Capture-ejector satellites

A satellite in the form of a large rotating rim which can be used to boost spacecraft from low-Earth orbit to higher orbits is described. The rim rotates in the plane of its orbit such that the lower portion of the rim is traveling at suborbital velocity, while the upper portion is travelling at greater than orbital velocity. Ascending spacecraft or payloads arrive at the lowest portion of the rim at suborbital velocities, where the payloads are released on a trajectory for higher orbits; descending payloads employ the reverse procedure. Electric thrusters placed on the rim maintain rim rotational speed and altitude. From the standpoint of currently known materials, the capture-ejector concept may be useful for relatively small velocity increments

Bulletin No. 288 - Draingage and Irrigation, Soil, Economic, and Social Conditions, Delta Area, Utah Division 4: Social Conditions

This study is a part of a more comprehensive one which was organized in 1928 for the purpose of ascertaining what conditions existed in bonded irrigation and drainage districts which were unable to. liquidate obligations incurred. The first such area to be studied was the Delta Area in Millard County. This area was selected for this study because of the pressing need for more detailed and wider information than was available to either the farmers or the bondholders and because available facts based on careful study might aid in achieving fairer settlements. These data might also assist other areas in eliminating wastes which multiply in hastily planned undertakings

Electron Cloud Measurements in Fermilab Booster

Fermilab Booster synchrotron requires an intensity upgrade from 4.5x1012 to 6.5x1012 protons per pulse as a part of Fermilab's Proton Improvement Plan-II (PIP-II). One of the factors which may limit the high-intensity performance is the fast transverse instabilities caused by electron cloud effects. According to the experience in the Recycler, the electron cloud gradually builds up over multiple turns inside the combined function magnets and can reach final intensities orders of magnitude greater than in a pure dipole. Since the Booster synchrotron also incorporates combined function magnets, it is important to measure the presence of electron cloud. The presence or apparent absence of the electron cloud was investigated using two different methods: measuring bunch-by-bunch tune shift by changing the bunch train structure at different intensities and propagating a microwave carrier signal through the beampipe and analyzing the phase modulation of the signal. This paper presents the results of the two methods and corresponding simulation results conducted using PyECLOUD software.Comment: International Particle Accelerator Conference 202

Adaptive multi‐index collocation for uncertainty quantification and sensitivity analysis

Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/154316/1/nme6268.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/154316/2/NME_6268_novelty.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/154316/3/nme6268_am.pd

Energy-conserving physics for nonhydrostatic dynamics in mass coordinate models

Motivated by reducing errors in the energy budget related to enthalpy fluxes within the Energy Exascale Earth System Model (E3SM), we study several physics–dynamics coupling approaches. Using idealized physics, a moist rising bubble test case, and the E3SM's nonhydrostatic dynamical core, we consider unapproximated and approximated thermodynamics applied at constant pressure or constant volume. With the standard dynamics and physics time-split implementation, we describe how the constant-pressure and constant-volume approaches use different mechanisms to transform physics tendencies into dynamical motion and show that only the constant-volume approach is consistent with the underlying equations. Using time step convergence studies, we show that the two approaches both converge but to slightly different solutions. We reproduce the large inconsistencies between the energy flux internal to the model and the energy flux of precipitation when using approximate thermodynamics, which can only be removed by considering variable latent heats, both when computing the latent heating from phase change and when applying this heating to update the temperature. Finally, we show that in the nonhydrostatic case, for physics applied at constant pressure, the general relation that enthalpy is locally conserved no longer holds. In this case, the conserved quantity is enthalpy plus an additional term proportional to the difference between hydrostatic pressure and full pressure.</p

Growth factor restriction impedes progression of wound healing following cataract surgery: identification of VEGF as a putative therapeutic target

Secondary visual loss occurs in millions of patients due to a wound-healing response, known as posterior capsule opacification (PCO), following cataract surgery. An intraocular lens (IOL) is implanted into residual lens tissue, known as the capsular bag, following cataract removal. Standard IOLs allow the anterior and posterior capsules to become physically connected. This places pressure on the IOL and improves contact with the underlying posterior capsule. New open bag IOL designs separate the anterior capsule and posterior capsules and further reduce PCO incidence. It is hypothesised that this results from reduced cytokine availability due to greater irrigation of the bag. We therefore explored the role of growth factor restriction on PCO using human lens cell and tissue culture models. We demonstrate that cytokine dilution, by increasing medium volume, significantly reduced cell coverage in both closed and open capsular bag models. This coincided with reduced cell density and myofibroblast formation. A screen of 27 cytokines identified nine candidates whose expression profile correlated with growth. In particular, VEGF was found to regulate cell survival, growth and myofibroblast formation. VEGF provides a therapeutic target to further manage PCO development and will yield best results when used in conjunction with open bag IOL designs

