3,464 research outputs found

    Myocardial fiber length mapping with MR diffusion tensor imaging

    Get PDF
    Diffusion tensor MRI is emerging as a rapid, nondestructive method to map myocardial fiber organization. A precise biological description of myocardial fiber performance requires knowledge of four variables: length, force, velocity and time. However, study of quantification of myocardial fiber length is lacking. The current study aims to show myocardial fiber length maps of formalin-fixed heats. Diffusion tensor MRI with medium diffusion resolution (15 directions) was performed in one isolated pig heart. Fiber length maps were investigated in multiple short-axis slices. The results provide supplementary information of myocardial fiber organization. To our knowledge, the present study is the first report of the myocardial fiber length mapping. © 2005 IEEE.published_or_final_versio

    Comparison of Mutation Patterns in Full-Genome A/H3N2 Influenza Sequences Obtained Directly from Clinical Samples and the Same Samples after a Single MDCK Passage

    Get PDF
    Human influenza viruses can be isolated efficiently from clinical samples using Madin-Darby canine kidney (MDCK) cells. However, this process is known to induce mutations in the virus as it adapts to this non-human cell-line. We performed a systematic study to record the pattern of MDCK-induced mutations observed across the whole influenza A/H3N2 genome. Seventy-seven clinical samples collected from 2009-2011 were included in the study. Two full influenza genomes were obtained for each sample: one from virus obtained directly from the clinical sample and one from the matching isolate cultured in MDCK cells. Comparison of the full-genome sequences obtained from each of these sources showed that 42% of the 77 isolates had acquired at least one MDCK-induced mutation. The presence or absence of these mutations was independent of viral load or sample origin (in-patients versus out-patients). Notably, all the five hemagglutinin missense mutations were observed at the hemaggutinin 1 domain only, particularly within or proximal to the receptor binding sites and antigenic site of the virus. Furthermore, 23% of the 77 isolates had undergone a MDCK-induced missense mutation, D151G/N, in the neuraminidase segment. This mutation has been found to be associated with reduced drug sensitivity towards the neuraminidase inhibitors and increased viral receptor binding efficiency to host cells. In contrast, none of the neuraminidase sequences obtained directly from the clinical samples contained the D151G/N mutation, suggesting that this mutation may be an indicator of MDCK culture-induced changes. These D151 mutations can confound the interpretation of the hemagglutination inhibition assay and neuraminidase inhibitor resistance results when these are based on MDCK isolates. Such isolates are currently in routine use in the WHO influenza vaccine and drug-resistance surveillance programs. Potential data interpretation miscalls can therefore be avoided by careful exclusion of such D151 mutants after further sequence analysis.published_or_final_versio

    Study of myocardial fiber length distribution with diffusion tensor MRI

    Get PDF
    Diffusion tensor MRI (DTI) is a nondestructive method to map myocardial fiber organization. Many studies have been done on myocardial fiber orientation. However, cardiac contraction is also related with myocardial fiber length, but its study is limited so far. The current study aims to provide information of myocardial fiber length distribution in formalin-fixed porcine heart samples. DTI with medium diffusion resolution (15 directions) was performed. Fiber length distribution as a function of fiber helix angle was investigated in multiple short-axis slices located from base to apex of the left ventricles. Results show that longer fibers likely run circumferentially, and fibers located at middle and upper ventricle are generally longer than those near apex. The results provide supplementary structural information on myocardial fiber architecture and cardiac mechanics.published_or_final_versio

    Design of a pulse power supply unit for micro-ECM

    Get PDF
    Electrochemical micro-machining (μECM) requires a particular pulse power supply unit (PSU) to be developed in order to achieve desired machining performance. This paper summarises the development of a pulse PSU meeting the requirements of μECM. The pulse power supply provides tens of nanosecond pulse duration, positive and negative bias voltages and a polarity switching functionality. It fulfils the needs for tool preparation with reversed pulsed ECM on the machine. Moreover, the PSU is equipped with an ultrafast overcurrent protection which prevents the tool electrode from being damaged in case of short circuits. The developed pulse PSU was used to fabricate micro-tools out of 170 μm WC-Co alloy shafts via micro-electrochemical turning and drill deep holes via μECM in a disk made of 18NiCr6. The electrolyte used for both processes was a mixture of sulphuric acid and NaNO3 aqueous solutions.The research reported in this paper is supported by the European Commission within the project “Minimizing Defects in Micro-Manufacturing Applications (MIDEMMA)” (FP7-2011-NMP-ICT-FoF-285614

