Early quantum task scheduling

An Early Quantum Task (EQT) is a Quantum EDF task that has shrunk its first period into one quantum time slot. Its purpose is to be executed as soon as possible, without causing deadline overflow of other tasks. We will derive the conditions under which an EQT can be admitted and can have an immediate start. The advantage of scheduling EQTs is shown by its use in a buffered multi-media server. The EQT is associated with a multimedia stream and it will use its first invocation to fill the buffer, such that a client can start receiving data immediately

A Real time network at home

This paper proposes a home network which integrates both real-time and non-real-time capabilities for one coherent, distributed architecture. Such a network is not yet available. Our network will support inexpensive, small appliances as well as more expensive, large appliances. The network is based on a new type of real-time token protocol that uses scheduling to achieve optimal token-routing through the network. Depending on the scheduling algorithm, bandwidth utilisations of 100 percent are possible. Token management, to prevent token-loss or multiple tokens, is essential to support a dynamic, plug-and-play configuration. Small appliances, like sensors, would contain low-cost, embedded processors with limited computing power, which can handle lightweight network protocols. All other operations can be delegated to other appliances that have sufficient resources. This provides a basis for transparency, as it separates controlling and controlled object. Our network will support this. We will show the proposed architecture of such a network and present experiences with and preliminary research of our design

A high frequency optical trap for atoms using Hermite-Gaussian beams

We present an experimental method to create a single high frequency optical trap for atoms based on an elongated Hermite-Gaussian TEM01 mode beam. This trap results in confinement strength similar to that which may be obtained in an optical lattice. We discuss an optical setup to produce the trapping beam and then detail a method to load a Bose-Einstein Condensate (BEC) into a TEM01 trap. Using this method, we have succeeded in producing individual highly confined lower dimensional condensates.Comment: 9 pages, 5 figure

Network Adjustment of Orbit Errors in SAR Interferometry

Orbit errors can induce significant long wavelength error signals in synthetic aperture radar (SAR) interferograms and thus bias estimates of wide-scale deformation phenomena. The presented approach aims for correcting orbit errors in a preprocessing step to deformation analysis by modifying state vectors. Whereas absolute errors in the orbital trajectory are negligible, the influence of relative errors (baseline errors) is parametrised by their parallel and perpendicular component as a linear function of time. As the sensitivity of the interferometric phase is only significant with respect to the perpendicular baseline and the rate of change of the parallel baseline, the algorithm focuses on estimating updates to these two parameters. This is achieved by a least squares approach, where the unwrapped residual interferometric phase is observed and atmospheric contributions are considered to be stochastic with constant mean. To enhance reliability, baseline errors are adjusted in an overdetermined network of interferograms, yielding individual orbit corrections per acquisition

Reliable estimation of orbit errors in spaceborne SAR interferometry. The network approach

An approach to improve orbital state vectors by orbit error estimates derived from residual phase patterns in synthetic aperture radar interferograms is presented. For individual interferograms, an error representation by two parameters is motivated: the baseline error in cross-range and the rate of change of the baseline error in range. For their estimation, two alternatives are proposed: a least squares approach that requires prior unwrapping and a less reliable gridsearch method handling the wrapped phase. In both cases, reliability is enhanced by mutual control of error estimates in an overdetermined network of linearly dependent interferometric combinations of images. Thus, systematic biases, e.g., due to unwrapping errors, can be detected and iteratively eliminated. Regularising the solution by a minimum-norm condition results in quasi-absolute orbit errors that refer to particular images. For the 31 images of a sample ENVISAT dataset, orbit corrections with a mutual consistency on the millimetre level have been inferred from 163 interferograms. The method itself qualifies by reliability and rigorous geometric modelling of the orbital error signal but does not consider interfering large scale deformation effects. However, a separation may be feasible in a combined processing with persistent scatterer approaches or by temporal filtering of the estimates

