A consensus model of political decision-making

In this paper, a model of political consensus is introduced. Parties try to reach consensus in forming a government. A government is defined as a pair consisting of a winning coalition and a policy supported by this coalition, where a policy consists of policies on given issues. A party evaluates all governments the party belongs to with respect to some criteria. We allow the criteria to be of unequal importance to a party. These criteria concern winning coalitions and policy issues. Parties may be advised to adjust their preferences, i.e., to change their evaluation concerning some government(s) or/and the importance of the criteria, in order to obtain a better political consensus.consensus reaching; consensus degree; government; coalition; policy

Consensus reaching in committees

In this paper, we apply a consensus model to decision-making in committees that have to choose one or more alternatives from a set of alternatives. The model does not use a voting rule nor a set of winning coalitions. Every decision maker evaluates each alternative with respect to given criteria. The criteria may be of unequal importance to a decision maker. Decision makers may be advised by a chairman to adjust their preferences, i.e., to change their evaluation of some alternative(s) or/and the importance of the criteria, in order to obtain a better consensus. The consensus result should satisfy constraints concerning the consensus degree and the ma jority degree. A simple example is presented.constraints satisfaction; consensus; committees

Preface Volume 66, Issue 5

AbstractThis part of the volume contains the papers accepted for presentation at the workshop on Unification in Non-Classical Logics (UNCL), co-located with ICALP 2002, which took place on July 12, 2002 in M\'alaga, Spain.The workshop was concerned with one of the most promising areas of research on non-classical logics and its applications. Unification in non-classical logics, with various approaches to handling generalised terms, has drawn more and more attention in recent years. So far, most popular lines of research include fuzzy unification of (conventional) databases and the use of fuzzy concepts in information retrieval.This workshop was conceived as a forum for the exchange of ideas relevant for the concept of unification in non-classical logics, including, but not limited to, the topics of: •Unification in multiple-valued and fuzzy logic programming.•Unification based on similarities and fuzzy equivalence relations.•Categorical unification.•Practical use of non-classical unification, e.g. in expert systems and information retrieval.The program committee selected six papers after a reviewing process in which each submitted paper received at least two reviews. Considerable effort was devoted for the evaluation of the submissions and to providing the authors with helpful feedback. The criteria for selection were originality, quality, and relevance to the topic of the workshop.Alsinet et al reviewed and compared two models which extend first order possibilistic logic in order to enable fuzzy unification. The extension considers mainly fuzzy constants, and in form of restrictions on existential quantifiers.Banerjee and Bujosa presented a non-classical interpretion of classical unification in terms of geometrical constructions over a suitable R-module M. The main result is that unification of two terms can be seen as the intersection of their corresponding affine varieties on M. This paves the way of using methods from computer algebra in the field of unification.In Eklund et al, substitutions and unifiers appear as constructs in Kleisli categories related to particular composed powerset term monads. It is shown that an often used similarity-based approach to fuzzy unification is compatible with the categorical approach, and can be adequately extended.Kutsia presented a unification procedure for a theory with individual and sequence variables, free fixed and flexible arity function symbols and patterns. These theories have been used in different contexts such as databases, rewriting, programming languages, or theorem proving.Medina et al introduced a formal model for similarity-based fuzzy unification in multi-adjoint logic programs. On this computational model, a similarity-based unification approach which provides a semantic framework for logic programming with different notions of similarity was constructed.Virtanen introduced unification in similarity-based logic programming. One of the crucial points is the definition of similarity degrees between sets, giving rise to [lambda]-interpretations. The selection of so called most significant terms again is one of the cornerstones of the paper.We would like to thank all those who submitted papers for consideration, the authors of accepted papers for their interesting discussions during the workshop, the additional referees for their careful work, and Inma Fortes from the local organising committee for her assistance

A consensus model of political decision-making

International audienceIn this paper, a model of political consensus is introduced. Parties try to reach consensus in forming a government. A government is defined as a pair consisting of a winning coalition and a policy supported by this coalition, where a policy consists of policies on given issues. A party evaluates all governments the party belongs to with respect to some criteria. We allow the criteria to be of unequal importance to a party. These criteria concern winning coalitions and policy issues. Parties may be advised to adjust their preferences, i.e., to change their evaluation concerning some government(s) or/and the importance of the criteria, in order to obtain a better political consensus