    Mapping of Mycobacterium tuberculosis Complex Genetic Diversity Profiles in Tanzania and Other African Countries

    Get PDF
    The aim of this study was to assess and characterize Mycobacterium tuberculosis complex (MTBC) genotypic diversity in Tanzania, as well as in neighbouring East and other several African countries. We used spoligotyping to identify a total of 293 M. tuberculosis clinical isolates (one isolate per patient) collected in the Bunda, Dar es Salaam, Ngorongoro and Serengeti areas in Tanzania. The results were compared with results in the SITVIT2 international database of the Pasteur Institute of Guadeloupe. Genotyping and phylogeographical analyses highlighted the predominance of the CAS, T, EAI, and LAM MTBC lineages in Tanzania. The three most frequent Spoligotype International Types (SITs) were: SIT21/CAS1-Kili (n = 76; 25.94%), SIT59/LAM11-ZWE (n = 22; 7.51%), and SIT126/EAI5 tentatively reclassified as EAI3-TZA (n = 18; 6.14%). Furthermore, three SITs were newly created in this study (SIT4056/EAI5 n = 2, SIT4057/T1 n = 1, and SIT4058/EAI5 n = 1). We noted that the East-African-Indian (EAI) lineage was more predominant in Bunda, the Manu lineage was more common among strains isolated in Ngorongoro, and the Central-Asian (CAS) lineage was more predominant in Dar es Salaam (p-value<0.0001). No statistically significant differences were noted when comparing HIV status of patients vs. major lineages (p-value = 0.103). However, when grouping lineages as Principal Genetic Groups (PGG), we noticed that PGG2/3 group (Haarlem, LAM, S, T, and X) was more associated with HIV-positive patients as compared to PGG1 group (Beijing, CAS, EAI, and Manu) (p-value = 0.03). This study provided mapping of MTBC genetic diversity in Tanzania (containing information on isolates from different cities) and neighbouring East African and other several African countries highlighting differences as regards to MTBC genotypic distribution between Tanzania and other African countries. This work also allowed underlining of spoligotyping patterns tentatively grouped within the newly designated EAI3-TZA lineage (remarkable by absence of spacers 2 and 3, and represented by SIT126) which seems to be specific to Tanzania. However, further genotyping information would be needed to confirm this specificity

    Pleosporales

    Get PDF
    One hundred and five generic types of Pleosporales are described and illustrated. A brief introduction and detailed history with short notes on morphology, molecular phylogeny as well as a general conclusion of each genus are provided. For those genera where the type or a representative specimen is unavailable, a brief note is given. Altogether 174 genera of Pleosporales are treated. Phaeotrichaceae as well as Kriegeriella, Zeuctomorpha and Muroia are excluded from Pleosporales. Based on the multigene phylogenetic analysis, the suborder Massarineae is emended to accommodate five families, viz. Lentitheciaceae, Massarinaceae, Montagnulaceae, Morosphaeriaceae and Trematosphaeriaceae

    Guanylyl cyclase activity associated with putative bifunctional integral membrane proteins in Plasmodium falciparum.

    Get PDF
    We report here that guanylyl cyclase activity is associated with two large integral membrane proteins (PfGCalpha and PfGCbeta) in the human malaria parasite Plasmodium falciparum. Unusually, the proteins appear to be bifunctional; their amino-terminal regions have strong similarity with P-type ATPases, and the sequence and structure of the carboxyl-terminal regions conform to that of G protein-dependent adenylyl cyclases, with two sets of six transmembrane sequences, each followed by a catalytic domain (C1 and C2). However, amino acids that are enzymatically important and present in the C2 domain of mammalian adenylyl cyclases are located in the C1 domain of the P. falciparum proteins and vice versa. In addition, certain key residues in these domains are more characteristic of guanylyl cyclases. Consistent with this, guanylyl cyclase activity was obtained following expression of the catalytic domains of PfGCbeta in Escherichia coli. In P. falciparum, expression of both genes was detectable in the sexual but not the asexual blood stages of the life cycle, and PfGCalpha was localized to the parasite/parasitophorous vacuole membrane region of gametocytes. The profound structural differences identified between mammalian and parasite guanylyl cyclases suggest that aspects of this signaling pathway may be mechanistically distinct

