Characterization and Performance Evaluation of Dye Sensitized Solar Cell Using Nanostructured TiO 2

Metal-free organic sensitizer consisting of donor, electron conducting, and anchoring anhydride groups was engineered at molecular level and synthesized. Dye sensitized solar cells based on conjugated naphthalene dye were fabricated using nanoporous electrode. Photoelectrodes with a 7 μm thick nanoporous layer and a 5 μm thick light-scattering layer were used to fabricate dye sensitized solar cells. DSSCs were fabricated in a FTO/nc-TiO2/organic dye/I-/I3-/Pt/FTO device geometry. Dye sensitized solar cell was characterized by current density-voltage (J-V) measurement. All current-voltage (I-V) measurements were done under 100 mW/cm2 light intensity and AM 1.5 conditions. The photovoltaic data revealed a short circuit photocurrent density of 1.86 mA/cm2, an open circuit voltage of 430 mV, and a fill factor of 0.63, corresponding to an overall conversion efficiency of 0.53%

Perovskite solar cells fabricated using dicarboxylic fullerene derivatives

Perovskite solar cells were first fabricated in dye sensitized solar cells. But also, perovskite hybrid solar cells were demonstrated to be among the most promising candidates within the emerging photovoltaic materials with their high power conversion efficiencies and low-cost fabrication. In this work, we design and synthesize a novel benzoic acid fullerene bis adduct material (BAFB) for use in perovskite hybrid organic–inorganic solar cells. The obtained maximum efficiency is reported to be 9.63% using a novel benzoic acid fullerene bis adduct (BAFB) for perovskite heterojunction solar cells

Device Performance of Emerging Photovoltaic Materials (Version 3)

Following the 2nd release of the “Emerging PV reports,” the best achievements in the performance of emerging photovoltaic devices in diverse emerging photovoltaic research subjects are summarized, as reported in peer-reviewed articles in academic journals since August 2021. Updated graphs, tables, and analyses are provided with several performance parameters, e.g., power conversion efficiency, open-circuit voltage, short-circuit current density, fill factor, light utilization efficiency, and stability test energy yield. These parameters are presented as a function of the photovoltaic bandgap energy and the average visible transmittance for each technology and application, and are put into perspective using, e.g., the detailed balance efficiency limit. The 3rd installment of the “Emerging PV reports” extends the scope toward triple junction solar cells

Device Performance of Emerging Photovoltaic Materials (Version 3)

Following the 2nd release of the “Emerging PV reports,” the best achievements in the performance of emerging photovoltaic devices in diverse emerging photovoltaic research subjects are summarized, as reported in peer-reviewed articles in academic journals since August 2021. Updated graphs, tables, and analyses are provided with several performance parameters, e.g., power conversion efficiency, open-circuit voltage, short-circuit current density, fill factor, light utilization efficiency, and stability test energy yield. These parameters are presented as a function of the photovoltaic bandgap energy and the average visible transmittance for each technology and application, and are put into perspective using, e.g., the detailed balance efficiency limit. The 3rd installment of the “Emerging PV reports” extends the scope toward triple junction solar cells

Device Performance of Emerging Photovoltaic Materials (Version 2)

Following the 1st release of the “Emerging photovoltaic (PV) reports”, the best achievements in the performance of emerging photovoltaic devices in diverse emerging photovoltaic research subjects are summarized, as reported in peer-reviewed articles in academic journals since August 2020. Updated graphs, tables, and analyses are provided with several performance parameters, e.g., power conversion efficiency, open-circuit voltage, short-circuit current density, fill factor, light utilization efficiency, and stability test energy yield. These parameters are presented as a function of the photovoltaic bandgap energy and the average visible transmittance for each technology and application and are put into perspective using, e.g., the detailed balance efficiency limit. The 2nd instalment of the “Emerging PV reports” extends the scope toward tandem solar cells and presents the current state-of-the-art in tandem solar cell performance for various material combinations.</p

Device Performance of Emerging Photovoltaic Materials (Version 1)