A class of completely regular spaces

In this paper we investigate topologies with ultrafilters having bases of open sets. It is shown that these topologies are completely regular. All results are obtained by using Richardson's compactification of convergence spaces. We also prove a non-existance of a dense convergence space compactification with lifting property

Validity, reliability, and responsiveness of daily monitoring visual analog scales in MASK-air®

Rinitis alérgica; Salud móvil; Escalas analógicas visualesRinitis al·lèrgica; Salut mòbil; Escales analògiques visualsAllergic rhinitis; Mobile health Visual analog scalesBackground MASK-air® is an app that supports allergic rhinitis patients in disease control. Users register daily allergy symptoms and their impact on activities using visual analog scales (VASs). We aimed to assess the concurrent validity, reliability, and responsiveness of these daily VASs. Methods Daily monitoring VAS data were assessed in MASK-air® users with allergic rhinitis. Concurrent validity was assessed by correlating daily VAS values with those of the EuroQol-5 Dimensions (EQ-5D) VAS, the Control of Allergic Rhinitis and Asthma Test (CARAT) score, and the Work Productivity and Activity Impairment Allergic Specific (WPAI-AS) Questionnaire (work and activity impairment scores). Intra-rater reliability was assessed in users providing multiple daily VASs within the same day. Test–retest reliability was tested in clinically stable users, as defined by the EQ-5D VAS, CARAT, or “VAS Work” (i.e., VAS assessing the impact of allergy on work). Responsiveness was determined in users with two consecutive measurements of EQ-5D-VAS or “VAS Work” indicating clinical change. Results A total of 17,780 MASK-air® users, with 317,176 VAS days, were assessed. Concurrent validity was moderate–high (Spearman correlation coefficient range: 0.437–0.716). Intra-rater reliability intraclass correlation coefficients (ICCs) ranged between 0.870 (VAS assessing global allergy symptoms) and 0.937 (VAS assessing allergy symptoms on sleep). Test–retest reliability ICCs ranged between 0.604 and 0.878—“VAS Work” and “VAS asthma” presented the highest ICCs. Moderate/large responsiveness effect sizes were observed—the sleep VAS was associated with lower responsiveness, while the global allergy symptoms VAS demonstrated higher responsiveness. Conclusion In MASK-air®, daily monitoring VASs have high intra-rater reliability and moderate–high validity, reliability, and responsiveness, pointing to a reliable measure of symptom loads.The study was funded by ARIA. Open access funding enabled and organized by Projekt DEAL

Fate of Antioxidative Compounds within Bark during Storage: A Case of Norway Spruce Logs

Softwood bark is an important by-product of forest industry. Currently, bark is under-utilized and mainly directed for energy production, although it can be extracted with hot water to obtain compounds for value-added use. In Norway spruce (Picea abies [L.] Karst.) bark, condensed tannins and stilbene glycosides are among the compounds that comprise majority of the antioxidative extractives. For developing feasible production chain for softwood bark extractives, knowledge on raw material quality is critical. This study examined the fate of spruce bark tannins and stilbenes during storage treatment with two seasonal replications (i.e., during winter and summer). In the experiment, mature logs were harvested and stored outside. During six-month-storage periods, samples were periodically collected for chemical analysis from both inner and outer bark layers. Additionally, bark extractives were analyzed for antioxidative activities by FRAP, ORAC, and H2O2 scavenging assays. According to the results, stilbenes rapidly degraded during storage, whereas tannins were more stable: only 5–7% of the original stilbene amount and ca. 30–50% of the original amount of condensed tannins were found after 24-week-storage. Summer conditions led to the faster modification of bark chemistry than winter conditions. Changes in antioxidative activity were less pronounced than those of analyzed chemical compounds, indicating that the derivatives of the compounds contribute to the antioxidative activity. The results of the assays showed that, on average, ca. 27% of the original antioxidative capacity remained 24 weeks after the onset of the storage treatment, while a large variation (2–95% of the original capacity remaining) was found between assays, seasons, and bark layers. Inner bark preserved its activities longer than outer bark, and intact bark attached to timber is expected to maintain its activities longer than a debarked one. Thus, to ensure prolonged quality, no debarking before storage is suggested: outer bark protects the inner bark, and debarking enhances the degradation

Fate of Antioxidative Compounds within Bark during Storage: A Case of Norway Spruce Logs

