Improved Performance and Stability of Organic Solar Cells by the Incorporation of a Block Copolymer Interfacial Layer

In a proof-of-concept study, this work demonstrates that incorporating a specifically designed block copolymer as an interfacial layer between a charge transport layer and the photoactive layer in organic solar cells can enhance the interface between these layers leading to both performance and stability improvements of the device. This is achieved by incorporating a P3HT50-b-PSSx block copolymer as an interfacial layer between the hole transporting and photoactive layers, which results in the improvement of the interfacial roughness, energy level alignment, and stability between these layers. Specifically, the incorporation of a 10 nm P3HT50-b-PSS16 and a 13 nm P3HT50-b-PSS23 interfacial layer results in a 9% and a 12% increase in device efficiency respectively compared to the reference devices. In addition to having a higher initial efficiency, the devices with the block copolymer continue to have a higher normalized efficiency than the control devices after 2200 h of storage, demonstrating that the block copolymer not only improves device efficiency, but crucially, prevents degradation by stabilizing the interface between the hole transporting layer and the photoactive layer. This study proves that appropriately designed and optimized block copolymers can simultaneously stabilize and improve the efficiency of organic solar cells

Managing Local Order in Conjugated Polymer Blends via Polarity Contrast

The optoelectronic landscape of conjugated polymers is intimately related to their molecular arrangement and packing, with minute changes in local order, such as chain conformation and torsional backbone order/disorder, frequently having a substantial effect on macroscopic properties. While many of these local features can be manipulated via chemical design, the synthesis of a series of compounds is often required to elucidate correlations between chemical structure and macromolecular ordering. Here, we show that blending semiconducting polymers with insulating commodity plastics enables controlled manipulation of the semiconductor backbone planarity. The key is to create a polarity difference between the semiconductor backbone and its side chains, while matching the polarity of the side chains and the additive. We demonstrate the applicability of this approach through judicious comparison of regioregular poly(3-hexylthiophene) (P3HT) with two of its more polar derivatives, namely the diblock copolymer poly(3-hexylthiophene)-block-poly(ethylene oxide) (P3HT-b-PEO) and the graft polymer poly[3-but(ethylene oxide)thiophene] (P3BEOT), as well as their blends with poly(ethylene oxide) (PEO). Proximity between polar side chains and a similarly polar additive reduces steric hindrance between individual chain segments by essentially "expelling" the side chains away from the semiconducting backbones. This process, shown to be facilitated via exposure to polar environments such as humid air/water vapor, facilitates backbone realignment toward specific chain arrangements and, in particular, planar backbone configurations

Facile synthesis and proposed mechanism of α,ω‐oxetanyl-telechelic poly(3-nitratomethyl-3-methyl oxetane) by an SN2(i) nitrato displacement method in basic media

The synthesis of a novel heterocyclic–telechelic polymer, α,ω-oxetanyl-telechelic poly(3-nitratomethyl-3-methyl oxetane), is described. Infrared spectroscopy (IR), gel permeation chromatography (GPC), and nuclear magnetic resonance (NMR) spectroscopy have been used to confirm the successful synthesis, demonstrating the presence of the telechelic-oxetanyl moieties. Synthesis of the terminal functionalities has been achieved via displacement of nitrato groups, in a manner similar to that employed with other leaving groups such as azido, bromo, and nitro, initiated by nucleophiles. In the present case, displacement occurs on the ends of a nitrato-functionalized polymer driven by the formation of sodium nitrate, which is supported by the polar aprotic solvent N,N-dimethyl formamide. The formation of an alkoxide at the polymer chain ends is favored and allows internal back-biting to the nearest carbon bearing the nitrato group, intrinsically in an SN2(i) reaction, leading to α,ω-oxetanyl functionalization. The telechelic-oxetanyl moieties have the potential to be cross-linked by chemical (e.g., acidic) or radiative (e.g., ultraviolet) curing methods without the use of high temperatures, usually below 100°C. This type of material was designed for future use as a contraband simulant, whereby it would form the predominant constituent of elastomeric composites comprising rubbery polymer with small quantities of solids, typically crystals of contraband substances, such as explosives or narcotics. This method also provides an alternative approach to ring closure and synthesis of heterocycles

