Model Development of Afterschool Programs in Cyberspace for Third grade Students of Guidance School

This research studies the design of a model of afterschool programs in cyberspace for third grade students of guidance school in 2012-2013 school year in Tehran City. For this purpose, the main parameters of the model were identified and their interrelations were studied, in order to identify the determining needs and major parameters of afterschool programs in cyberspace. A researcher-made questionnaire has been used for the students and a semi-structured interview for the principals, teachers and other educational staff. The data collected from the questionnaires and the interviews were processed and analyzed by SPSS and AMOS. Thus the conceptual model "after school programs in cyberspace " was confirmed. According to the needs analysis that was performed, the parameters of the after school programs in cyberspace were divided into two exogenous parameters of knowledge and skill and seven endogenous parameters of individual-social features, gaining knowledge extracurricular use, accessibility to information and sources, leisure, place of after school programs, and network features. Finally, the results indicated that the two parameters of individual –social features and place of after school programs in having the most direct and indirect effects on the model of after school programs in cyberspace. Further, in addition to identifying the major parameters of afterschool programs and studying the amount of effects of each of them. The causes and necessity of such programs were studied according to the qualitative and quantitative results

Temperature-dependent proximity magnetism in Pt

We experimentally demonstrate the existence of magnetic coupling between two ferromagnets separated by a thin Pt layer. The coupling remains ferromagnetic regardless of the Pt thickness, and exhibits a significant dependence on temperature. Therefore, it cannot be explained by the established mechanisms of magnetic coupling across nonmagnetic spacers. We show that the experimental results are consistent with the presence of magnetism induced in Pt in proximity to ferromagnets, in direct analogy to the well-known proximity effects in superconductivity.Comment: 4 pages, 3 figure

Variability in gene cassette patterns of class 1 and 2 integrons associated with multi drug resistance patterns in Staphylococcus aureus clinical isolates in Tehran-Iran

Background: To investigate antibiotic resistance, the occurrence and distribution of class 1 and 2 integrons in multidrug- resistant Staphylococcus aureus isolates from hospitals in Tehran, Iran. The isolates were examined for susceptibility to antimicrobial agents. The mecA gene, class 1 and 2 integrons were detected by PCR. Integrase positive strains were further analysed for the presence of resistance gene cassettes using specific primers and were sequenced. Results: Among 139S.aureus isolates, 109 (78.4 ) and 112 (80.5 ) strains were considered as multidrug resistant and mecA positive, respectively. Class 1 integrons and internal variable regions were found in 72.6 (101/139) and 97 (98/101) and class 2 integrons and variable regions also in 35.2 (49/139) and 65.3 (32/49) of S.aureus clinical isolates, respectively. Twelve distinct cassette arrays were found, containing genes encoding resistance to β-lactams, aminoglycosides, streptothricin, trimethoprim, chloramphenicol,a putative glucose dehydrogenase precursor and a protein with unknown function. Gene cassette arrays aadB, aadA2 and dhfrA1-sat2-aadA1 were common in S.aureus isolates. We detected a completely new gene cassettes which contained aadB, oxa2, aacA4, orfD-aacA4-catB8, aadB-catB3, orfD-aacA4 and aadB-aadA1-cmlA6 of class 1 and dhfrA1-sat2-aadA1, dhfrA11, dhfrA1-sat2 of class 2 integrons. Conclusions: This is the first study to report carriage of class 1 and 2 integrons and associated gene cassettes among in S.aureus isolates from Iran. © 2015 Mostafa et al

Health, Health-Related Quality of Life, and Quality of Life: What is the Difference?

The terms health, health-related quality of life (HRQoL), and quality of life (QoL) are used interchangeably. Given that these are three key terms in the literature, their appropriate and clear use is important. This paper reviews the history and definitions of the terms and considers how they have been used. It is argued that the definitions of HRQoL in the literature are problematic because some definitions fail to distinguish between HRQoL and health or between HRQoL and QoL. Many so-called HRQoL questionnaires actually measure self-perceived health status and the use of the phrase QoL is unjustified. It is concluded that the concept of HRQoL as used now is confusing. A potential solution is to define HRQoL as the way health is empirically estimated to affect QoL or use the term to only signify the utility associated with a health state

Yb-fiber-laser-based, 1.8 W average power, picosecond ultraviolet source at 266 nm

