A benzoxazine/substituted borazine composite coating: A new resin for improving the corrosion resistance of the pristine benzoxazine coating applied on aluminum

In this paper, laboratory synthesized Phenol-paraPhenyleneDiAmine (P-pPDA) benzoxazine containing different amounts of B-trimesityl-N-triphenylborazine was applied by spin coating on aluminum and thermally cured. The addition of the borazine derivative (borazine 1) does not appear to modify the curing characteristics of the P-pPDA matrix itself as shown by FTIR, DSC and DEA analyses; however, some interactions - chemical and/or physical (co-crystallization) – between P-pPDA and borazine 1 cannot be excluded. The microstructure of the composites is characterized by a two phase system consisting of a dispersion of nanosized (10–20 nm) clusters for the lowest borazine 1 concentration (0.5 wt%), evolving towards bigger (100–200 nm), agglomerated clusters for higher borazine 1 concentrations (3 wt%) and finally, continuous, dendritic structures within the P-pPDA matrix for the highest borazine 1 concentration (10 wt%). The benzoxazine composite coating containing 0.5 wt% trimesitylborazine derivative showed a largely increased and durable ability to protect the aluminum substrate. It is shown that a highly capacitive behavior and durable barrier properties can be obtained for P-pPDA coatings containing such a low amount of borazine derivative homogeneously dispersed in the benzoxazine matrix. For concentrations of 3 wt%, as agglomeration took place and dendrites appeared for the highest concentration of borazine derivative (10 wt%), the corrosion resistance decreased with time

Receptor Tyrosine Kinases Activate Canonical WNT/β-Catenin Signaling via MAP Kinase/LRP6 Pathway and Direct β-Catenin Phosphorylation

Receptor tyrosine kinase signaling cooperates with WNT/β-catenin signaling in regulating many biological processes, but the mechanisms of their interaction remain poorly defined. We describe a potent activation of WNT/β-catenin by FGFR2, FGFR3, EGFR and TRKA kinases, which is independent of the PI3K/AKT pathway. Instead, this phenotype depends on ERK MAP kinase-mediated phosphorylation of WNT co-receptor LRP6 at Ser1490 and Thr1572 during its Golgi network-based maturation process. This phosphorylation dramatically increases the cellular response to WNT. Moreover, FGFR2, FGFR3, EGFR and TRKA directly phosphorylate β-catenin at Tyr142, which is known to increase cytoplasmic β-catenin concentration via release of β-catenin from membranous cadherin complexes. We conclude that signaling via ERK/LRP6 pathway and direct β-catenin phosphorylation at Tyr142 represent two mechanisms used by various receptor tyrosine kinase systems to activate canonical WNT signaling

Calcium Influx Rescues Adenylate Cyclase-Hemolysin from Rapid Cell Membrane Removal and Enables Phagocyte Permeabilization by Toxin Pores

Bordetella adenylate cyclase toxin-hemolysin (CyaA) penetrates the cytoplasmic membrane of phagocytes and employs two distinct conformers to exert its multiple activities. One conformer forms cation-selective pores that permeabilize phagocyte membrane for efflux of cytosolic potassium. The other conformer conducts extracellular calcium ions across cytoplasmic membrane of cells, relocates into lipid rafts, translocates the adenylate cyclase enzyme (AC) domain into cells and converts cytosolic ATP to cAMP. We show that the calcium-conducting activity of CyaA controls the path and kinetics of endocytic removal of toxin pores from phagocyte membrane. The enzymatically inactive but calcium-conducting CyaA-AC− toxoid was endocytosed via a clathrin-dependent pathway. In contrast, a doubly mutated (E570K+E581P) toxoid, unable to conduct Ca2+ into cells, was rapidly internalized by membrane macropinocytosis, unless rescued by Ca2+ influx promoted in trans by ionomycin or intact toxoid. Moreover, a fully pore-forming CyaA-ΔAC hemolysin failed to permeabilize phagocytes, unless endocytic removal of its pores from cell membrane was decelerated through Ca2+ influx promoted by molecules locked in a Ca2+-conducting conformation by the 3D1 antibody. Inhibition of endocytosis also enabled the native B. pertussis-produced CyaA to induce lysis of J774A.1 macrophages at concentrations starting from 100 ng/ml. Hence, by mediating calcium influx into cells, the translocating conformer of CyaA controls the removal of bystander toxin pores from phagocyte membrane. This triggers a positive feedback loop of exacerbated cell permeabilization, where the efflux of cellular potassium yields further decreased toxin pore removal from cell membrane and this further enhances cell permeabilization and potassium efflux