Discontinuities without discontinuity: The Weakly-enforced Slip Method

Tectonic faults are commonly modelled as Volterra or Somigliana dislocations in an elastic medium. Various solution methods exist for this problem. However, the methods used in practice are often limiting, motivated by reasons of computational efficiency rather than geophysical accuracy. A typical geophysical application involves inverse problems for which many different fault configurations need to be examined, each adding to the computational load. In practice, this precludes conventional finite-element methods, which suffer a large computational overhead on account of geometric changes. This paper presents a new non-conforming finite-element method based on weak imposition of the displacement discontinuity. The weak imposition of the discontinuity enables the application of approximation spaces that are independent of the dislocation geometry, thus enabling optimal reuse of computational components. Such reuse of computational components renders finite-element modeling a viable option for inverse problems in geophysical applications. A detailed analysis of the approximation properties of the new formulation is provided. The analysis is supported by numerical experiments in 2D and 3D.Comment: Submitted for publication in CMAM

Bose Einstein Condensate in a Box

Bose-Einstein condensates have been produced in an optical box trap. This novel optical trap type has strong confinement in two directions comparable to that which is possible in an optical lattice, yet produces individual condensates rather than the thousands typical of a lattice. The box trap is integrated with single atom detection capability, paving the way for studies of quantum atom statistics.Comment: 4 pages, 5 figure

The ultra high resolution XUV spectroheliograph: An attached payload for the Space Station Freedom

The principle goal of the ultra high resolution XUV spectroheliograph (UHRXS) is to improve the ability to identify and understand the fundamental physical processes that shape the structure and dynamics of the solar chromosphere and corona. The ability of the UHRXS imaging telescope and spectrographs to resolve fine scale structures over a broad wavelength (and hence temperature) range is critical to this mission. The scientific objectives and instrumental capabilities of the UHRXS investigation are reviewed before proceeding to a discussion of the expected performance of the UHRXS observatory

Ground reference data for sugarcane biomass estimation in São Paulo state, Brazil

In order to make effective decisions on sustainable development, it is essential for sugarcane-producing countries to take into account sugarcane acreage and sugarcane production dynamics. The availability of sugarcane biophysical data along the growth season is key to an effective mapping of such dynamics, especially to tune agronomic models and to cross-validate indirect satellite measurements. Here, we introduce a dataset comprising 3,500 sugarcane observations collected from October 2014 until October 2015 at four fields in the São Paulo state (Brazil). The campaign included both non-destructive measurements of plant biometrics and destructive biomass weighing procedures. The acquisition plan was designed to maximize cost-effectiveness and minimize field-invasiveness, hence the non-destructive measurements outnumber the destructive ones. To compensate for such imbalance, a method to convert the measured biometrics into biomass estimates, based on the empirical adjustment of allometric models, is proposed. In addition, the paper addresses the precisions associated to the ground measurements and derived metrics. The presented growth dynamics and associated precisions can be adopted when designing new sugarcane measurement campaigns.5FUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULO - FAPESP2013/50942-

Inverting elastic dislocations using the Weakly-enforced Slip Method

Earthquakes cause lasting changes in static equilibrium, resulting in global deformation fields that can be observed. Consequently, deformation measurements such as those provided by satellite based InSAR monitoring can be used to infer an earthquake's faulting mechanism. This inverse problem requires a numerical forward model that is both accurate and fast, as typical inverse procedures require many evaluations. The Weakly-enforced Slip Method (WSM) was developed to meet these needs, but it was not before applied in an inverse problem setting. Consequently, it was unknown what effect particular properties of the WSM, notably its inherent continuity, have on the inversion process. Here we show that the WSM is able to accurately recover slip distributions in a Bayesian-inference setting, provided that data points in the vicinity of the fault are removed. In a representative scenario, an element size of 2 km was found to be sufficiently fine to generate a posterior probability distribution that is close to the theoretical optimum. For rupturing faults a masking zone of 20 km sufficed to avoid numerical disturbances that would otherwise be induced by the discretization error. These results demonstrate that the WSM is a viable forward method for earthquake inversion problems. While our synthesized scenario is basic for reasons of validation, our results are expected to generalize to the wider gamut of scenarios that finite element methods are able to capture. This has the potential to bring modeling flexibility to a field that if often forced to impose model restrictions in a concession to computability.Comment: The associated software implementation is openly available in zenodo at https://doi.org/10.5281/zenodo.507179