    A transcriptomic snapshot of early molecular communication between Pasteuria penetrans and Meloidogyne incognita

    Get PDF
    © The Author(s). 2018Background: Southern root-knot nematode Meloidogyne incognita (Kofoid and White, 1919), Chitwood, 1949 is a key pest of agricultural crops. Pasteuria penetrans is a hyperparasitic bacterium capable of suppressing the nematode reproduction, and represents a typical coevolved pathogen-hyperparasite system. Attachment of Pasteuria endospores to the cuticle of second-stage nematode juveniles is the first and pivotal step in the bacterial infection. RNA-Seq was used to understand the early transcriptional response of the root-knot nematode at 8 h post Pasteuria endospore attachment. Results: A total of 52,485 transcripts were assembled from the high quality (HQ) reads, out of which 582 transcripts were found differentially expressed in the Pasteuria endospore encumbered J2 s, of which 229 were up-regulated and 353 were down-regulated. Pasteuria infection caused a suppression of the protein synthesis machinery of the nematode. Several of the differentially expressed transcripts were putatively involved in nematode innate immunity, signaling, stress responses, endospore attachment process and post-attachment behavioral modification of the juveniles. The expression profiles of fifteen selected transcripts were validated to be true by the qRT PCR. RNAi based silencing of transcripts coding for fructose bisphosphate aldolase and glucosyl transferase caused a reduction in endospore attachment as compared to the controls, whereas, silencing of aspartic protease and ubiquitin coding transcripts resulted in higher incidence of endospore attachment on the nematode cuticle. Conclusions: Here we provide evidence of an early transcriptional response by the nematode upon infection by Pasteuria prior to root invasion. We found that adhesion of Pasteuria endospores to the cuticle induced a down-regulated protein response in the nematode. In addition, we show that fructose bisphosphate aldolase, glucosyl transferase, aspartic protease and ubiquitin coding transcripts are involved in modulating the endospore attachment on the nematode cuticle. Our results add new and significant information to the existing knowledge on early molecular interaction between M. incognita and P. penetrans.Peer reviewedFinal Published versio

    Electron quantum metamaterials in van der Waals heterostructures

    Full text link
    In recent decades, scientists have developed the means to engineer synthetic periodic arrays with feature sizes below the wavelength of light. When such features are appropriately structured, electromagnetic radiation can be manipulated in unusual ways, resulting in optical metamaterials whose function is directly controlled through nanoscale structure. Nature, too, has adopted such techniques -- for example in the unique coloring of butterfly wings -- to manipulate photons as they propagate through nanoscale periodic assemblies. In this Perspective, we highlight the intriguing potential of designer sub-electron wavelength (as well as wavelength-scale) structuring of electronic matter, which affords a new range of synthetic quantum metamaterials with unconventional responses. Driven by experimental developments in stacking atomically layered heterostructures -- e.g., mechanical pick-up/transfer assembly -- atomic scale registrations and structures can be readily tuned over distances smaller than characteristic electronic length-scales (such as electron wavelength, screening length, and electron mean free path). Yet electronic metamaterials promise far richer categories of behavior than those found in conventional optical metamaterial technologies. This is because unlike photons that scarcely interact with each other, electrons in subwavelength structured metamaterials are charged, and strongly interact. As a result, an enormous variety of emergent phenomena can be expected, and radically new classes of interacting quantum metamaterials designed

    Aberration-corrected electron microscopy of nanoparticles

    Get PDF
    The early history of scanning transmission electron microscopy (STEM) is reviewed as a way to frame the technical issues that make aberration correction an essential upgrade for the study of nanoparticles using STEM. The principles of aberration correction are explained, and the use of aberration-corrected microscopy in the study of nanostructures is exemplified in order to remark the features and challenges in the use of this measuring techniqu
    corecore