Synthesis and photovoltaic applications of novel copolymers based on poly(3-hexylthiophene)

Dans cette étude, des copolymères à blocs rigide-flexible comprenant des segments donneur [poly(3-hexylthiophène) régiorégulier, (rr-P3HT)] et accepteurs d’électrons (C60) ont été synthétisés. L’auto-assemblage en masse de ces copolymères à blocs avait pour objectif d’atteindre des morphologies dont la taille des domaines coïncide avec la distance idéale de transport de l’exciton (~10 nm) en vue d’utiliser ces systèmes comme matériaux de couche active dans les cellules photovoltaïques organiques de type P3HT-PCBM.La maîtrise et l'optimisation des conditions de synthèse de rr-P3HT de fonctionnalité terminale bien définie nous ont permis d'accéder à différentes architectures de copolymères linéaires di- et triblocs, constitués de P3HT comme bloc rigide et de polystyrène ou poly(4-vinylpyridine) comme bloc ‘flexible’. La fonctionnalisation du bloc flexible avec des dérivés du fullerène (C60 ou PCBM) a ensuite été réalisée et ces copolymères utilisés comme additifs pour stabiliser la morphologie de la couche active des cellules solaires organiques de type P3HT/PCBM. Les caractéristiques photovoltaïques des matériaux ainsi préparés ont été déterminées et corrélées aux analyses morphologiques de la couche active.The performance of organic photovoltaic cells mainly depends on the active layer nano-morphology. Rod-coil block copolymers (BCPs) are well known in their ability to self-assemble into well-ordered nanoscopic morphologies. BCPs containing electron-donor and acceptor segments are of particular interest for use in photovoltaic cells because electronic light-excited states exist over distances similar to the typical size of block copolymer domains (~10 nm). Therefore, we designed novel donor-acceptor BCPs to exploit this coincidence in dimensions. This thesis is focused on BCPs based on regioregular poly(3-hexylthiophene) (rr-P3HT) due to its high hole mobility and good processibility from various solvents. Simplified and versatile syntheses of donor-acceptor rod-coil di- and tri- BCPs consisting of the donor block P3HT (rod) and polystyrene or poly(4-vinylpyridine) (coil) blocks to carry the acceptor C60 in different ways were developed. These materials were used as surfactants to stabilize the nano-morphology of reference P3HT: [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) based devices. Photovoltaic characterizations were then tied to copolymer structural data with the help of AFM and a range of complementary characterization techniques

Synthèse et application en cellules solaires organiques de nouveaux copolymères à base de poly(3-hexylthiophène)

Dans cette étude, des copolymères à blocs rigide-flexible comprenant des segments donneur [poly(3-hexylthiophène) régiorégulier, (rr-P3HT)] et accepteurs d’électrons (C60) ont été synthétisés. L’auto-assemblage en masse de ces copolymères à blocs avait pour objectif d’atteindre des morphologies dont la taille des domaines coïncide avec la distance idéale de transport de l’exciton (~10 nm) en vue d’utiliser ces systèmes comme matériaux de couche active dans les cellules photovoltaïques organiques de type P3HT-PCBM.La maîtrise et l'optimisation des conditions de synthèse de rr-P3HT de fonctionnalité terminale bien définie nous ont permis d'accéder à différentes architectures de copolymères linéaires di- et triblocs, constitués de P3HT comme bloc rigide et de polystyrène ou poly(4-vinylpyridine) comme bloc ‘flexible’. La fonctionnalisation du bloc flexible avec des dérivés du fullerène (C60 ou PCBM) a ensuite été réalisée et ces copolymères utilisés comme additifs pour stabiliser la morphologie de la couche active des cellules solaires organiques de type P3HT/PCBM. Les caractéristiques photovoltaïques des matériaux ainsi préparés ont été déterminées et corrélées aux analyses morphologiques de la couche active.The performance of organic photovoltaic cells mainly depends on the active layer nano-morphology. Rod-coil block copolymers (BCPs) are well known in their ability to self-assemble into well-ordered nanoscopic morphologies. BCPs containing electron-donor and acceptor segments are of particular interest for use in photovoltaic cells because electronic light-excited states exist over distances similar to the typical size of block copolymer domains (~10 nm). Therefore, we designed novel donor-acceptor BCPs to exploit this coincidence in dimensions. This thesis is focused on BCPs based on regioregular poly(3-hexylthiophene) (rr-P3HT) due to its high hole mobility and good processibility from various solvents. Simplified and versatile syntheses of donor-acceptor rod-coil di- and tri- BCPs consisting of the donor block P3HT (rod) and polystyrene or poly(4-vinylpyridine) (coil) blocks to carry the acceptor C60 in different ways were developed. These materials were used as surfactants to stabilize the nano-morphology of reference P3HT: [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) based devices. Photovoltaic characterizations were then tied to copolymer structural data with the help of AFM and a range of complementary characterization techniques

