Substituted nano-hydroxyapatite toothpastes reduce biofilm formation on enamel and resin-based composite surfaces

Background: Toothpastes containing nano-hydroxyapatite (n-HAp) substituted with metal ions provide calcium and phosphate ions to dental hard tissues, reducing demineralization, and promoting remineralization. Few data are available about the effect of these bioactive compounds on oral microbiota. Methods: This in vitro study evaluated the influence of two commercially-available substituted n-HAp-based toothpastes (\u3b1: Zn-carbonate substituted n-HAp; \u3b2: F, Mg, Sr-carbonate substituted n-HAp) on early colonization (EC, 12 h) and biofilm formation (BF, 24 h) by oral microbiota. Controls were brushed with distilled water. Artificial oral microcosm and Streptococcus mutans biofilms were developed using human enamel and a resin-based composite (RBC) as adherence surfaces. Two test setups, a shaking multiwell plate and a modified drip-flow reactor (MDFR), were used to simulate clinical conditions during the night (low salivary flow and clearance) and daytime, respectively. Energy-dispersive X-ray spectrometry (EDS) was used to evaluate specimens\u2019 surfaces after toothpaste treatment. Fluoride release from \u3b2 toothpaste was evaluated. Viable adherent biomass was quantified by MTT assay, and biofilms\u2019 morphology was highlighted using confocal microscopy. Results: EDS showed the presence of remnants from the tested toothpastes on both adherence surfaces. \u3b2 toothpaste showed significantly lower EC and BF compared to control using the artificial oral microcosm model, while \u3b1 toothpaste showed lower EC and BF compared to control, but higher EC and BF compared to \u3b2 toothpaste. The effect shown by \u3b2 toothpaste was, to a minimal extent, due to fluoride release. Interestingly, this result was seen on both adherence surfaces, meaning that the tested toothpastes significantly influenced EC and BF even on RBC surfaces. Furthermore, the effect of toothpaste treatments was higher after 12 h than 24 h, suggesting that toothbrushing twice a day is more effective than brushing once. Conclusions: The efficacy of these treatments in reducing microbial colonization of RBC surfaces may represent a promising possibility in the prevention of secondary caries

Larval dispersal of Spodoptera frugiperda strains on Bt Cotton: a model for understanding resistance evolution and consequences for its management.

High dispersal of Lepidoptera larvae between non-Bt and Bt cotton plants can favour the evolution of insect resistance; however, information on host acceptance of neonates in tropical transgenic crops is scarce. Therefore, the purposes of this study were as follows: (i) to investigate the feeding behaviour of susceptible and Cry1F-resistant strains of Spodoptera frugiperda (J.E. Smith) on Bt and non-Bt cotton (Gossypium hirsutum L.) varieties and (ii) to understand the possible effects of cotton field contamination on the dispersal and infestation capacity of S. frugiperda larvae by using an individualbased model. The main results of this paper are as follows: (1) the highest post-feeding larval dispersal of the Cry1F-resistant strain occurred at an exposure time of 18?24 h; (2) via video tracking assays, we found that the least distance moved was by larvae resistant to Cry1F on non-Bt cotton; and (3) the model indicated differences in mobility capacity between Bt and non-Bt cotton. We conclude that resistant neonates exhibit sedentary behaviour. Our report represents the first findings concerning the fitness cost of larval behaviour traits of S. frugiperda associated with Cry1F resistance in Brazilian populations.Publicado online em 23 de novembro de 2017

Population dynamics of Aphis gossypii Glover and Aphis craccivora Koch (Hemiptera: Heteroptera: Aphididae) in sole and intercropping systems of cotton and cowpea.

