Kinetic Theory of Transient Condensation and Evaporation at a Plane Surface

The phenomenon of transient condensation onto, or evaporation from, a liquid sheet in contact with its pure vapor is treated from a kinetic theory viewpoint. The Maxwell moment method is used to formulate the detailed transient problem. A steady surface mass flux rate exists for times large in comparison with the collision time, that is, in the continuum regime, and explicit formulas are given for this limit. The complete gasdynamic field, however, is nonsteady for all times. The calculations are carried out utilizing four moments, and the effects of incorporating additional moments are negligible. Finally, the analysis is extended to incorporate imperfect mass and temperature accommodation. Examination of the transient solution and a matched asymptotic "quasisteady" solution shows that the gasdynamic field consists of a diffusion process near the liquid surface coupled through an expansion or compression wave to the constant far field state

The BCS Critical Temperature in a Weak External Electric Field via a Linear Two-Body Operator

We study the critical temperature of a superconductive material in a weak external electric potential via a linear approximation of the BCS functional. We reproduce a similar result as in Frank et al. (Commun Math Phys 342(1):189–216, 2016, [5]) using the strategy introduced in Frank et al. (The BCS critical temperature in a weak homogeneous magnetic field, [2]), where we considered the case of an external constant magnetic field

The BCS critical temperature in a weak external electric field via a linear two-body operator

We study the critical temperature of a superconductive material in a weak external electric potential via a linear approximation of the BCS functional. We reproduce a similar result as in [Frank, Hainzl, Seiringer, Solovej, 2016] using the strategy introduced in [Frank, Hainzl, Langmann, 2018], where we considered the case of an external constant magnetic field.Comment: Dedicated to Herbert Spohn on the occasion of his seventieth birthday; 29 page

A practical experience with independent verification and validation

One approach to reducing software cost and increasing reliability is the use of an independent verification and validation (IV & V) methodology. The Software Engineering Laboratory (SEL) applied the IV & V methodology to two medium-size flight dynamics software development projects. Then, to measure the effectiveness of the IV & V approach, the SEL compared these two projects with two similar past projects, using measures like productivity, reliability, and maintain ablilty. Results indicated that the use of the IV & V methodology did not help the overall process nor improve the product in these cases

Criteria for software modularization

A central issue in programming practice involves determining the appropriate size and information content of a software module. This study attempted to determine the effectiveness of two widely used criteria for software modularization, strength and size, in reducing fault rate and development cost. Data from 453 FORTRAN modules developed by professional programmers were analyzed. The results indicated that module strength is a good criterion with respect to fault rate, whereas arbitrary module size limitations inhibit programmer productivity. This analysis is a first step toward defining empirically based standards for software modularization

Transport properties of a turbulent lorentz gas technical report no. a-33

Transport properties of turbulent Lorentz gas with average magnetic fiel

²¹⁰Pb- ²²⁶Ra chronology reveals rapid growth rate of Madrepora oculata and Lophelia pertusa on world's largest cold-water coral reef

Here we show the use of the 210Pb- 226Ra excess method to determine the growth rate of two corals from the world's largest known cold-water coral reef, Røst Reef, north of the Arctic circle off Norway. Colonies of each of the two species that build the reef, Lophelia pertusa and Madrepora oculata, were collected alive at 350 m depth using a submersible. Pb and Ra isotopes were measured along the major growth axis of both specimens using low level alpha and gamma spectrometry and trace element compositions were studied. 210Pb and 226Ra differ in the way they are incorporated into coral skeletons. Hence, to assess growth rates, we considered the exponential decrease of initially incorporated 210Pb, as well as the increase in 210Pb from the decay of 226Ra and contamination with 210Pb associated with Mn-Fe coatings that we were unable to remove completely from the oldest parts of the skeletons. 226Ra activity was similar in both coral species, so, assuming constant uptake of 210Pb through time, we used the 210Pb- 226Ra chronology to calculate growth rates. The 45.5 cm long branch of M. oculata was 31 yr with an average linear growth rate of 14.4 ± 1.1 mm yr -1 (2.6 polyps per year). Despite cleaning, a correction for Mn-Fe oxide contamination was required for the oldest part of the colony; this correction corroborated our radiocarbon date of 40 yr and a mean growth rate of 2 polyps yr -1. This rate is similar to the one obtained in aquarium experiments under optimal growth conditions. For the 80 cm-long L. pertusa colony, metal-oxide contamination remained in both the middle and basal part of the coral skeleton despite cleaning, inhibiting similar age and growth rate estimates. The youngest part of the colony was free of metal oxides and this 15 cm section had an estimated a growth rate of 8 mm yr -1, with high uncertainty (∼1 polyp every two to three years). We are less certain of this 210Pb growth rate estimate which is within the lowermost ranges of previous growth rate estimates. We show that 210Pb- 226Ra dating can be successfully applied to determine the age and growth rate of framework-forming cold-water corals if Mn-Fe oxide deposits can be removed. Where metal oxides can be removed, large M. oculata and L. pertusa skeletons provide archives for studies of intermediate water masses with an up to annual time resolution and spanning over many decades. © 2012 Author(s)

A computer simulation of the turbocharged turbo compounded diesel engine system: A description of the thermodynamic and heat transfer models

A computer simulation of the turbocharged turbocompounded direct-injection diesel engine system was developed in order to study the performance characteristics of the total system as major design parameters and materials are varied. Quasi-steady flow models of the compressor, turbines, manifolds, intercooler, and ducting are coupled with a multicylinder reciprocator diesel model, where each cylinder undergoes the same thermodynamic cycle. The master cylinder model describes the reciprocator intake, compression, combustion and exhaust processes in sufficient detail to define the mass and energy transfers in each subsystem of the total engine system. Appropriate thermal loading models relate the heat flow through critical system components to material properties and design details. From this information, the simulation predicts the performance gains, and assesses the system design trade-offs which would result from the introduction of selected heat transfer reduction materials in key system components, over a range of operating conditions

Buoyant Venus station mission feasibility study for 1972 and 1973 launch opportunities. Volume 1 - Mission summary definition and comparison Final report

Mission planning, scheduling, and costs for 1972 and 1973 buoyant Venus station missio