205 research outputs found
Multicomponent bionanocomposites based on clay nanoarchitectures for electrochemical devices
Based on the unique ability of defibrillated sepiolite (SEP) to form stable and homogeneous colloidal dispersions of diverse types of nanoparticles in aqueous media under ultrasonication, multicomponent conductive nanoarchitectured materials integrating halloysite nanotubes (HNTs), graphene nanoplatelets (GNPs) and chitosan (CHI) have been developed. The resulting nanohybrid suspensions could be easily formed into films or foams, where each individual component plays a critical role in the biocomposite: HNTs act as nanocontainers for bioactive species, GNPs provide electrical conductivity (enhanced by doping with MWCNTs) and, the CHI polymer matrix introduces mechanical and membrane properties that are of key significance for the development of electrochemical devices. The resulting characteristics allow for a possible application of these active elements as integrated multicomponent materials for advanced electrochemical devices such as biosensors and enzymatic biofuel cells. This strategy can be regarded as an "a la carte" menu, where the selection of the nanocomponents exhibiting different properties will determine a functional set of predetermined utility with SEP maintaining stable colloidal dispersions of different nanoparticles and polymers in water
Magnetic and electronic properties of bimagnetic materials comprising cobalt particles within hollow silica decorated with magnetite nanoparticles
Bimagnetic materials were fabricated by decorating the external surface of rattle-type hollow silica microspheres (which themselves contain metallic cobalt nanoparticles) with magnetite nanoparticles; thus, each magnetic substance was spatially isolated by the silica shell. The amount of magnetite decoration on the co-occluded hollow silica was varied from 1 to 17 mass %. Magnetic and electronic properties of the resulting bimagnetic materials were characterized by superconducting quantum interference device measurements and X-ray absorption spectroscopy, respectively. The ferrous iron in the bimagnetic sample was slightly more oxidized than in the magnetite reference, probably from some charge-transfer because of the SiO2 surface contact, although the overall oxidation state of the samples is very similar to that of magnetite. The temperature dependence of the sample magnetization recorded with Zero Field Cooling and Field Cooling resulted in blocking temperatures for the bimagnetic materials that were close to that of magnetite nanoparticles (176K) and were lower than that for the bare Co-occluded hollow silica (which was above room temperature). Values of coercive force and exchange bias at 300K became quite small after decoration with only minimal amounts of magnetite nanoparticles (1-3 mass %) and were lower than those of magnetite. This is the first example of enhancing superparamagnetism by spatial separation of both Co and magnetite magnetic nanoparticles using a thin wall of diamagnetic silica.ArticleJOURNAL OF APPLIED PHYSICS. 114(12):124304 (2013)journal articl
Biomaterials from beer manufacture waste for bone growth scaffolds
Agricultural wastes are a source of renewable raw materials (RRM), with structures that can be tailored for the use envisaged. Here, they have proved to be good replacement candidates for use as biomaterials for the growth of osteoblasts in bone replacement therapies. Their preparation is more cost effective than that of materials presently in use with the added bonus of converting a low-cost waste into a value-added product. Due to their origin these solids are ecomaterials. In this study, several techniques, including X-ray diffraction (XRD), chemical analysis, mercury intrusion porosimetry (MIP), scanning electron microscopy (SEM), and bioassays, were used to compare the biocompatibility and cell growth of scaffolds produced from beer bagasse, a waste material from beer production, with a control sample used in bone and dental regenerative processes
Confinement of a Nonionic Surfactant Membrane Within a Montmorillonite as a New Way to Prepare Organoclay Materials
Design, development and characterization of a nanomagnetic system based on iron oxide nanoparticles encapsulated in PLLA-nanospheres
Biocomposite films based on κ-carrageenan/locust bean gum blends and clays : physical and antimicrobial properties
