We present experimental results at intensities relevant to Shock Ignition
obtained at the sub-ns Prague Asterix Laser System in 2012 . We studied shock waves
produced by laser-matter interaction in presence of a pre-plasma. We used a first beam at
1ω (1315 nm) at 7 × 10 13 W/cm 2 to create a pre-plasma on the front side of the target and
a second at 3ω (438 nm) at ∼ 10 16 W/cm 2 to create the shock wave. Multilayer targets
composed of 25 (or 40 μm) of plastic (doped with Cl), 5 μm of Cu (for Kα diagnostics)
and 20 μm of Al for shock measurement were used. We used X-ray spectroscopy of Cl
to evaluate the plasma temperature, Kα imaging and spectroscopy to evaluate spatial and
spectral properties of the fast electrons and a streak camera for shock breakout measurements.
Parametric instabilities (Stimulated Raman Scattering, Stimulated Brillouin Scattering and
Two Plasmon Decay) were studied by collecting the back scattered light and analysing its
spectrum. Back scattered energy was measured with calorimeters. To evaluate the maximum
pressure reached in our experiment we performed hydro simulations with CHIC and DUED
codes. The maximum shock pressure generated in our experiment at the front side of the
target during laser-interaction is 90 Mbar. The conversion efficiency into hot electrons was
estimated to be of the order of ∼ 0.1% and their mean energy in the order ∼50 keV.
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distributio