We report a compact, stable, high-power, picosecond ultraviolet (UV) source at 266 nm based on simple single-pass two-step fourth-harmonic generation (FHG) of a mode-locked Yb-fiber laser at 79.5 MHz in LiB3O5 (LBO) and β-BaB2O4. Using a 30-mm-long LBO crystal for single-pass second-harmonic generation, we achieve up to 9.1 W of average green power at 532 nm for 16.8 W of Yb-fiber power at a conversion efficiency of 54% in 16.2 ps pulses with a TEM00 spatial profile and passive power stability better than 0.5% rms over 16 h. The generated green radiation is then used for single-pass FHG into the UV, providing as much as 1.8 W of average power at 266 nm under the optimum focusing condition in the presence of spatial walk-off, at an overall FHG conversion efficiency of ∼11%. The generated UV output exhibits passive power stability better than 4.6% rms over 1.5 h and beam pointing stability better than 84 μrad over 1 h. The UV output beam has a circularity of >80% in high beam quality with the TEM00 mode profile. To the best of our knowledge, this is the first report of picosecond UV generation at 266 nm at megahertz repetition rates.Peer ReviewedPostprint (published version

Yb-fiber-laser-based, 1.8 W average power, picosecond ultraviolet source at 266 nm

We report a compact, stable, high-power, picosecond ultraviolet (UV) source at 266 nm based on simple single-pass two-step fourth-harmonic generation (FHG) of a mode-locked Yb-fiber laser at 79.5 MHz in LiB3O5 (LBO) and β-BaB2O4. Using a 30-mm-long LBO crystal for single-pass second-harmonic generation, we achieve up to 9.1 W of average green power at 532 nm for 16.8 W of Yb-fiber power at a conversion efficiency of 54% in 16.2 ps pulses with a TEM00 spatial profile and passive power stability better than 0.5% rms over 16 h. The generated green radiation is then used for single-pass FHG into the UV, providing as much as 1.8 W of average power at 266 nm under the optimum focusing condition in the presence of spatial walk-off, at an overall FHG conversion efficiency of ∼11%. The generated UV output exhibits passive power stability better than 4.6% rms over 1.5 h and beam pointing stability better than 84 μrad over 1 h. The UV output beam has a circularity of >80% in high beam quality with the TEM00 mode profile. To the best of our knowledge, this is the first report of picosecond UV generation at 266 nm at megahertz repetition rates.Peer Reviewe

Non-phosgene route to unsymmetrical ureas from N-Cbz-α-amino acid amides

A convenient method toward the synthesis of α-amino acid-derived unsymmetrical ureas 2 is described herein. This route involves an interesting rearrangement of amides of N-Cbz-α-amino acids 1, which presumably entails the intermediacy of hydantoins that is followed by hydrolysis to afford unsymmetrical ureas 2 in quantitative yields and high purity. © 2013 Elsevier Ltd. All rights reserved

Yb-fiber-laser-based, 1.8 W average power, picosecond ultraviolet source at 266 nm

We report a compact, stable, high-power, picosecond ultraviolet (UV) source at 266 nm based on simple single-pass two-step fourth-harmonic generation (FHG) of a mode-locked Yb-fiber laser at 79.5 MHz in LiB3O5 (LBO) and β-BaB2O4. Using a 30-mm-long LBO crystal for single-pass second-harmonic generation, we achieve up to 9.1 W of average green power at 532 nm for 16.8 W of Yb-fiber power at a conversion efficiency of 54% in 16.2 ps pulses with a TEM00 spatial profile and passive power stability better than 0.5% rms over 16 h. The generated green radiation is then used for single-pass FHG into the UV, providing as much as 1.8 W of average power at 266 nm under the optimum focusing condition in the presence of spatial walk-off, at an overall FHG conversion efficiency of ∼11%. The generated UV output exhibits passive power stability better than 4.6% rms over 1.5 h and beam pointing stability better than 84 μrad over 1 h. The UV output beam has a circularity of >80% in high beam quality with the TEM00 mode profile. To the best of our knowledge, this is the first report of picosecond UV generation at 266 nm at megahertz repetition rates.Peer Reviewe

Non-Phosgene Route To Unsymmetrical Ureas From N-Cbz-Α-Amino Acid Amides

A convenient method toward the synthesis of α-amino acid-derived unsymmetrical ureas 2 is described herein. This route involves an interesting rearrangement of amides of N-Cbz-α-amino acids 1, which presumably entails the intermediacy of hydantoins that is followed by hydrolysis to afford unsymmetrical ureas 2 in quantitative yields and high purity. © 2013 Elsevier Ltd. All rights reserved