1,060 research outputs found

    Coordination between Bradyrhizobium and Pseudomonas alleviates salt stress in soybean through altering root system architecture

    Get PDF
    It is a well accepted strategy to improve plant salt tolerance through inoculation with beneficial microorganisms. However, its underlying mechanisms still remain unclear. In the present study, hydroponic experiments were conducted to evaluate the effects of Bradyrhizobium japonicum USDA 110 with salt-tolerant Pseudomonas putida TSAU1 on growth, protein content, nitrogen, and phosphorus uptake as well as root system architecture of soybean (Glycine max L.) under salt stress. The results indicated that the combined inoculation with USDA 110 and TSAU1 significantly improved plant growth, nitrogen and phosphorus contents, and contents of soluble leaf proteins under salt stress compared to the inoculation with the symbiont alone or compared to un-inoculated ones. The root architectural traits, like root length, surface area, project area, and root volume; as well as nodulation traits were also significantly increased by co-inoculation with USDA 110 and TSAU1. The plant-growth promoting rhizobacteria (PGPR) P. putida strain TSAU1 could improve the symbiotic interaction between the salt-stressed soybean and B. japonicum USDA 110. In conclusion, inoculation with B. japonicum and salt-tolerant P. putida synergistically improved soybean salt tolerance through altering root system architecture facilitating nitrogen and phosphorus acquisition, and nodule formation.Peer reviewe

    Bioassay-guided isolation and identification of antimicrobial compounds from thyme essential oil by means of overpressured layer chromatography, bioautography and GC-MS

    Get PDF
    A simple method is described for efficient isolation of compounds having an antibacterial effect. Two thyme (Thymus vulgaris) essential oils, obtained from the market, were chosen as prospective materials likely to feature several bioactive components when examined by thin layer chromatography coupled with direct bioautography as a screening method. The newly developed infusion overpressured layer chromatographic separation method coupled with direct bioautography assured that only the active components were isolated by means of overrun overpressured layer chromatography with online detection and fractionation. Each of the 5 collected fractions represented one of the five antimicrobial essential oil components designated at the screening. The purity and the activity of the fractions were confirmed with chromatography coupled various detection methods (UV, vanillin-sulphuric acid reagent, direct bioautography). The antibacterial components were identified with GC-MS as thymol, carvacrol, linalool, diethylphthalate, and alpha-terpineol. The oil component diethyl-phthalate is an artificial compound, used as plasticizer or detergent bases in the industry. Our results support that exploiting its flexibility and the possible hyphenations, overpressured layer chromatography is especially attractive for isolation of antimicrobial components from various matrixes

    Dental Care Utilization and Satisfaction of Residential University Students

    Get PDF
    Aim: The objective of this study was to provide information on the level of utilization and satisfaction of residential university students with the dental services provided by the dental clinic of a teaching hospital. Volunteers and Material: A stratified sampling technique was used to recruit volunteers from the outpatient clinic of the Obafemi Awolowo University Teaching Hospital Complex, Ile-Ife, Nigeria. Information was collected by a self-administered questionnaire composed of questions that measure the level of utilization and satisfaction with the dental services provided. Questionnaires were provided to 650 randomly chosen students residing in the University hostels. There were 39 refusals, and 6 incomplete questionnaires were discarded. This left a sample size of 605 volunteers. Results: Forty seven students (7.8%) indicated that they visited the dental hospital within the last 12 months. Males and females utilized the dental services equally, and utilization increased with age and the number of years spent on campus. Anticipation of painful dental treatment, high dental charges, long waiting times and being too busy for a dental visit were cited as the most important impediments to seeking dental treatment. Females expressed greater satisfaction with the services. Conclusion: Dental service utilization among the students was found to be low. Oral health awareness campaigns, improving the quality of the services, and shortening the waiting time are expected to increase service utilization and satisfaction. Keywords: dental care, utilization, satisfaction, young adults, Nigeria Libyan Journal of Medicine Vol. 3 (3) 2008: pp. 20-2

    Coexistence of the topological state and a two-dimensional electron gas on the surface of Bi2Se3

    Full text link
    Topological insulators are a recently discovered class of materials with fascinating properties: While the inside of the solid is insulating, fundamental symmetry considerations require the surfaces to be metallic. The metallic surface states show an unconventional spin texture, electron dynamics and stability. Recently, surfaces with only a single Dirac cone dispersion have received particular attention. These are predicted to play host to a number of novel physical phenomena such as Majorana fermions, magnetic monopoles and unconventional superconductivity. Such effects will mostly occur when the topological surface state lies in close proximity to a magnetic or electric field, a (superconducting) metal, or if the material is in a confined geometry. Here we show that a band bending near to the surface of the topological insulator Bi2_2Se3_3 gives rise to the formation of a two-dimensional electron gas (2DEG). The 2DEG, renowned from semiconductor surfaces and interfaces where it forms the basis of the integer and fractional quantum Hall effects, two-dimensional superconductivity, and a plethora of practical applications, coexists with the topological surface state in Bi2_2Se3_3. This leads to the unique situation where a topological and a non-topological, easily tunable and potentially superconducting, metallic state are confined to the same region of space.Comment: 12 pages, 3 figure