Population dynamics of aphids have been studied in sole and intercropping systems. These studies have required the use of more precise analytical tools in order to better understand patterns in quantitative data. Mathematical models are among the most important tools to explain the dynamics of insect populations. This study investigated the population dynamics of aphids Aphis gossypii and Aphis craccivora over time, using mathematical models composed of a set of differential equations as a helpful analytical tool to understand the population dynamics of aphids in arrangements of cotton and cowpea. The treatments were sole cotton, sole cowpea, and three arrangements of cotton intercropped with cowpea (t1, t2 and t3). The plants were infested with two aphid species and were evaluated at 7, 14, 28, 35, 42, and 49 days after the infestations. Mathematical models were used to fit the population dynamics of two aphid species. There were good fits for aphid dynamics by mathematical model over time. The highest population peak of both species A. gossypii and A. craccivora was found in the sole crops, and the lowest population peak was found in crop system t2. These results are important for integrated management programs of aphids in cotton and cowpea

Identifiability of Control-Oriented Glucose-Insulin Linear Models: Review and Analysis

One of the main challenges of glucose control in patients with type 1 diabetes is identifying a control-oriented model that reliably predicts the behavior of glycemia. Here, a review is provided emphasizing the structural identifiability and observability properties, which surprisingly reveals that few of them are globally identifiable and observable at the same time. Thus, a general proposal was developed to encompass four linear models according to suitable assumptions and transformations. After the corresponding structural properties analysis, two minimal model structures are generated, which are globally identifiable and observable. Then, the practical identifiability is analyzed for this application showing that the standard collected data in many cases do not have the necessary quality to ensure a unique solution in the identification process even when a considerable amount of data is collected. The two minimal control-oriented models were identified using a standard identification procedure using data from 30 virtual patients of the UVA/Padova simulator and 77 diabetes care data from adult patients of a diabetes center. The identification was performed in two stages: calibration and validation. In the first stage, the average length was taken as two days (dictated by the practical identifiability). For both structures, the mean absolute error was 16.8 mg/dl and 9.9 mg/dl for virtual patients and 21.6 mg/dl and 21.5 mg/dl for real patients. For the second stage, a one-day validation window was considered long enough for future artificial pancreas applications. The mean absolute error was 23.9 mg/dl and 12.3 mg/dl for virtual patients and 39.2 mg/dl and 36.6 mg/dl for virtual and real patients. These results confirm that linear models can be used as prediction models in model-based control strategies as predictive control.Fil: Hoyos, J. D.. Universidad Nacional de Colombia. Sede Medellín; ColombiaFil: Villa Tamayo, M. F.. Universidad Nacional de Colombia. Sede Medellín; ColombiaFil: Builes Montano, C. E.. Universidad de Antioquia; ColombiaFil: Ramirez Rincon, A.. Universidad Pontificia Bolivariana; ColombiaFil: Godoy, José Luis. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto de Desarrollo Tecnológico para la Industria Química. Universidad Nacional del Litoral. Instituto de Desarrollo Tecnológico para la Industria Química; ArgentinaFil: Garcia Tirado, J.. University of Virginia; Estados UnidosFil: Rivadeneira Paz, Pablo Santiago. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto de Desarrollo Tecnológico para la Industria Química. Universidad Nacional del Litoral. Instituto de Desarrollo Tecnológico para la Industria Química; Argentin

Trace elements and isotopes analyses on historical samples of white sharks from the Mediterranean Sea

