Comparison of different ultra-high-frequency transponder ear tags for simultaneous detection of cattle and pigs

AbstractElectronic animal identification is an important technology in modern animal husbandry providing great benefits. Low-frequency applications are state-of-the-art within the radio frequency identification of animals. Quasi-simultaneous detection of several animals and reading of the transponders over longer distances is impossible with low-frequency systems. Ultra-high-frequency (UHF) applications are suitable for this purpose. However, UHF systems have disadvantages through their susceptibility to metallic surfaces and liquids. Thus, the reflection and absorption of electromagnetic radiation in the animals' environment is often problematic. Consequently, an adjustment of the transponder ear tags regarding mechanical stability and functionality close to water (ear tissue) is necessary. In this project, targeted adjustments and a further development of UHF transponder ear tags concerning the resonance frequency were made. Three trials with cattle and two trials with pigs were performed in this study. Cattle were driven through a reader gate for ten rounds and six different types of transponder ear tags designed in-house were tested. The influence of the environment (indoor vs. outdoor), reader orientation at the gate (sideways vs. above) and output power of the readers (1.0 vs. 0.5W) were tested in two experiments. The average number of readings per round and the reading rates of the transponder ear tag types were taken as target variables. In the trials with pigs, three transponder ear tag types were compared. The animals were driven through the gate for five rounds per repetition, but neither the reader output power nor the reader orientation were varied. The pig experiments were performed indoors.The results of the cattle experiments showed that the average number of readings per round and the reading rates were significantly higher indoors compared to outdoors. The reader output power of 1.0W achieved significantly better results compared to 0.5W. The same applied to the reader orientation ‘above’ compared to ‘sideways’. It could also be shown that an improvement of the transponder and, thus, an adjustment to the animal's ear could be achieved during transponder ear tag type development. A maximum reading rate of 100% was reached with the cattle transponder types finally developed (B3-4, B4-4 and B5).In addition, an average reading rate of 100% was achieved for one pig transponder ear tag type (C2). However, these experiments have to be treated with caution due to a very low sample size

Qorpo-Santo e o teatro das relações : antropologia, literatura e loucura

Orientadora: Profª Drª Selma BaptistaAutor não autorizou a divulgação do arquivo digitalDissertação (mestrado) - Universidade Federal do Parana, Setor de Ciencias Humanas, Letras e Artes, Programa de Pós-Graduação em Antropologia. Defesa: Curitiba, 15/12/2010Bibliografia: fls. 172-175Área de concentração: Antropologia socialResumo: Este trabalho trata da análise etnográfica das dezessete peças teatrais de José Joaquim de Campos Leão Qorpo-Santo, escritas entre 31 de janeiro e 16 de junho de 1866, não encenadas pelo período de cem anos. Através da noção de pessoa em Antropologia e de personagem na ficção, é traçada a construção da personagem Qorpo-Santo em sua construção autobiográfica como autor e o reconhecimento biográfico e bibliográfico do autor através do tempo. O tempo é um fator propulsor desta análise, por conta de sua passagem acarretar processos históricos, sociais e culturais que permitiram que um escritor considerado louco (autodenominado santo) fosse reconhecido como autor e, um texto outrora marginalizado, viesse a ser reconhecido como obra. O curto período em que as peças foram escritas resultou em um conjunto de textos teatrais de curta duração aglomerados de personagens, cenários e situações que revelam uma obra complexa: histórica, sociológica e testemunhal. Estas situações são explanadas por meio da compreensão da intertextualidade e hipertextualidade como leituras possíveis, devido ao diálogo que apresentam com outras obras e ao entrelaçamento entre as peças, possibilitando a expansão da narrativa em analogia com a análise estrutural do mito, conforme Claude Lévi-Strauss.Abstract: This paper brings an ethnographic analysis of the seventeen theater plays by José Joaquim de Campos Leão Qorpo-Santo, written in 1866 between January 31st and June 16th, yet not performed for one hundred years. Through the notion of person in Anthropology and of character in fiction, the construction of the character Qorpo Santo is described in its autobiographic construction as an author, as well as his biographic and bibliographic recognition through time. Time is a propelling factor in this analysis, due to the fact that its passage entails historical, social and cultural processes which allowed a writer considered insane (self-proclaimed saint) to be recognized as an author, and a text, once considered marginal, to come out as oeuvre. The brief period in which the plays were written resulted in a set of short play scripts full of characters, sets and situations which reveal a complex work: historical, sociological and testimonial. These situations are explained through the understanding of intertextuality and hypertextuality as possible readings, on account of the dialogue with other work and the entwinement among them, enabling the expansion of the narrative into an analogy with the structural study of myth by Claude Lévi-Strauss

Understanding frailty:a qualitative study of European healthcare policy-makers' approaches to frailty screening and management

