an Ultra-Cool Dwarf (UCD) catalogue compiled from low southern Galactic latitudes and mid-plane, from a cross-correlation of the 2MASS and SuperCOSMOS surveys. The catalogue contains 246 members identified from 5042 sq. deg. within 220 deg. <= l <= 360 deg. and 0 deg. < l <= 30 deg., for |b| <= 15 deg. Sixteen candidates are spectroscopically confirmed in the near-IR as UCDs with spectral types from M7.5V to L9. Our catalogue selection method is presented enabling UCDs from ~M8V to the L-T transition to be selected down to a 2MASS limiting magnitude of Ks ~= 14.5 mag. This method does not require candidates to have optical detections for catalogue inclusion. An optimal set of optical/near-IR and reduced proper-motion selection criteria have been defined that includes: an Rf and Ivn photometric surface gravity test, a dual Rf-band variability check, and an additional photometric classification scheme to selectively limit contaminants. We identify four candidates as possible companions to nearby Hipparcos stars -- observations are needed to identify these as potential benchmark UCD companions. We also identify twelve UCDs within a possible distance 20 pc, three are previously unknown of which two are estimated within 10 pc, complimenting the nearby volume-limited census of UCDs. An analysis of the catalogue spatial completeness provides estimates for distance completeness over three UCD MJ ranges, while Monte-Carlo simulations provide an estimate of catalogue areal completeness at the 75 per cent level. We estimate a UCD space density of Rho (total) = (6.41+-3.01)x10^3/pc^3 over the range of 10.5 <= MJ ~< 14.9, similar to values measured at higher Galactic latitudes (|b| ~> 10 deg.) in the field population and obtained from more robust spectroscopically confirmed UCD samples.Comment: MNRAS accepted April 2012. Contains 30 figures and 11 tables. Tables 2 and 6 to be published in full and on-line only. The on-line tables can also be obtained by contacting the author

Análisis sobre la influencia de la densidad en la termografía de infrarrojos y el alcance de esta técnica en la detección de defectos internos en la madera

This paper shows the results of a laboratory phase for the determination of the 1limits of infrared thermography in detecting internal defects in wood and, furthermore, it analyses how the density of this material can influence the surface temperature displayed in a thermogram. To this end, experimental work is carried out whereby a series of work and environmental parameters are monitored (such as environmental temperature, relative humidity, distance to target), and the process is systematized by using pieces of different wood species (different densities) and by devising a set of samples for which various possible cases are analysed in terms of size and internal position of the damage. Similarly, using these samples, a study has been conducted on the effect on the thermal image produced by an increase of humidity inside the defect phenomena normally associated with wood decay.En el presente artículo se muestran los resultados obtenidos en una fase de laboratorio al tratar de determinar el alcance de la termografía de infrarrojos en la detección de defectos internos en la madera y, por otro lado, cómo interviene la densidad de este material sobre la temperatura superficial mostrada en un termograma. Para ello se ha desarrollado un trabajo experimental donde se han controlado una serie de parámetros ambientales y de trabajo (temperatura ambiente, humedad relativa, distancia al objetivo…), y se ha sistematizado el proceso utilizando piezas de distintas especies de madera (distintas densidades) y diseñando una serie de probetas donde se han analizado varias casuísticas posibles en cuanto a tamaño y posición interna de los daños. Análogamente, sobre estas probetas se ha estudiado el efecto que produce sobre la imagen termográfica un incremento de humedad interna en el defecto asociada normalmente a los fenómenos de pudrición de la madera

A statistical analysis of electric self-potential time series associated to two 1993 earthquakes in Mexico