Molecular understanding of the suppression of new-particle formation by isoprene

Nucleation of atmospheric vapours produces more than half of global cloud condensation nuclei and so has an important influence on climate. Recent studies show that monoterpene (C10H16) oxidation yields highly oxygenated products that can nucleate with or without sulfuric acid. Monoterpenes are emitted mainly by trees, frequently together with isoprene (C5H8), which has the highest global emission of all organic vapours. Previous studies have shown that isoprene suppresses new-particle formation from monoterpenes, but the cause of this suppression is under debate. Here, in experiments performed under atmospheric conditions in the CERN CLOUD chamber, we show that isoprene reduces the yield of highly oxygenated dimers with 19 or 20 carbon atoms - which drive particle nucleation and early growth - while increasing the production of dimers with 14 or 15 carbon atoms. The dimers (termed C-20 and C-15, respectively) are produced by termination reactions between pairs of peroxy radicals (RO2 center dot) arising from monoterpenes or isoprene. Compared with pure monoterpene conditions, isoprene reduces nucleation rates at 1.7 nm (depending on the isoprene = monoterpene ratio) and approximately halves particle growth rates between 1.3 and 3.2 nm. However, above 3.2 nm, C-15 dimers contribute to secondary organic aerosol, and the growth rates are unaffected by isoprene. We further show that increased hydroxyl radical (OH center dot) reduces particle formation in our chemical system rather than enhances it as previously proposed, since it increases isoprene-derived RO2 center dot radicals that reduce C-20 formation. RO2 center dot termination emerges as the critical step that determines the highly oxygenated organic molecule (HOM) distribution and the corresponding nucleation capability. Species that reduce the C-20 yield, such as NO, HO2 and as we show isoprene, can thus effectively reduce biogenic nucleation and early growth. Therefore the formation rate of organic aerosol in a particular region of the atmosphere under study will vary according to the precise ambient conditions.Peer reviewe

Polymer-matrix nanocomposites bombarded by large AR clusters and low energy Cs ions: Sputtering and topography development

In secondary ion mass spectrometry, hybrid materials such as organic matrices loaded with inorganic nanoparticles (NPs) are notoriously difficult to depth profile with any known ion beam, including large Ar clusters, although they display excellent performance with pure organic materials and polymers. To improve their understanding of the detrimental effects of the hybrid material nature on depth profiling, a precise evaluation of the sputtering and roughness induced upon Cs ion and Ar cluster beam bombardment of a series of composite samples was performed. For this purpose, the authors focused on the sputtering of a selection of extruded, hot-pressed polymer-matrix nanocomposite films by large Ar clusters (20keV Ar1000þ–20eV/at and 10keV Ar3000þ–3.3eV/at) and low energy (500eV) Csþ ions. The selected sample coatings were pure polycarbonate (PC; reference), PC with 5wt. % graphene nanoplatelets, PC with 5wt. % Fe3O4 magnetic nanoparticles (MNPs), and PC with 10wt. % graphene oxide decorated with similar MNPs. The original surfaces and crater bottoms obtained after a fixed ion dose were carefully analyzed by stylus profilometry and atomic force microscopy in order to extract crater depth, sputtering yield, and roughness values. The main observation is that the crater roughness strongly increases in all cases when NPs are mixed with the polymer. However, there are specific behaviors depending on the NP inclusion types and the chosen primary beams. The observed effects are tentatively explained on the basis of fundamental studies of atom and cluster-induced sputtering

Endoglin co-expression with eNOS, SMAD2 and phosphorylated SMAD23 in normocholesterolemic and hypercholesterolemic mice: an immunohistochemical study

Endoglin, a homodimeric transmembrane glycoprotein, is a part of the transforming growth factorß (TGF-ß) receptor cascade. It has been demonstrated that endoglin can affect TGF-ß signaling and eNOS expression by affecting SMAD proteins in vitro. We planned to go one step forward and evaluate whether endoglin is co-expressed with SMAD2, phosphorylated SMAD2/3 protein and eNOS in endothelium of normocholesterolemic C57BL/6J mice, and in advanced atherosclerotic lesions in hypercholesterolemic apoE/LDLr-deficient mice by means of fluorescence immunohistochemistry. Female C57BL/6J mice were fed with a chow diet (standard laboratory diet) for 12 weeks after weaning (at the age of 4 weeks). Two-month-old female apoE/LDLrdeficient mice were fed the western type diet (atherogenic diet) containing 21% fat (11% saturated fat) and 0.15% cholesterol for 2 months. Immunohistochemical analysis of endoglin, SMAD2, phosphorylated SMAD2/3 and eNOS expression was performed in mice aortic sinus. Immunohistochemical analysis showed the expression of endoglin in intact endothelium in both C57BL/6J and apoE/LDLr-deficient mice and in endothelium covering the atherosclerotic lesion in apoE/LDLr-deficient mice. Fluorescence immunohistochemistry revealed co-expression of endoglin with SMAD2, phosphorylated SMAD2/3 and eNOS in intact aortic endothelium in C57BL/6J mice. Moreover, strong co-localization of endoglin, SMAD2, phosphorylated SMAD2/3 and eNOS was also detected in endothelium covering atherosclerotic lesions in apoE/LDLr-deficient mice. In conclusion, we suggest that endoglin, SMAD2, phosphorylated SMAD2/3 and eNOS may be important in vessel endothelium homeostasis underlying their role in atherogenesis

