Impact loading of a space nuclear powerplant

Preferred formulation of the problem in two space dimensions are described for solving the threefundamental equations of mechanics (conservation of mass, conservation of momentum, and conservation ofenergy). Models of the behavior of materials provide the closure to the three fundamentals equations forapplications to problems in compressible fluid flow and solid mechanics. Models of fracture and damage aredescribed. A caloric model of the equation of state is proposed to describe thermodynamic properties of solidmaterials with the phase transitions. Two-dimensional problems of a high-velocity impact of a space nuclearpropulsion system reactor are solved. High-velocity impact problems of destruction of reactor are solved for thetwo cases:1) at its crash landing on the Earth surface (the impact velocity being up to 400 m/s);2) at its impact (with velocity up to 16 km/s) with the space debris fragments

Study of the conditions of fracture at explosive compaction of powders

Joint theoretical and experimental investigations have allowed to realize an approach with use of mathematical and physical modeling of processes of a shock wave loading of powder materials.In order to gain a better insight into the effect of loading conditions and, in particular, to study the effect of detonation velocity, explosive thickness, and explosion pressure on the properties of the final sample, we numerically solved the problem about powder compaction in the axisymmetric case.The performed analysis shows that an increase in the decay time of the pressure applied to the sample due to an increase of the explosive thickness or the external loading causes no shrinkage of the destructed region at a fixed propagation velocity of the detonation wave. Simultaneously, a decrease in the propagation velocity of the detonation wave results in an appreciable shrinkage of this region

Моделирование процессов группового удара по гетерогенной преграде конечной толщины

Numerical simulation of the processes of high-speed loading of homogeneous and heteroge- neous targets by single projectiles, as well as by a group of projectiles with the same parameters in mass and momentum, has been carried out. Based on a comparison of the numerical simulation results for loading targets with different sets of projectiles, it is found that a projectile in the form of a ring knocks out the maximum hole in the target in terms of geometric dimensions, while a set of seven small disks removes the maximum mass from the target. The ring impact forms a continuous spall plate, which outruns the cloud of fragments of the destroyed material. Adding more than 5% of ceramics to the aluminum target volume does not allow the projectiles to penetrate throughПроведено численное моделирование процессов высокоскоростного нагружения гомогенных и гетерогенных мишеней одиночными ударниками, а также группой ударников с теми же параметрами по массе и импульсу. На основе сравнения результатов численного моделирования процессов нагружения мишеней разными наборами ударников обнаружено, что ударник в виде кольца выбивает в мишени максимальное отверстие по геометрическим размерам, тогда как набор из семи малых дисков удаляет из мишени максимальную массу, удар кольцом формирует сплошную откольную тарелочку, которая опережает в своем движении облако фрагментов разрушенного материала, внесение в алюминиевую мишень керамики более 5 % по объему не позволяет ударникам сквозного пробити

Mimetic spectral element method for anisotropic diffusion

This paper addresses the topological structure of steady, anisotropic, inhomogeneous diffusion problems. Two discrete formulations: a) mixed and b) direct formulations are discussed. Differential operators are represented by sparse incidence matrices, while weighted mass matrices play the role of metric-dependent Hodge matrices. The resulting mixed formulations are point-wise divergence-free if the right hand side function f = 0. The method is inf-sup stable and displays optimal convergence on orthogonal and non-affine grids.Comment: 43 page

Genome sequences of the human body louse and its primary endosymbiont provide insights into the permanent parasitic lifestyle

As an obligatory parasite of humans, the body louse (Pediculus humanus humanus) is an important vector for human diseases, including epidemic typhus, relapsing fever, and trench fever. Here, we present genome sequences of the body louse and its primary bacterial endosymbiont Candidatus Riesia pediculicola. The body louse has the smallest known insect genome, spanning 108 Mb. Despite its status as an obligate parasite, it retains a remarkably complete basal insect repertoire of 10,773 protein-coding genes and 57 microRNAs. Representing hemimetabolous insects, the genome of the body louse thus provides a reference for studies of holometabolous insects. Compared with other insect genomes, the body louse genome contains significantly fewer genes associated with environmental sensing and response, including odorant and gustatory receptors and detoxifying enzymes. The unique architecture of the 18 minicircular mitochondrial chromosomes of the body louse may be linked to the loss of the gene encoding the mitochondrial single-stranded DNA binding protein. The genome of the obligatory louse endosymbiont Candidatus Riesia pediculicola encodes less than 600 genes on a short, linear chromosome and a circular plasmid. The plasmid harbors a unique arrangement of genes required for the synthesis of pantothenate, an essential vitamin deficient in the louse diet. The human body louse, its primary endosymbiont, and the bacterial pathogens that it vectors all possess genomes reduced in size compared with their free-living close relatives. Thus, the body louse genome project offers unique information and tools to use in advancing understanding of coevolution among vectors, symbionts, and pathogens