Recent studies related with earthquake prediction involve statistical studies of the ground electric self-potential behavior. Published results about the complexity of this kind of processes encourage us to study the statistical behavior of the ground electric self-potential recorded in Guerrero state, Mexico. This region is characterized by high seismicity. The electric self-potential variations were recorded in the Acapulco station directly from the ground. The sampling period was four seconds and the data were stored from March to December of 1993. Two significant earthquakes (EQs) occurred near this station, 15 May and 24 October whose magnitudes were Mw=6.0 and Mw=6.6 respectively. A preliminary processing was carried out consisting of a moving average of the original time series in order to filter the very high frequencies and to complete short lacks of data and outliers. Then, a visual inspection of the complete filtered signal was performed to search some seismic electric signals (SES), which were ambiguously depicted. Subsequently, a detrending of &amp;micro;=0 was applied with the windows of 3.3, 6.6 and 10 h. Later, the analysis of the spectral exponent β was made, showing changes during the total period examined, and the most evident changes occurred during the preparation mechanism of the Mw=6.6 EQ. Fifteen days before the 24 October EQ, a Brownian-noise like behavior was displayed (β&amp;asymp;2), having a duration of about two days. In addition a Higuchi fractal method and wavelet analysis were made confirming the presence of the β-anomaly

Caracterización de morteros con cerámica reciclada y su uso en piezas prefabicadas para entrevigado de forjados

This study analyses a procedure to manufacture mortars with different percentages of ceramic waste as partial replacement for aggregates. The study also examines the physical, chemical and mechanical properties of the new mortars, analysing substitution ratios that range from 10% to 50%. Prior to this, all the materials used in the production of the mortar were characterised using X-ray diffraction (XRD) and fluorescence (XRF). The objective was to determine the similarity between different types of ceramic waste, as well as the differences in the minerology and chemical composition with the aggregate. The results of the study show that it is possible to obtain mortars with lower densities compared to the same product with no recycled content. The product’s characteristics make it ideal for the manufacture of prefabricated components for structural floors for rehabilitation works. Finally, the pieces are used in a real rehabilitation case study, highlightining the structural advantages.Este trabajo analiza morteros con diferentes porcentajes de cerámica reciclada como sustituto parcial de la arena. Además el estudio examina las propiedades físicas, químicas y mecánicas de los nuevos morteros, empleando diferentes porcentajes de sustitución (10% - 50%). Con anterioridad, se caracterizaron todos los materiales empleados en este trabajo mediante difracción y fluorescencia de rayos-X. El objetivo fue determinar las diferencias y similitudes en la composición química y mineralógica de los distintos tipos de residuos cerámicos y del resto de áridos utilizados. Los resultados muestran que es posible obtener morteros con menor densidad frente a las muestras sin contenido reciclado. Sus características los hacen idóneos para la creación de piezas prefabricadas de entrevigado para rehabilitación de forjados. Finalmente. Las piezas se usaron en un caso de estudio real, destacando las ventajas estructurales que conlleva su uso

Análisis sobre la influencia de la densidad en la termografía de infrarrojos y el alcance de esta técnica en la detección de defectos internos en la madera

This paper shows the results of a laboratory phase for the determination of the 1limits of infrared thermography in detecting internal defects in wood and, furthermore, it analyses how the density of this material can influence the surface temperature displayed in a thermogram. To this end, experimental work is carried out whereby a series of work and environmental parameters are monitored (such as environmental temperature, relative humidity, distance to target), and the process is systematized by using pieces of different wood species (different densities) and by devising a set of samples for which various possible cases are analysed in terms of size and internal position of the damage. Similarly, using these samples, a study has been conducted on the effect on the thermal image produced by an increase of humidity inside the defect phenomena normally associated with wood decay.&lt;br&gt;&lt;br&gt;En el presente artículo se muestran los resultados obtenidos en una fase de laboratorio al tratar de determinar el alcance de la termografía de infrarrojos en la detección de defectos internos en la madera y, por otro lado, cómo interviene la densidad de este material sobre la temperatura superficial mostrada en un termograma. Para ello se ha desarrollado un trabajo experimental donde se han controlado una serie de parámetros ambientales y de trabajo (temperatura ambiente, humedad relativa, distancia al objetivo…), y se ha sistematizado el proceso utilizando piezas de distintas especies de madera (distintas densidades) y diseñando una serie de probetas donde se han analizado varias casuísticas posibles en cuanto a tamaño y posición interna de los daños. Análogamente, sobre estas probetas se ha estudiado el efecto que produce sobre la imagen termográfica un incremento de humedad interna en el defecto asociada normalmente a los fenómenos de pudrición de la madera