The aims of this work were to evaluate the physical and antimicrobial properties of biodegradable films composed of mixtures of κ-carrageenan (κ-car) and locust bean gum (LBG) when organically modified clay Cloisite 30B (C30B) was dispersed in the biopolymer matrix. Film-forming solutions were prepared by adding C30B (ranging from 0 to 16 wt.%) into the κ-car/LBG solution (40/60 wt.%) with 0.3 % (w/v) of glycerol. Barrier properties (water vapour permeability, P vapour; CO2 and O2 permeabilities), mechanical properties (tensile strength, TS, and elongation-at-break, EB) and thermal stability of the resulting films were determined and related with the incorporation of C30B. Also, X-ray diffraction (XRD) was done in order to investigate the effect of C30B in film structure. Antimicrobial effects of these films against Listeria monocytogenes, Escherichia coli and Salmonella enterica were also evaluated. The increase of clay concentration causes a decrease of P vapour (from 5.34 × 10−11 to 3.19 × 10−11 g (m s Pa)−1) and an increase of the CO2 permeability (from 2.26 × 10−14 to 2.91 × 10−14 g (m s Pa)−1) and did not changed significantly the O2 permeability for films with 0 and 16 wt.% C30B, respectively. Films with 16 wt.% clay exhibited the highest values of TS (33.82 MPa) and EB (29.82 %). XRD patterns of the films indicated that a degree of exfoliation is attained depending on clay concentration. κ-car/LBG–C30B films exhibited an inhibitory effect only against L. monocytogenes. κ-car/LBG–C30B composite films are a promising alternative to synthetic films in order to improve the shelf life and safety of food products.J. T. Martins, A. I. Bourbon, A. C. Pinheiro and M. A. Cerqueira gratefully acknowledge the Fundacao para a Ciencia e Tecnologia (FCT, Portugal) for their fellowships (SFRH/BD/32566/2006, SFRH/BD/73178/2010, SFRH/BD/48120/2008 and SFRH/BPD/72753/2010, respectively), and B. W. S. Souza acknowledges the Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior (CAPES, Brazil)
Influence of Anodic Conditions on Self-ordered Growth of Highly Aligned Titanium Oxide Nanopores
Self-aligned nanoporous TiO2templates synthesized via dc current electrochemical anodization have been carefully analyzed. The influence of environmental temperature during the anodization, ranging from 2 °C to ambient, on the structure and morphology of the nanoporous oxide formation has been investigated, as well as that of the HF electrolyte chemical composition, its concentration and their mixtures with other acids employed for the anodization. Arrays of self-assembled titania nanopores with inner pores diameter ranging between 50 and 100 nm, wall thickness around 20–60 nm and 300 nm in length, are grown in amorphous phase, vertical to the Ti substrate, parallel aligned to each other and uniformly disordering distributed over all the sample surface. Additional remarks about the photoluminiscence properties of the titania nanoporous templates and the magnetic behavior of the Ni filled nanoporous semiconductor Ti oxide template are also included
Magnetic and electronic properties of bimagnetic materials comprising cobalt particles within hollow silica decorated with magnetite nanoparticles
Bimagnetic materials were fabricated by decorating the external surface of rattle-type hollow silica microspheres (which themselves contain metallic cobalt nanoparticles) with magnetite nanoparticles; thus, each magnetic substance was spatially isolated by the silica shell. The amount of magnetite decoration on the co-occluded hollow silica was varied from 1 to 17 mass %. Magnetic and electronic properties of the resulting bimagnetic materials were characterized by superconducting quantum interference device measurements and X-ray absorption spectroscopy, respectively. The ferrous iron in the bimagnetic sample was slightly more oxidized than in the magnetite reference, probably from some charge-transfer because of the SiO2 surface contact, although the overall oxidation state of the samples is very similar to that of magnetite. The temperature dependence of the sample magnetization recorded with Zero Field Cooling and Field Cooling resulted in blocking temperatures for the bimagnetic materials that were close to that of magnetite nanoparticles (176K) and were lower than that for the bare Co-occluded hollow silica (which was above room temperature). Values of coercive force and exchange bias at 300K became quite small after decoration with only minimal amounts of magnetite nanoparticles (1-3 mass %) and were lower than those of magnetite. This is the first example of enhancing superparamagnetism by spatial separation of both Co and magnetite magnetic nanoparticles using a thin wall of diamagnetic silica.ArticleJOURNAL OF APPLIED PHYSICS. 114(12):124304 (2013)journal articl
Nanoarchitectures Based on Layered Titanosilicates Supported on Glass Fibers: Application to Hydrogen Storage
- …