LUMINEU: a search for neutrinoless double beta decay based on ZnMoO 4 scintillating bolometers

The LUMINEU is designed to investigate the possibility to search for neutrinoless double beta decay in 100Mo by means of a large array of scintillating bolometers based on ZnMoO4 crystals enriched in 100Mo. High energy resolution and relatively fast detectors, which are able to measure both the light and the heat generated upon the interaction of a particle in a crystal, are very promising for the recognition and rejection of background events. We present the LUMINEU concepts and the experimental results achieved aboveground and underground with large-mass natural and enriched crystals. The measured energy resolution, the α/β discrimination power and the radioactive internal contamination are all within the specifications for the projected final LUMINEU sensitivity. Simulations and preliminary results confirm that the LUMINEU technology can reach zero background in the region of interest (around 3 MeV) with exposures of the order of hundreds kgXyears, setting the bases for a next generation 0v2β decay experiment capable to explore the inverted hierarchy region of the neutrino mass pattern

EXCESS workshop: Descriptions of rising low-energy spectra

International audienceMany low-threshold experiments observe sharply rising event rates of yet unknown origins below a few hundred eV, and larger than expected from known backgrounds. Due to the significant impact of this excess on the dark matter or neutrino sensitivity of these experiments, a collective effort has been started to share the knowledge about the individual observations. For this, the EXCESS Workshop was initiated. In its first iteration in June 2021, ten rare event search collaborations contributed to this initiative via talks and discussions. The contributing collaborations were CONNIE, CRESST, DAMIC, EDELWEISS, MINER, NEWS-G, NUCLEUS, RICOCHET, SENSEI and SuperCDMS. They presented data about their observed energy spectra and known backgrounds together with details about the respective measurements. In this paper, we summarize the presented information and give a comprehensive overview of the similarities and differences between the distinct measurements. The provided data is furthermore publicly available on the workshop’s data repository together with a plotting tool for visualization

Midrapidity antiproton-to-proton ratio in pp collisons root s=0.9 and 7 TeV measured by the ALICE experiment

The ratio of the yields of antiprotons to protons in pp collisions has been measured by the ALICE experiment at root s = 0.9 and 7 TeV during the initial running periods of the Large Hadron Collider. The measurement covers the transverse momentum interval 0.45 < p(t) < 1.05 GeV/c and rapidity vertical bar y vertical bar < 0.5. The ratio is measured to be R-vertical bar y vertical bar<0.5 = 0.957 +/- 0.006(stat) +/- 0.0014(syst) at 0.9 Tev and R-vertical bar y vertical bar<0.5 = 0.991 +/- 0.005 +/- 0.014(syst) at 7 TeV and it is independent of both rapidity and transverse momentum. The results are consistent with the conventional model of baryon-number transport and set stringent limits on any additional contributions to baryon-number transfer over very large rapidity intervals in pp collisions

Transverse momentum spectra of charged particles in proton–proton collisions at √s=900 GeV with ALICE at the LHC

The inclusive charged particle transverse momentum distribution is measured in proton–proton collisions at s=900 GeV at the LHC using the ALICE detector. The measurement is performed in the central pseudorapidity region (|η|<0.8) over the transverse momentum range 0.15<pT<10 GeV/c. The correlation between transverse momentum and particle multiplicity is also studied. Results are presented for inelastic (INEL) and non-single-diffractive (NSD) events. The average transverse momentum for |η|<0.8 is 〈pT〉INEL=0.483±0.001 (stat.)±0.007 (syst.) GeV/c and 〈pT〉NSD=0.489±0.001 (stat.)±0.007 (syst.) GeV/c, respectively. The data exhibit a slightly larger 〈pT〉 than measurements in wider pseudorapidity intervals. The results are compared to simulations with the Monte Carlo event generators PYTHIA and PHOJET