HEAT TRANSFER ENHANCEMENT FROM A WIRE TO AN IMPINGING UPWARD SUBMERGED SLOT JET OF WATER IN SUBCOOLED AND SATURATED BOILING CONDITIONS

Experimental data about the heat transfer from a heated 0.25 mm in diameter nickel wire to a submerged upward flow slot jet of distilled water are reported. The tests are carried on in forced convection regime, in sub-cooled and saturated boiling conditions. The influence on the heat transfer rate of different parameters is investigated, such as the jet exit velocity, the distance between the slot exit and the wire and the heat transfer regime, in particular the sub-cooling degree. The choice of the nickel is due to the opportunity to operate in a wide range of the jet exit velocity, thanks to its mechanical and thermometric characteristics. The main aim of this research was to find out the optimal conditions, in order to maximize the heat transfer coefficient enhancement, and moreover, to make a comparison between other results obtained in the 1990s by the same authors on horizontal circular cylinders, with the diameter one size order bigger than the present wire

Light Ion Accelerating Line (L3IA): Test Experiment at ILIL-PW

The construction of a novel Laser driven Light Ions Acceleration Line(L3IA) is progressing rapidly towards the operation, following the recent upgrade of the ILIL-PW laser facility. The Line was designed following the pilot experimental activity carried out earlier at the same facility to define design parameters and to identify main components including target control and diagnostic equipment, also in combination with the numerical simulations for the optimization of laser and target parameters. A preliminary set of data was acquired following the successful commissioning of the laser system >100 TW upgrade. Data include output from a range of different ion detectors and optical diagnostics installed for qualification of the laser-target interaction. An overview of the results is given along with a description of the relevant upgraded laser facility and features.Comment: 6 pages, 7 figures, 18 references, presented at the EAAC 201

Overview and specifications of laser and target areas at the Intense Laser Irradiation Laboratory

Abstract We present the main features of the ultrashort, high-intensity laser installation at the Intense Laser Irradiation Laboratory (ILIL) including laser, beam transport and target area specifications. The laboratory was designed to host laser–target interaction experiments of more than 220 TW peak power, in flexible focusing configurations, with ultrarelativistic intensity on the target. Specifications have been established via dedicated optical diagnostic assemblies and commissioning interaction experiments. In this paper we give a summary of laser specifications available to users, including spatial, spectral and temporal contrast features. The layout of the experimental target areas is presented, with attention to the available configurations of laser focusing geometries and diagnostics. Finally, we discuss radiation protection measures and mechanical stability of the laser focal spot on the target

Evidence of resonant surface wave excitation in the relativistic regime through measurements of proton acceleration from grating targets

The interaction of laser pulses with thin grating targets, having a periodic groove at the irradiated surface, has been experimentally investigated. Ultrahigh contrast ($\sim 10^{12}$) pulses allowed to demonstrate an enhanced laser-target coupling for the first time in the relativistic regime of ultra-high intensity >10^{19} \mbox{W/cm}^{2}. A maximum increase by a factor of 2.5 of the cut-off energy of protons produced by Target Normal Sheath Acceleration has been observed with respect to plane targets, around the incidence angle expected for resonant excitation of surface waves. A significant enhancement is also observed for small angles of incidence, out of resonance.Comment: 5 pages, 5 figures, 2nd version implements final correction

Time evolution of stimulated Raman scattering and two-plasmon decay at laser intensities relevant for shock ignition in a hot plasma