Acoustic Investigation of Jet Mixing Noise in Dual Stream Nozzles

In an earlier study, a prediction model for jet noise in dual stream jets was proposed that is founded on velocity scaling laws in single stream jets and similarity features of the mean velocity and turbulent kinetic energy in dual stream flows. The model forms a composite spectrum from four component single-stream jets each believed to represent noise-generation from a distinct region in the actual flow. While the methodology worked effectively at conditions considered earlier, recent examination of acoustic data at some unconventional conditions indicate that further improvements are necessary in order to expand the range of applicability of the model. The present work demonstrates how these predictions compare with experimental data gathered by NASA and industry for the purpose of examining the aerodynamic and acoustic performance of such nozzles for a wide range of core and fan stream conditions. Of particular interest are jets with inverted velocity and temperature profiles and the appearance of a second spectral peak at small aft angles to the jet under such conditions. It is shown that a four-component spectrum succeeds in modeling the second peak when the aft angle refraction effects are properly incorporated into the model. A tradeoff of noise emission takes place between two turbulent regions identified as transition and fully mixed regions as the fan stream velocity exceeds that of the core stream. The effect of nozzle discharge coefficients will also be discussed

Locating mathematics within post-16 vocational education in England

The political importance of mathematics in post-16 education is clear. Far less clear is how mathematics does and should relate to vocational education. Successive mathematics curricula (e.g. core skills, key skills) have been developed in England with vocational learners in mind. Meanwhile, general mathematics qualifications remain largely disconnected from vocational learning. Following a brief historical survey of mathematics within vocational education, the paper presents findings from a nested case study of student groups in three large Further Education colleges in England. The primary unit of analysis herein is student groups learning Functional Mathematics in two vocational areas: construction and hairdressing. We show how approaches to organising teaching, developing connected curricula and classroom pedagogy tend to isolate or integrate mathematics from/with the vocational experience. Integrated approaches are shown to impact positively on student engagement and attitudes to learning mathematics. The paper concludes by discussing the potential impact of academic qualifications displacing vocationally relevant mathematics

A prospective analysis of robotic targeted MRI-US fusion prostate biopsy using the centroid targeting approach

Robotic prostate biopsy is an emerging technology. Recent development of this tool has allowed the performance of a transperineal prostate biopsy allowing pre-programmed standardized biopsy schemes. Prospective data collection was undertaken in 86 consecutive men who underwent robotically assisted transperineal prostate biopsy. All underwent a multi-parametric MRI pre-biopsy with centroid targeting followed by systematic template prostate biopsy. For the purposes of this study, our definition of clinically significant prostate cancer (csPCa) is any Gleason score > 6. Mean (SD) age, median (IQR) PSA, and median (IQR) prostate volume were 64.24 (6.97) years, of 7.79 ng/ml (6.5) and 45.06 cc (28), respectively. Overall, 44 (51.2%) men were diagnosed with csPCa. csPCa was detected in the targeted biopsies alone in 35 (40.1%) men. The addition of the 12-zone template biopsy increased the yield of csPCa for another 9 (10.5%) men. Of these 9 men, the majority (7) harbored primary pattern 3 disease and only 1 was identified to have high-grade disease. Out of these 9 men, 7 of them had the identification of csPCa in the sector, where a target was contained within that zone. Robotic-assisted prostate biopsy in our study has demonstrated a high detection of csPCa when combined with limited near-field sampling. Our study suggests the use of more accurate biopsy schemes such as ring-targeting of lesions to mitigate against systematic and random mathematical errors. Adoption of this tool and biopsy strategy would potentially avoid the increased morbidity associated with whole gland systematic unguided biopsies

An overview of research activities and achievement in Geotechnics from the Scottish Universities Geotechnics Network (SUGN)

ABSTRACT: Design of geotechnical systems is often challenging as it requires the understanding of complex soil behaviour and its influence on field-scale performance of geo-structures. To advance the scientific knowledge and the technological development in geotechnical engineering, a Scottish academic community, named Scottish Universities Geotechnics Network (SUGN), was established in 2001, composing of eight higher education institutions. The network gathers geotechnics researchers, including experimentalists as well as centrifuge, constitutive, and numerical modellers, to generate multiple synergies for building larger collaboration and wider research dissemination in and beyond Scotland. The paper will highlight the research excellence and leading work undertaken in SUGN emphasising some of the contribution to the geotechnical research community and some of the significant research outcomes. RÉSUMÉ: Conception de systèmes géotechniques est souvent difficile car elle nécessite la compréhension du comportement des sols complexes et son influence sur la performance échelle du champ de géo-structures. Pour faire avancer la connaissance scientifique et le développement technologique en ingénierie géotechnique, une communauté universitaire écossais, nommé écossais universités Géotechnique réseau (SUGN), a été créé en 2001, la composition des huit établissements d'enseignement supérieur. Le réseau réunit géotechnique chercheurs, y compris les expérimentateurs ainsi que centrifugeuse, constitutif, et les modélisateurs numériques, de générer des synergies multiples pour la construction de plus grande collaboration et une plus large diffusion de la recherche en Ecosse et au-delà. Le document mettra l'accent sur l'excellence de la recherche et de diriger le travail entrepris dans SUGN soulignant certains de la contribution à la communauté de recherche en géotechnique et certains des résultats importants de la recherche