The white shark Carcharodon carcharias has been present in the Mediterranean Sea since 3.2 million years ago. Nevertheless, the current population shows a low genetic variability suggesting an endangered small population, on which there is scarce information regarding ecotoxicology or trophic ecology. Given that white shark's sightings are rare in the Mediterranean and the possibility of obtaining samples is highly limited, the aim of this research was to provide general information regarding the concentration of trace elements and stable isotopes (delta N-15 and delta C-13). Laboratory analyses were performed on 18 and 12 subsamples from two different white sharks' vertebrae obtained from two adult specimens caught in 1987, in Favignana Island, Italy. Perforations were made along the vertebrae to describe both trace elements and stable isotopes at different life stages. A total of 38 trace elements were analysed, in which the highest concentrations were found in Fe, Sr, U, Pb, and Zn. The fluctuations of these elements during the ontogeny of both individuals could have been related to changes in diet and environment, although the specific origin remains unknown. Regarding stable isotopes, the vertebrae from the male showed an isotopic range from 9.6 parts per thousand to 10.8 parts per thousand (delta N-15) and from -16.5 parts per thousand to -13.0 parts per thousand (delta C-13) with a mean +/- SD value of 10.3 +/- 0.4 parts per thousand for delta N-15 and -14.6 +/- 1.3 parts per thousand for delta C-13; whereas the female vertebrae had an isotopic range from 9.8 parts per thousand to 11.1 parts per thousand (delta N-15) and from -16.9 parts per thousand to -15.0 parts per thousand (delta C-13), with a mean +/- SD value of 10.8 +/- 0.6 parts per thousand for delta N-15 and -15.8 +/- 0.8 parts per thousand for delta C-13. There were no significant delta N-15 differences (U = 6, p = 0.07346) between the two individuals. However, there were just significant differences in delta C-13 (t = -1.8, p = 0.049256), which could suggest sexual segregation in terms of habitat use and feeding habits

Loading stress distribution in posterior teeth restored by different core materials under fixed zirconia partial denture: A 3d-fea study

Purpose: To evaluate the effect of different substrate stiffness [sound dentin (SD), resin composite core (RC) or metal core (MC)] on the stress distribution of a zirconia posterior three-unit fixed partial denture (FPD). Methods: The abutment teeth (first molar and first premolar) were modeled, containing 1.5 mm of axial reduction, and converging axial walls. A static structural analysis was performed using a finite element method and the maximum principal stress criterion to analyze the fixed partial denture (FPD) and the cement layers of both abutment teeth. The materials were considered isotropic, linear, elastic, homogeneous and with bonded contacts. An axial load (300 N) was applied to the occlusal surface of the second premolar. Results: The region of the prosthetic connectors showed the highest tensile stress magnitude in the FPD structure depending on the substrate stiffness with different core materials. The highest stress peak was observed with the use of MC (116.4 MPa) compared to RC and SD. For the cement layer, RC showed the highest values in the molar abutment (14.7 MPa) and the highest values for the premolar abutment (14.4 MPa) compared to SD (14.1 and 13.4 MPa) and MC (13.8 and 13.3 MPa). Both metal core and resin composite core produced adequate stress concentration in the zirconia fixed partial denture during the load incidence. However, more flexible substrates, such as composite cores, can increase the tensile stress magnitude on the cement

The Perceived Benefits of Height: Strength, Dominance, Social Concern, and Knowledge among Bolivian Native Amazonians

Research in industrial countries suggests that, with no other knowledge about a person, positive traits are attributed to taller people and correspondingly, that taller people have slightly better socioeconomic status (SES). However, research in some non-industrialized contexts has shown no correlation or even negative correlations between height and socioeconomic outcomes. It remains unclear whether positive traits remain attributed to taller people in such contexts. To address this question, here we report the results of a study in a foraging-farming society of native Amazonians in Bolivia (Tsimane’)–a group in which we have previously shown little association between height and socioeconomic outcomes. We showed 24 photographs of pairs of Tsimane’ women, men, boys, and girls to 40 women and 40 men >16 years of age. We presented four behavioral scenarios to each participant and asked them to point to the person in the photograph with greater strength, dominance, social concern, or knowledge. The pairs in the photographs were of the same sex and age, but one person was shorter. Tsimane’ women and men attributed greater strength, dominance, and knowledge to taller girls and boys, but they did not attribute most positive traits to taller adults, except for strength, and more social concern only when women assessed other women in the photographs. These results raise a puzzle: why would Tsimane’ attribute positive traits to tall children, but not tall adults? We propose three potential explanations: adults’ expectations about the more market integrated society in which their children will grow up, height as a signal of good child health, and children’s greater variation in the traits assessed corresponding to maturational stages