Adenylate cyclase toxin translocates across target cell membrane without forming a pore

The adenylate cyclase toxin-haemolysin of Bordetella (CyaA) targets CD11b(+) myeloid phagocytes and translocates across their cytoplasmic membrane an adenylate cyclase (AC) enzyme that catalyses conversion of cytosolic ATP into cAMP. In parallel, CyaA acts as a cytolysin forming cation-selective pores, which permeabilize cell membrane and eventually provoke cell lysis. Using cytolytic activity, potassium efflux and patch-clamp assays, we show that a combination of substitutions within the pore-forming (E570Q) and acylation-bearing domain (K860R) ablates selectively the cell-permeabilizing activity of CyaA. At the same time, however, the capacity of such mutant CyaA to translocate the AC domain across cytoplasmic membrane into cytosol of macrophage cells and to elevate cellular cAMP concentrations remained intact. Moreover, the combination of E570Q+K860R substitutions suppressed the residual cytolytic activity of the enzymatically inactive CyaA/OVA/AC(-) toxoid on CD11b-expressing monocytes, while leaving unaffected the capacity of the mutant toxoid to deliver in vitro a reporter CD8(+) T cell epitope from ovalbumin (OVA) to the cytosolic pathway of dendritic cells for MHC class I-restricted presentation and induce in vivo an OVA-specific cytotoxic T cell response. CyaA, hence, employs a mechanism of AC enzyme domain translocation across cellular membrane that avoids passage across the cytolytic pore formed by toxin oligomers

A quantitative determination of the polymerization of benzoxazine thin coatings by time‐of‐flight secondary ion mass spectrometry

Phenol‐paraphenylenediamine (P‐pPDA) benzoxazines exhibit excellent barrier properties, adequate to protect aluminum alloys from corrosion, and constitute interesting candidates to replace chromate‐containing coatings in the aeronautical industry. For the successful application of P‐pPDA coatings, it is necessary to decrease the curing temperature to avoid the delamination of the coating while preserving the mechanical properties of the alloy, as well as the barrier properties of the coating. However, decreasing the curing temperature leads to less polymerized films, the extent of which requires a quantitative assessment. While the conversion rate of the polymerization reaction is commonly evaluated for bulk samples using differential scanning calorimetry (DSC), a tool for its evaluation in thin films is missing. Therefore, a new approach was developed for that matter using time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS). The relation between the SIMS data integrated from inside thin films and the DSC results obtained on bulk samples with the same curing cycle allowed to calibrate the SIMS data. With this preliminary calibration of the technique, the polymerization of PpPDA coatings can be locally determined, at the surface and along the depth of the coating, using dual‐beam depth profiling with large argon cluster beam sputtering

A quantitative determination of the polymerization of benzoxazine thin coatings by time‐of‐flight secondary ion mass spectrometry

Phenol‐paraphenylenediamine (P‐pPDA) benzoxazines exhibit excellent barrier properties, adequate to protect aluminum alloys from corrosion, and constitute interesting candidates to replace chromate‐containing coatings in the aeronautical industry. For the successful application of P‐pPDA coatings, it is necessary to decrease the curing temperature to avoid the delamination of the coating while preserving the mechanical properties of the alloy, as well as the barrier properties of the coating. However, decreasing the curing temperature leads to less polymerized films, the extent of which requires a quantitative assessment. While the conversion rate of the polymerization reaction is commonly evaluated for bulk samples using differential scanning calorimetry (DSC), a tool for its evaluation in thin films is missing. Therefore, a new approach was developed for that matter using time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS). The relation between the SIMS data integrated from inside thin films and the DSC results obtained on bulk samples with the same curing cycle allowed to calibrate the SIMS data. With this preliminary calibration of the technique, the polymerization of PpPDA coatings can be locally determined, at the surface and along the depth of the coating, using dual‐beam depth profiling with large argon cluster beam sputtering