Emerging photovoltaics (PVs) focus on a variety of applications complementing large scale electricity generation. Organic, dye‐sensitized, and some perovskite solar cells are considered in building integration, greenhouses, wearable, and indoor applications, thereby motivating research on flexible, transparent, semitransparent, and multi‐junction PVs. Nevertheless, it can be very time consuming to find or develop an up‐to‐date overview of the state‐of‐the‐art performance for these systems and applications. Two important resources for recording research cells efficiencies are the National Renewable Energy Laboratory chart and the efficiency tables compiled biannually by Martin Green and colleagues. Both publications provide an effective coverage over the established technologies, bridging research and industry. An alternative approach is proposed here summarizing the best reports in the diverse research subjects for emerging PVs. Best performance parameters are provided as a function of the photovoltaic bandgap energy for each technology and application, and are put into perspective using, e.g., the Shockley–Queisser limit. In all cases, the reported data correspond to published and/or properly described certified results, with enough details provided for prospective data reproduction. Additionally, the stability test energy yield is included as an analysis parameter among state‐of‐the‐art emerging PVs

Photovoltaic Performance of ZnO Nanorod and ZnO : CdO Nanocomposite Layers in Dye-Sensitized Solar Cells (DSSCs)

Triphenylene diamine sensitizer comprising donor, electron conducting, and anchoring group is synthesized for a potential application in dye-sensitized solar cells. Absorption spectrum, electrochemical and photovoltaic properties of triphenylene diamine have been investigated. Two different electrodes are used for dye-sensitized solar cells. The performances of ZnO nanorod electrodes are compared to ZnO : CdO nanocomposite electrode. Also, the theoretical calculations for HOMO and LUMO orbitals are used to estimate the photovoltaic properties of organic sensitizer in the design stage. ZnO : CdO nanocomposite electrode-based dye-sensitized solar cell sensitized with organic sensitizer exhibits higher efficiencies than ZnO nanorod electrode. For a typical device, a solar energy conversion efficiency (η) of 0.80 based on ZnO : CdO nanocomposite is achieved under simulated AM 1.5 solar irradiation (100 mW cm−2) with a short circuit photocurrent density (Jsc) of 3.10 mA/cm2, an open-circuit voltage (Voc) of 480 mV, and a fill factor (FF) of 0.57. These results suggest that the ZnO : CdO nanocomposite system is a good selection and a promising candidate for electrode system in dye-sensitized solar cells

Photovoltaic effect of nanostructured TiO2 layers in dye sensitized solar cells

WOS: 000310498600009Metal-free organic sensitizer comprising donor, electron-conducting, and anchoring groups is engineered at a molecular level and synthesized for sensitization of mesoscopic titanium dioxide injection solar cells. The organic sensitizer anchored onto TiO2 and is tested in dye sensitized solar cell with a volatile electrolyte system. In order to see the TiO2 thickness dependence study of the triphenylene diamine based sensitizer on photovoltaic properties, we have fabricated dye sensitized solar cells having TiO2 films of various thicknesses. The efficiency increased with the thickness of TiO2 nanocrystalline layer; on the other hand, the photovoltage remained the same with increasing thickness. The increased surface area due to higher thickness of TiO2 film allows for better light harvesting, which however enhances the possibility for injected electrons to recombine with the oxidized redox species triiodide. TPD-sensitized solar cell devices using a 10 (transparent) + 4 (scattering) mu m thin TiO2 layer yielded a short-circuit photocurrent density of 7.70 mA/cm(2), an open-circuit voltage of 800 mV, and a fill factor of 0.54, corresponding to an overall conversion efficiency of 3.34 % under standard AM 1.5 sun light.Alexander von Humboldt Foundation (AvH)Alexander von Humboldt FoundationI thank the Alexander von Humboldt Foundation (AvH) for supporting me scientifically. Also I thank Scientific Research Council of Turkey (TUBITAK). I thank Mechanical Engineer MSc. Cagatay ELA for his unending support and fruithful advices