Using CLIPS to represent knowledge in a VR simulation

Virtual reality (VR) is an exciting use of advanced hardware and software technologies to achieve an immersive simulation. Until recently, the majority of virtual environments were merely 'fly-throughs' in which a user could freely explore a 3-dimensional world or a visualized dataset. Now that the underlying technologies are reaching a level of maturity, programmers are seeking ways to increase the complexity and interactivity of immersive simulations. In most cases, interactivity in a virtual environment can be specified in the form 'whenever such-and-such happens to object X, it reacts in the following manner.' CLIPS and COOL provide a simple and elegant framework for representing this knowledge-base in an efficient manner that can be extended incrementally. The complexity of a detailed simulation becomes more manageable when the control flow is governed by CLIPS' rule-based inference engine as opposed to by traditional procedural mechanisms. Examples in this paper will illustrate an effective way to represent VR information in CLIPS, and to tie this knowledge base to the input and output C routines of a typical virtual environment

Qubits as spectrometers of dephasing noise

We present a procedure for direct characterization of the dephasing noise acting on a single qubit by making repeated measurements of the qubit coherence under suitably chosen sequences of controls. We show that this allows a numerical reconstruction of the short time noise correlation function and that it can be combined with a series of measurements under free evolution to allow a characterization of the noise correlation function over many orders of magnitude range in timescale. We also make an analysis of the robustness and reliability of the estimated correlation functions. Application to a simple model of two uncorrelated noise fluctuators using decoupling pulse sequences shows that the approach provides a useful route for experimental characterization of dephasing noise and its statistical properties in a variety of condensed phase and atomic systems.Comment: 10 pages, 3 figure

Pore space and brittle damage evolution in concrete

AbstractA novel lattice model is proposed for linking experimentally measured porosity of concrete to damage evolution and the emergent macroscopic behaviour. Pore sizes are resolved by X-ray CT and distributed at lattice bonds. The mechanical behaviour of bonds is elastic-brittle with failure criterion dependent on local forces and pore sizes. Bond failures provide the only non-linear effect on the macroscopic response. Results are compared to several experimental load cases. They show good agreement of stress–strain response at lower stress levels and expected differences at peak stresses. The framework allows for future development of models with plasticity and time-dependent effects

CO17 107. Experiencia inicial con la prótesis de válvula aórtica sin sutura 3f-enable de segunda generación

ObjetivosLa válvula aórtica ATS-3F-Enable™ representa una nueva generación con pericardio equino, stent de nitinol autoexpandible e implantación sin suturas. Evaluamos la técnica de implantación, la seguridad y efectividad de la válvula así como los resultados al año de implantación.Material y métodosAnálisis de resultados en una serie de 27 pacientes consecutivos con estenosis de válvula aórtica y reemplazamiento aislado de la válvula por una ATS-3F-Enable™ entre agosto de 2007 y febrero de 2009. La edad media fue 75,7±6,6 años. Diecisiete mujeres (63%). EuroSCORE mediano: 8, y medio: 7,1±1,7.ResultadosEl tamaño medio de válvula implantada fue de 23mm (franja: 19-27mm). La media de tiempo de clampaje aórtico fue de 39,8±15min (franja: 29-103min). La media de tiempo de circulación extracorpórea fue de 58,6±20min (franja: 41-127). La media de tiempo de hospitalización fue de 11 días (7-22). No hubo mortalidad durante la intervención. Al alta, los gradientes de presión transvalvular medio y alto con ecocardiografía fueron de 11,6 y 18,5mmHg, respectivamente. Dos pacientes presentaron una fuga paravalvular moderada y un paciente fue reoperado a causa de una fuga paravalvular grave. Se requirió la implantación de marcapasos en cinco pacientes (18,5%). El seguimiento al cabo de 1 año fue del 100% y la supervivencia fue del 86%.ConclusionesLa prótesis aórtica ATS-3F-Enable™ puede ser implantada con seguridad y presenta resultados hemodinámicos favorables. El stent autoexpandible y la técnica sin sutura permite una implantación rápida, sin embargo, no tan rápida como esperado. Acumulación de experiencia y algunas modificaciones en el diseño de la prótesis podrán ayudar a perfeccionar la técnica

The Effect of Sodium Hydroxide on Niobium Carbide Precipitates in Thermally Sensitised 20Cr-25Ni-Nb Austenitic Stainless Steel

Niobium-stabilised austenitic stainless steel (20Cr-25Ni-Nb) has been immersed in sodium hydroxide, which is used as a corrosion inhibitor. The work shows how NbC precipitates may be degraded by use of pH 13 NaOH. Initial electrochemical measurements indicate that there is no benefit to this pretreatment as regards long-term corrosion inhibition, and post corrosion imaging shows the initiation of pitting corrosion at Nb-rich precipitates still present in the microstructure

Cesium and Strontium Contamination of Nuclear Plant Stainless Steel : Implications for Decommissioning and Waste Minimization

Stainless steels can become contaminated with radionuclides at nuclear sites. Their disposal as radioactive waste would be costly. If the nature of steel contamination could be understood, effective decontamination strategies could be designed and implemented during nuclear site decommissioning in an effort to release the steels from regulatory control. Here, batch uptake experiments have been used to understand Sr and Cs (fission product radionuclides) uptake onto AISI Type 304 stainless steel under conditions representative of spent nuclear fuel storage (alkaline ponds) and PUREX nuclear fuel reprocessing (HNO3). Solution (ICP-MS) and surface measurements (GD-OES depth profiling, TOF-SIMS, and XPS) and kinetic modeling of Sr and Cs removal from solution were used to characterize their uptake onto the steel and define the chemical composition and structure of the passive layer formed on the steel surfaces. Under passivating conditions (when the steel was exposed to solutions representative of alkaline ponds and 3 and 6 M HNO3), Sr and Cs were maintained at the steel surface by sorption/selective incorporation into the Cr-rich passive film. In 12 M HNO3, corrosion and severe intergranular attack led to Sr diffusion into the passive layer and steel bulk. In HNO3, Sr and Cs accumulation was also commensurate with corrosion product (Fe and Cr) readsorption, and in the 12 M HNO3 system, XPS documented the presence of Sr and Cs chromates.Peer reviewe

Trajectories of university adjustment in the United Kingdom: Emotion management and emotional self-efficacy protect against initial poor adjustment

Little is known about individual differences in the pattern of university adjustment. This study explored longitudinal associations between emotional self-efficacy, emotion management, university adjustment, and academic achievement in a sample of first year undergraduates in the United Kingdom (N=331). Students completed measures of adjustment to university at three points during their first year at university. Latent Growth Mixture Modeling identified four trajectories of adjustment: (1) low, stable adjustment, (2) medium, stable adjustment, (3) high, stable adjustment, and (4) low, increasing adjustment. Membership of the low, stable adjustment group was predicted by low emotional self-efficacy and low emotion management scores, measured at entry into university. This group also had increased odds of poor academic achievement, even when grade at entry to university was controlled. Students who increased in adjustment had high levels of emotion management and emotional self-efficacy, which helped adaptation. These findings have implications for intervention