Synthesis and photovoltaic applications of novel copolymers based on poly(3-hexylthiophene)

Dans cette étude, des copolymères à blocs rigide-flexible comprenant des segments donneur [poly(3-hexylthiophène) régiorégulier, (rr-P3HT)] et accepteurs d électrons (C60) ont été synthétisés. L auto-assemblage en masse de ces copolymères à blocs avait pour objectif d atteindre des morphologies dont la taille des domaines coïncide avec la distance idéale de transport de l exciton (~10 nm) en vue d utiliser ces systèmes comme matériaux de couche active dans les cellules photovoltaïques organiques de type P3HT-PCBM.La maîtrise et l'optimisation des conditions de synthèse de rr-P3HT de fonctionnalité terminale bien définie nous ont permis d'accéder à différentes architectures de copolymères linéaires di- et triblocs, constitués de P3HT comme bloc rigide et de polystyrène ou poly(4-vinylpyridine) comme bloc flexible . La fonctionnalisation du bloc flexible avec des dérivés du fullerène (C60 ou PCBM) a ensuite été réalisée et ces copolymères utilisés comme additifs pour stabiliser la morphologie de la couche active des cellules solaires organiques de type P3HT/PCBM. Les caractéristiques photovoltaïques des matériaux ainsi préparés ont été déterminées et corrélées aux analyses morphologiques de la couche active.The performance of organic photovoltaic cells mainly depends on the active layer nano-morphology. Rod-coil block copolymers (BCPs) are well known in their ability to self-assemble into well-ordered nanoscopic morphologies. BCPs containing electron-donor and acceptor segments are of particular interest for use in photovoltaic cells because electronic light-excited states exist over distances similar to the typical size of block copolymer domains (~10 nm). Therefore, we designed novel donor-acceptor BCPs to exploit this coincidence in dimensions. This thesis is focused on BCPs based on regioregular poly(3-hexylthiophene) (rr-P3HT) due to its high hole mobility and good processibility from various solvents. Simplified and versatile syntheses of donor-acceptor rod-coil di- and tri- BCPs consisting of the donor block P3HT (rod) and polystyrene or poly(4-vinylpyridine) (coil) blocks to carry the acceptor C60 in different ways were developed. These materials were used as surfactants to stabilize the nano-morphology of reference P3HT: [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) based devices. Photovoltaic characterizations were then tied to copolymer structural data with the help of AFM and a range of complementary characterization techniques.BORDEAUX1-Bib.electronique (335229901) / SudocSudocFranceF

Poly(3-hexylthiophene) based block copolymers prepared by "click" chemistry

pi-Conjugated block copolymers have been prepared from terminal azide functionalized polystyrenes (PS) and alkyne functionalized poly (3-hexylthiophene)s (P3HT) via a copper(I) catalyzed Huisgen [3 + 2] dipolar cycloaddition reaction. The functionalized alpha-azido-PS homopolymer was prepared by atom transfer radical polymerization from a specifically designed initiator bearing the azide function, whereas omega-ethynyl-P3HT and a,alpha,omega-pentynyl-P3HT were synthesized by a modified Grignard metathesis polymerization using alkynyl Grignard derivatives. The electronic environment of the alkynyl end groups was shown to be decisive in determining triazole ring formation