    Silencing cortical activity during sound-localization training impairs auditory perceptual learning

    Get PDF
    The brain has a remarkable capacity to adapt to changes in sensory inputs and to learn from experience. However, the neural circuits responsible for this flexible processing remain poorly understood. Using optogenetic silencing of ArchT-expressing neurons in adult ferrets, we show that within-trial activity in primary auditory cortex (A1) is required for training-dependent recovery in sound-localization accuracy following monaural deprivation. Because localization accuracy under normal-hearing conditions was unaffected, this highlights a specific role for cortical activity in learning. A1-dependent plasticity appears to leave a memory trace that can be retrieved, facilitating adaptation during a second period of monaural deprivation. However, in ferrets in which learning was initially disrupted by perturbing A1 activity, subsequent optogenetic suppression during training no longer affected localization accuracy when one ear was occluded. After the initial learning phase, the reweighting of spatial cues that primarily underpins this plasticity may therefore occur in A1 target neurons

    A runaway collision in a young star cluster as the origin of the brightest supernova

    Full text link
    Supernova 2006gy in the galaxy NGC 1260 is the most luminous one recorded \cite{2006CBET..644....1Q, 2006CBET..647....1H, 2006CBET..648....1P, 2006CBET..695....1F}. Its progenitor might have been a very massive (>100>100 \msun) star \cite{2006astro.ph.12617S}, but that is incompatible with hydrogen in the spectrum of the supernova, because stars >40>40 \msun are believed to have shed their hydrogen envelopes several hundred thousand years before the explosion \cite{2005A&A...429..581M}. Alternatively, the progenitor might have arisen from the merger of two massive stars \cite{2007ApJ...659L..13O}. Here we show that the collision frequency of massive stars in a dense and young cluster (of the kind to be expected near the center of a galaxy) is sufficient to provide a reasonable chance that SN 2006gy resulted from such a bombardment. If this is the correct explanation, then we predict that when the supernova fades (in a year or so) a dense cluster of massive stars becomes visible at the site of the explosion

    Gac two-component system in Pseudomonas syringae pv. tabaci is required for virulence but not for hypersensitive reaction

    Get PDF
    Pseudomonas syringae pv. tabaci 6605 causes wildfire disease on host tobacco plants. To investigate the regulatory mechanism of the expression of virulence, Gac two-Component system-defective mutants, Delta gacA and Delta gacS, and a double mutant, Delta gacA Delta gacS, were generated. These mutants produced smaller amounts of N-acyl homoserine lactones required for quorum sensing, had lost swarming motility, and had reduced expression of virulence-related hrp genes and the algT gene required for exopolysaccharide production. The ability of the mutants to cause disease symptoms in their host tobacco plant was remarkably reduced, while they retained the ability to induce hypersensitive reaction (HR) in the nonhost plants. These results indicated that the Gac two-component system of P. syringae pv. tabaci 6605 is indispensable for virulence on the host plant, but not for HR induction in the nonhost plants.</p

    Using laser ultrasound to detect sub-surface defects in metal laser powder bed fusion components

    Get PDF
    Laser powder bed fusion offers many advantages over conventional manufacturing methods, such as the integration of multiple parts which can result in significant weight-savings. The increased design freedom that layer-wise manufacture allows has also been seen to enhance component performance at little or no added cost. However, for such benefits to be realised, the material quality must first be assured. Laser ultrasonic testing is a non-contact inspection technique which has been proposed as suitable for in-situ monitoring of metal additive manufacturing processes. This paper explores the current capability of this technique to detect manufactured, sub-surface defects in Ti-6Al-4V samples, ex-situ. The results are compared with x-ray computed tomography reconstructions and focus variation microscopy. Whilst laser ultrasound has been used to identify material discontinuities, further work is required before this technique could be implemented in-situ

    A novel, simple, and sensitive colorimetric method to determine aromatic amino acid aminotransferase activity using the Salkowski reagent

    Get PDF
    This study describes the development of a new colorimetric assay to determine aromatic amino acid aminotransferase (ArAT) activity. The assay is based on the transamination of l-tryptophan in the presence of 2-oxoglutarate, which yields indole-3-pyruvate (IPyA). The amount of IPyA formed was quantified by reaction with the Salkowski reagent. Optimized assay conditions are presented for ArAT isozymes isolated from Pseudomonas putida. For comparative purposes, ArAT activity was also determined by high-performance liquid chromatography. ArAT activity staining in polyacrylamide gels with the Salkowski reagent is also presented
    corecore