OBJECTIVE: To elicit European healthcare policy-makers' views, understanding and attitudes about the implementation of frailty screening and management strategies and responses to stakeholders' views. DESIGN: Thematic analysis of semistructured qualitative interviews. SETTING: European healthcare policy departments. PARTICIPANTS: Seven European healthcare policy-makers representing the European Union (n=2), UK (n=2), Italy (n=1), Spain (n=1) and Poland (n=1). Participants were sourced through professional networks and the European Commission Authentication Service website and were required to be in an active healthcare policy or decision-making role. RESULTS: Seven themes were identified. Our findings reveal a 'knowledge gap', around frailty and awareness of the malleability of frailty, which has resulted in restricted ownership of frailty by specialists. Policy-makers emphasised the need to recognise frailty as a clinical syndrome but stressed that it should be managed via an integrated and interdisciplinary response to chronicity and ageing. That is, through social co-production. This would require a culture shift in care with redeployment of existing resources to deliver frailty management and intervention services. Policy-makers proposed barriers to a culture shift, indicating a need to be innovative with solutions to empower older adults to optimise their health and well-being, while still fully engaging in the social environment. The cultural acceptance of an integrated care system theme described the complexities of institutional change management, as well as cultural issues relating to working democratically, while in signposting adult care, the need for a personal navigator to help older adults to access appropriate services was proposed. Policy-makers also believed that screening for frailty could be an effective tool for frailty management. CONCLUSIONS: There is potential for frailty to be managed in a more integrated and person-centred manner, overcoming the challenges associated with niche ownership within the healthcare system. There is also a need to raise its profile and develop a common understanding of its malleability among stakeholders, as well as consistency in how and when it is measured

Jahn-Teller effects in initial and final states: high-resolution X-ray absorption, photoelectron and Auger spectroscopy of allene

Carbon K-edge resonant Auger spectra of gas-phase allene following excitation of the pre-edge 1s → π* transitions are presented and analysed with the support of EOM-CCSD/cc-pVTZ calculations. X-Ray absorption (XAS), X-ray photoelectron (XPS), valence band and non-resonant Auger spectra are also reanalysed with a series of computational approaches. The results presented demonstrate the importance of including nuclear ensemble effects for simulating X-ray observables and as an effective strategy for capturing Jahn-Teller effects in spectra

Devotions for Advent 2022 Canticles of Luke

Each week of this Advent devotional will focus on one of the four Lukan canticles, putting it in its context as well as making connections to other portions of Scripture. At the end of this Advent season, may we, like those who have gone before us, “sing to the Lord, bless his name; tell of his salvation from day to day” (Ps. 96:2). Many thanks to all the CSL and CTSFW students who contributed devotional reflections. A special note of thanks to my counterpart, Zachary Roll, who organized this effort at Concordia Seminary, St. Louis who has been a joy to work with and to get to know. A final note of thanks to Kim Hosier in the print shop and Rev. Dr. Paul Grime for their aid in completing this devotional booklet.https://scholar.csl.edu/osp/1021/thumbnail.jp

Cholesterol transfer via endoplasmic reticulum contacts mediates lysosome damage repair

Lysosome integrity is essential for cell viability, and lesions in lysosome membranes are repaired by the ESCRT machinery. Here, we describe an additional mechanism for lysosome repair that is activated independently of ESCRT recruitment. Lipidomic analyses showed increases in lysosomal phosphatidylserine and cholesterol after damage. Electron microscopy demonstrated that lysosomal membrane damage is rapidly followed by the formation of contacts with the endoplasmic reticulum (ER), which depends on the ER proteins VAPA/B. The cholesterol-binding protein ORP1L was recruited to damaged lysosomes, accompanied by cholesterol accumulation by a mechanism that required VAP-ORP1L interactions. The PtdIns 4-kinase PI4K2A rapidly produced PtdIns4P on lysosomes upon damage, and knockout of PI4K2A inhibited damage-induced accumulation of ORP1L and cholesterol and led to the failure of lysosomal membrane repair. The cholesterol-PtdIns4P transporter OSBP was also recruited upon damage, and its depletion caused lysosomal accumulation of PtdIns4P and resulted in cell death. We conclude that ER contacts are activated on damaged lysosomes in parallel to ESCRTs to provide lipids for membrane repair, and that PtdIns4P generation and removal are central in this response.Peer reviewe

Environmental controls, oceanography and population dynamics of pathogens and harmful algal blooms: connecting sources to human exposure