Fullerene-capped copolymers for bulk heterojunctions: device stability and efficiency improvements

A fullerene end-capped polymer-compatibilizer based on poly(3-hexylthiophene) (P3HT) was synthesized and demonstrated to have a remarkable effect on both the stability and efficiency of devices made from exemplar P3HT and [6,6]-phenyl C-61-butyric acid methyl ester (PCBM). P3HT with ethynyl chain-ends and alpha-azido-omega-bromo-PS were prepared via Grignard metathesis (GRIM) and atom transfer radical polymerisation, respectively. "Click" chemistry resulted in the preparation of poly(3-hexylthiophene)block- omega-bromo-polystyrene (P3HT-b-PS-Br), and subsequent atom transfer radical addition chemistry with fullerene (C-60) yielded the donor-acceptor block copolymer P3HT-b-PS-C-60. Both P3HT-b-PS-Br and P3HT-b-PS-C-60 were considered as compatibilizers with P3HT/PCBM blends, with the study detailing effects on active-layer morphology, device efficiency and stability. When used at low concentrations, both P3HT-b-PS-Br (1%) and P3HT-b-PS-C-60 (0.5%) resulted in considerable 28% and 35% increases in efficiencies with respect to devices made from P3HT/PCBM alone. Furthermore, P3HT-b-PS-C-60 (0.5%) resulted in an important improvement in device stability

Main-​chain poly(fullerene) multiblock copolymers as organic photovoltaic donor-​acceptors and stabilizers

A multi-​block copolymer based on main-​chain fullerene repeating units is used in org. photovoltaic devices for the first time. A poly(fullerene) (PFDP) is linked at the chain-​ends to poly(3-​hexylthiophene) (P3HT) to give poly[poly(3-​hexylthiophene)​-​block-​poly{([1,​4]​-​fullerene)​-​alt-​[1,​4-​dimethylene-​2,​5-​bis(cyclohexylmethyl ether)​phenylene]​}​] (P3HT-​b-​PFDP)​. While normal devices give poor results, inverted architectures result in near 50-​fold improvements in performances to a block copolymer efficiency of 2.8​% for this novel system. PFDP-​b-​P3HT is also employed as an additive to P3HT:PCBM bulk heterojunction devices and demonstrates increases from 3.6​% to 4.2​%, and remarkably gives a stable flat-​line efficiency over the time studied

Facile Synthesis and Proposed Mechanism of α,ω‐Oxetanyl-Telechelic Poly(3-nitratomethyl-3-methyl oxetane) by an S_N2(i) Nitrato Displacement Method in Basic Media

<p>The synthesis of a novel heterocyclic–telechelic polymer, α,ω-oxetanyl-telechelic poly(3-nitratomethyl-3-methyl oxetane), is described. Infrared spectroscopy (IR), gel permeation chromatography (GPC), and nuclear magnetic resonance (NMR) spectroscopy have been used to confirm the successful synthesis, demonstrating the presence of the telechelic-oxetanyl moieties. Synthesis of the terminal functionalities has been achieved via displacement of nitrato groups, in a manner similar to that employed with other leaving groups such as azido, bromo, and nitro, initiated by nucleophiles. In the present case, displacement occurs on the ends of a nitrato-functionalized polymer driven by the formation of sodium nitrate, which is supported by the polar aprotic solvent <i>N,N</i>-dimethyl formamide. The formation of an alkoxide at the polymer chain ends is favored and allows internal back-biting to the nearest carbon bearing the nitrato group, intrinsically in an S_N2(i) reaction, leading to α,ω-oxetanyl functionalization. The telechelic-oxetanyl moieties have the potential to be cross-linked by chemical (e.g., acidic) or radiative (e.g., ultraviolet) curing methods without the use of high temperatures, usually below 100°C. This type of material was designed for future use as a contraband simulant, whereby it would form the predominant constituent of elastomeric composites comprising rubbery polymer with small quantities of solids, typically crystals of contraband substances, such as explosives or narcotics. This method also provides an alternative approach to ring closure and synthesis of heterocycles.</p