Softwood bark is an important by-product of forest industry. Currently, bark is under-utilized and mainly directed for energy production, although it can be extracted with hot water to obtain compounds for value-added use. In Norway spruce (Picea abies [L.] Karst.) bark, condensed tannins and stilbene glycosides are among the compounds that comprise majority of the antioxidative extractives. For developing feasible production chain for softwood bark extractives, knowledge on raw material quality is critical. This study examined the fate of spruce bark tannins and stilbenes during storage treatment with two seasonal replications (i.e., during winter and summer). In the experiment, mature logs were harvested and stored outside. During six-month-storage periods, samples were periodically collected for chemical analysis from both inner and outer bark layers. Additionally, bark extractives were analyzed for antioxidative activities by FRAP, ORAC, and H2O2 scavenging assays. According to the results, stilbenes rapidly degraded during storage, whereas tannins were more stable: only 5–7% of the original stilbene amount and ca. 30–50% of the original amount of condensed tannins were found after 24-week-storage. Summer conditions led to the faster modification of bark chemistry than winter conditions. Changes in antioxidative activity were less pronounced than those of analyzed chemical compounds, indicating that the derivatives of the compounds contribute to the antioxidative activity. The results of the assays showed that, on average, ca. 27% of the original antioxidative capacity remained 24 weeks after the onset of the storage treatment, while a large variation (2–95% of the original capacity remaining) was found between assays, seasons, and bark layers. Inner bark preserved its activities longer than outer bark, and intact bark attached to timber is expected to maintain its activities longer than a debarked one. Thus, to ensure prolonged quality, no debarking before storage is suggested: outer bark protects the inner bark, and debarking enhances the degradation

A selective de-O-methylation of guaiacyl lignans to corresponding catechol derivatives by 2-iodoxybenzoic acid (IBX). The role of the catechol moiety on the toxicity of lignans

We report here the first selective de-O-methylation of a large panel of guaiacyl lignans to the corresponding catechol derivatives by using IBX as primary oxidant under green conditions (dimethyl carbonate-H 2 O solvent) through an in situ reduction procedure. The influence of the catechol moiety on the cytotoxicity and genotoxicity of new lignan derivatives has been investigated. The results obtained indicated that the presence of the catechol moiety sharply enhances the clastogenic potential (e.g. induction of chromosomal aberrations), the cytotoxicity and the modulation of cell cycle progression with respect to the parent compounds. Thus, despite the in vitro antioxidant activity usually described for catechol derivatives, our results show for the first time the generation of a clastogenic potential, highly indicative of a long-term genetic and cancer risk

Synthesis and Characterization of Metal Modified Catalysts for Decomposition of Ibuprofen from Aqueous Solutions

The presence of pharmaceuticals in surface water, drinking water, and wastewater has attracted significant concern because of the non-biodegradability, resistance, and toxicity of pharmaceutical compounds. The catalytic ozonation of an anti-inflammatory pharmaceutical, ibuprofen was investigated in this work. The reaction mixture was analyzed and measured by high-performance liquid chromatography (HPLC). Liquid chromatography-mass spectrometry (LC-MS) was used for the quantification of by-products during the catalytic ozonation process. Ibuprofen was degraded by ozonation under optimized conditions within 1 h. However, some intermediate oxidation products were detected during the ibuprofen ozonation process that were more resistant than the parent compound. To optimize the process, nine heterogeneous catalysts were synthesized using different preparation methods and used with ozone to degrade the ibuprofen dissolved in aqueous solution. The aim of using several catalysts was to reveal the effect of various catalyst preparation methods on the degradation of ibuprofen as well as the formation and elimination of by-products. Furthermore, the goal was to reveal the influence of various support structures and different metals such as Pd-, Fe-, Ni-, metal particle size, and metal dispersion in ozone degradation. Most of the catalysts improved the elimination kinetics of the by-products. Among these catalysts, Cu-H-Beta-150-DP synthesized by the deposition-precipitation process showed the highest decomposition rate. The regenerated Cu-H-Beta-150-DP catalyst preserved the catalytic activity to that of the fresh catalyst. The catalyst characterization methods applied in this work included nitrogen adsorption-desorption, scanning electron microscopy, transmission electron microscopy, and Fourier-transform infrared spectroscopy. The large pore volume and small metal particle size contributed to the improved catalytic activity