© 2008 Author et al. This is an open access article distributed under the terms of the Creative Commons Attribution License. The definitive version was published in Environmental Health 7 (2008): S5, doi:10.1186/1476-069X-7-S2-S5.Coupled physical-biological models are capable of linking the complex interactions between environmental factors and physical hydrodynamics to simulate the growth, toxicity and transport of infectious pathogens and harmful algal blooms (HABs). Such simulations can be used to assess and predict the impact of pathogens and HABs on human health. Given the widespread and increasing reliance of coastal communities on aquatic systems for drinking water, seafood and recreation, such predictions are critical for making informed resource management decisions. Here we identify three challenges to making this connection between pathogens/HABs and human health: predicting concentrations and toxicity; identifying the spatial and temporal scales of population and ecosystem interactions; and applying the understanding of population dynamics of pathogens/HABs to management strategies. We elaborate on the need to meet each of these challenges, describe how modeling approaches can be used and discuss strategies for moving forward in addressing these challenges.The authors acknowledge the financial support for the NSF/NIEHS and NOAA Centers for Oceans and Human Healt

Risk Factors Associated With SARS-CoV-2 Infection Among Farmworkers in Monterey County, California.

Importance: Essential workers in agriculture and food production have been severely affected by the ongoing COVID-19 pandemic. Objective: To identify risk factors associated with SARS-CoV-2 infection among farmworkers in California. Design, Setting, and Participants: This cross-sectional study invited farmworkers in California's Salinas Valley (Monterey County) receiving transcription-mediated amplification (TMA) tests for SARS-CoV-2 infection at federally qualified community clinics and community sites to participate. Individuals were eligible if they were not pregnant, were 18 years or older, had conducted farmwork since the pandemic started, and were proficient in English or Spanish. Survey data were collected and SARS-CoV-2 tests were conducted among participants from July 16 to November 30, 2020. Exposures: Sociodemographic, household, community, and workplace characteristics. Main Outcomes and Measures: TMA- and immunoglobulin G (IgG)-positive SARS-CoV-2 infection. Results: A total of 1107 farmworkers (581 [52.5%] women; mean [SD] age, 39.7 [12.6] years) were included in these analyses. Most participants were born in Mexico (922 [83.3%]), were married or living with a partner (697 [63.0%]), and worked in the fields (825 [74.5%]). Overall, 118 of 911 (13.0%) had a positive result on their TMA test for SARS-CoV-2 infection, whereas 201 of 1058 (19.0%) had antibody evidence of infection. In multivariable analyses accounting for recruitment venue and enrollment period, the incidence of TMA-positive SARS-CoV-2 infection was higher among those with lower than primary school-level education (adjusted relative risk [aRR], 1.32; 95% CI, 0.99-1.76; non-statistically significant finding), who spoke an Indigenous language at home (aRR, 1.30; 95% CI, 0.97-1.73; non-statistically significant finding), who worked in the fields (aRR, 1.60; 95% CI, 1.03-2.50), and who were exposed to a known or suspected COVID-19 case at home (aRR, 2.98; 95% CI, 2.06-4.32) or in the workplace (aRR, 1.59; 95% CI, 1.18-2.14). Positive results on IgG tests for SARS-CoV-2 infection were more common among those who lived in crowded housing (aRR, 1.23; 95% CI, 0.98-1.53; non-statistically significant finding), with children aged 5 years or younger (aRR, 1.40; 95% CI, 1.11-1.76), with unrelated roommates (aRR, 1.40; 95% CI, 1.19-1.64), and with an individual with known or suspected COVID-19 (aRR, 1.59; 95% CI, 1.13-2.24). The risk of IgG positivity was also higher among those with body mass index of 30 or greater (aRR, 1.65; 95% CI, 1.01-2.70) or diabetes (aRR, 1.31; 95% CI, 0.98-1.75; non-statistically significant finding). Conclusions and Relevance: In this cross-sectional study of farmworkers in California, both residential and workplace exposures were associated with SARS-CoV-2 infection. Urgent distribution of COVID-19 vaccines and intervention on modifiable risk factors are warranted given this population's increased risk of infection and the essential nature of their work

Scalable production of large quantities of defect-free few-layer graphene by shear exfoliation in liquids

To progress from the laboratory to commercial applications, it will be necessary to develop industrially scalable methods to produce large quantities of defect-free graphene. Here we show that high-shear mixing of graphite in suitable stabilizing liquids results in large-scale exfoliation to give dispersions of graphene nanosheets. X-ray photoelectron spectroscopy and Raman spectroscopy show the exfoliated flakes to be unoxidized and free of basal-plane defects. We have developed a simple model that shows exfoliation to occur once the local shear rate exceeds 10(4) s(-1). By fully characterizing the scaling behaviour of the graphene production rate, we show that exfoliation can be achieved in liquid volumes from hundreds of millilitres up to hundreds of litres and beyond. The graphene produced by this method performs well in applications from composites to conductive coatings. This method can be applied to exfoliate BN, MoS2 and a range of other layered crystals