Laser–plasma interaction (LPI) at intensities 1015–1016 W cm2 is dominated by parametric instabilities which can be responsible for a significant amount of non-collisional absorption and generate large fluxes of high-energy nonthermal electrons. Such a regime is of paramount importance for inertial confinement fusion (ICF) and in particular for the shock ignition scheme. In this paper we report on an experiment carried out at the Prague Asterix Laser System (PALS) facility to investigate the extent and time history of stimulated Raman scattering (SRS) and two-plasmon decay (TPD) instabilities, driven by the interaction of an infrared laser pulse at an intensity 1:2 1016 W cm2 with a 100 mm scalelength plasma produced from irradiation of a flat plastic target. The laser pulse duration (300 ps) and the high value of plasma temperature (4 keV) expected from hydrodynamic simulations make these results interesting for a deeper understanding of LPI in shock ignition conditions. Experimental results show that absolute TPD/SRS, driven at a quarter of the critical density, and convective SRS, driven at lower plasma densities, are well separated in time, with absolute instabilities driven at early times of interaction and convective backward SRS emerging at the laser peak and persisting all over the tail of the pulse. Side-scattering SRS, driven at low plasma densities, is also clearly observed. Experimental results are compared to fully kinetic large-scale, two-dimensional simulations. Particle-in-cell results, beyond reproducing the framework delineated by the experimental measurements, reveal the importance of filamentation instability in ruling the onset of SRS and stimulated Brillouin scattering instabilities and confirm the crucial role of collisionless absorption in the LPI energy balance

Test of candidate light distributors for the muon (g−-2) laser calibration system

The new muon (g-2) experiment E989 at Fermilab will be equipped with a laser calibration system for all the 1296 channels of the calorimeters. An integrating sphere and an alternative system based on an engineered diffuser have been considered as possible light distributors for the experiment. We present here a detailed comparison of the two based on temporal response, spatial uniformity, transmittance and time stability.Comment: accepted to Nucl.Instrum.Meth.

Study of shock waves generation, hot electron production and role of parametric instabilities in an intensity regime relevant for the shock ignition

We present experimental results at intensities relevant to Shock Ignition obtained at the sub-ns Prague Asterix Laser System in 2012 . We studied shock waves produced by laser-matter interaction in presence of a pre-plasma. We used a first beam at 1ω (1315 nm) at 7 × 10 13 W/cm 2 to create a pre-plasma on the front side of the target and a second at 3ω (438 nm) at ∼ 10 16 W/cm 2 to create the shock wave. Multilayer targets composed of 25 (or 40 μm) of plastic (doped with Cl), 5 μm of Cu (for Kα diagnostics) and 20 μm of Al for shock measurement were used. We used X-ray spectroscopy of Cl to evaluate the plasma temperature, Kα imaging and spectroscopy to evaluate spatial and spectral properties of the fast electrons and a streak camera for shock breakout measurements. Parametric instabilities (Stimulated Raman Scattering, Stimulated Brillouin Scattering and Two Plasmon Decay) were studied by collecting the back scattered light and analysing its spectrum. Back scattered energy was measured with calorimeters. To evaluate the maximum pressure reached in our experiment we performed hydro simulations with CHIC and DUED codes. The maximum shock pressure generated in our experiment at the front side of the target during laser-interaction is 90 Mbar. The conversion efficiency into hot electrons was estimated to be of the order of ∼ 0.1% and their mean energy in the order ∼50 keV. Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distributio

Growth and cycles of the Italian economy since 1861: the new evidence

Based on a newly-available large set of historical national accounts, the paper revisits the main features of economic growth and cycles in Italy for the post-Unification period 1861-2011. Alongside the structural changes in growth dynamics, the main sources of output and productivity growth are identified. As regards the analysis of the underlying cyclical component, a business cycle chronology is first established and then both the specific patterns of individual cycles and the co-movements of output with key macroeconomic variables are investigated. In the 150 years since its political Unification, Italy's economic growth was mainly propelled by consumption and investments, whereas on the supply side the industry and services sectors were by far the main contributors, also because of the positive effect of labour reallocation to nonfarm activities. Over the same period, Italy experienced approximately 20 business cycles of varying duration and amplitude. Output fluctuations were dominated by the short-term variability of agricultural production before World War II and by fluctuations of the industry sector thereafter. The cyclical behaviour exhibited by aggregate demand components conforms quite well to that evidenced in the standard international business cycle literature, although some exceptions arise in the pre-World War II years