Nonmarine Ostracoda as proxies in (geo-)archaeology: a review

Abstract Ostracods as bioindicators are extremely useful for reconstructing palaeoenvironment and palaeoclimate and can also indicate the provenance of sediments and materials, for example, in studies on ancient commercial networks. Ostracods are small crustaceans that live in almost all aquatic habitats, both natural and man-made. Due to their calcitic carapace, they have high fossilization potential, and their use in geoarchaeology has been steadily increasing during the last decades. Their small size needs mean that only small volumes of sediment samples are needed, and species-specific ecological tolerances and preferences allow detailed palaeoenvironmental reconstructions. Typical methods of their application are palaeoecological analyses of associations based on ecological information and taphonomy, morphometric variability and stable isotope and chemistry analyses of their shells. The present paper aims to present an overview of applications of non-marine ostracods in (geo-)archaeological research, recommending sampling and analytical techniques for addressing archaeological research questions on palaeoclimate, habitat and landscape changes, water availability and quality, land use and other anthropogenic impacts, the provenance of materials and commercial networks to promote the application of Ostracoda in geoarchaeology/environmental archaeology.1 Introduction 2 Applications 2.1 short history of ostracod‐based palaeoenvironmental reconstructions 2.2 Palaeoclimate and palaeoenvironmental studies on continental archaeological sites 2.2.1 General palaeoenvironment/landscape reconstructions 2.2.2 Salinity 2.2.3 Temperature 2.2.4 Radiocarbon dating 2.3 Landscape changes by human activity 2.4 Water use and water works 2.5 Provenance studies 3 Methods for sampling and lab analyses 4 Conclusion

The Influence of Specimen Thickness on the High Temperature Corrosion Behavior of CMSX-4 during Thermal-Cycling Exposure

CMSX-4 is a single-crystalline Ni-base superalloy designed to be used at very high temperatures and high mechanical loadings. Its excellent corrosion resistance is due to external alumina-scale formation, which however can become less protective under thermal-cycling conditions. The metallic substrate in combination with its superficial oxide scale has to be considered as a composite suffering high stresses. Factors like different coefficients of thermal expansion between oxide and substrate during temperature changes or growing stresses affect the integrity of the oxide scale. This must also be strongly influenced by the thickness of the oxide scale and the substrate as well as the ability to relief such stresses, e.g., by creep deformation. In order to quantify these effects, thin-walled specimens of different thickness (t = 100500 lm) were prepared. Discontinuous measurements of their mass changes were carried out under thermal-cycling conditions at a hot dwell temperature of 1100 C up to 300 thermal cycles. Thin-walled specimens revealed a much lower oxide-spallation rate compared to thick-walled specimens, while thinwalled specimens might show a premature depletion of scale-forming elements. In order to determine which of these competetive factor is more detrimental in terms of a component’s lifetime, the degradation by internal precipitation was studied using scanning electron microscopy (SEM) in combination with energy-dispersive X-ray spectroscopy (EDS). Additionally, a recently developed statistical spallation model was applied to experimental data [D. Poquillon and D. Monceau, Oxidation of Metals, 59, 409–431 (2003)]. The model describes the overall mass change by oxide scale spallation during thermal cycling exposure and is a useful simulation tool for oxide scale spallation processes accounting for variations in the specimen geometry. The evolution of the net-mass change vs. the number of thermal cycles seems to be strongly dependent on the sample thickness

Carbon Nanotube Terahertz Polarizer

We describe a film of highly-aligned single-walled carbon nanotubes that acts as an excellent terahertz linear polarizer. There is virtually no attenuation (strong absorption) when the terahertz polarization is perpendicular (parallel) to the nanotube axis. From the data we calculated the reduced linear dichrosim to be 3, corresponding to a nematic order parameter of 1, which demonstrates nearly perfect alignment as well as intrinsically anisotropic terahertz response of single-walled carbon nanotubes in the film.Comment: 13 pages, 3 figure

Polarization dependence of coherent phonon generation and detection in highly-aligned single-walled carbon nanotubes

We have investigated the polarization dependence of the generation and detection of radial breathing mode (RBM) coherent phonons (CP) in highly-aligned single-walled carbon nanotubes. Using polarization-dependent pump-probe differential-transmission spectroscopy, we measured RBM CPs as a function of angle for two different geometries. In Type I geometry, the pump and probe polarizations were fixed, and the sample orientation was rotated, whereas, in Type II geometry, the probe polarization and sample orientation were fixed, and the pump polarization was rotated. In both geometries, we observed a very nearly complete quenching of the RBM CPs when the pump polarization was perpendicular to the nanotubes. For both Type I and II geometries, we have developed a microscopic theoretical model to simulate CP generation and detection as a function of polarization angle and found that the CP signal decreases as the angle goes from 0 degrees (parallel to the tube) to 90 degrees (perpendicular to the tube). We compare theory with experiment in detail for RBM CPs created by pumping at the E44 optical transition in an ensemble of single-walled carbon nanotubes with a diameter distribution centered around 3 nm, taking into account realistic band structure and imperfect nanotube alignment in the sample

Security governance and networks: New theoretical perspectives in transatlantic security

The end of the Cold War has not only witnessed the rise of new transnational threats such as terrorism, crime, proliferation and civil war; it has also seen the growing role of non-state actors in the provision of security in Europe and North America. Two concepts in particular have been used to describe these transformations: security governance and networks. However, the differences and potential theoretical utility of these two concepts for the study of contemporary security have so far been under-examined. This article seeks to address this gap. It proposes that security governance can help to explain the transformation of Cold War security structures, whereas network analysis is particularly useful for understanding the relations and interactions between public and private actors in the making and implementation of national and international security policies

Effect of water vapor on the spallation of thermal barrier coating systems during laboratory cyclic oxidation testing.

The effect of water and water vapor on the lifetime of Ni-based superalloy samples coated with a typical thermal barrier coating system—b-(Ni,Pt)Al bond coat and yttria stabilized zirconia (YSZ) top coat deposited by electron beam physical vapor deposition (EB-PVD) was studied. Samples were thermally cycled to 1,150 C and subjected to a water-drop test in order to elucidate the effect of water vapor on thermal barrier coating (TBC) spallation. It was shown that the addition of water promotes spallation of TBC samples after a given number of cycles at 1,150 C. This threshold was found to be equal to 170 cycles for the present system. Systems based on b-NiAl bond coat or on Pt-rich c/c0 bond coat were also sensitive to the water-drop test. Moreover, it was shown that water vapor in ambient air after minutes or hours at room temperature, promotes also TBC spallation once the critical number of cycles has been reached. This desktop spalling (DTS) can be prevented by locking up the cycled samples in a dry atmosphere box. These results for TBC systems confirm and document Smialek’s theory about DTS and moisture induced delayed spalling (MIDS) being the same phenomenon. Finally, the mechanisms implying hydrogen embrittlement or surface tension modifications are discussed

Substrate Effect on the High Temperature Oxidation Behavior of a Pt-modified Aluminide Coating. Part II: Long-term Cyclic-oxidation Tests at 1,050 C

This second part of a two-part study is devoted to the effect of the substrate on the long-term, cyclic-oxidation behavior at 1,050 C of RT22 industrial coating deposited on three Ni-base superalloys (CMSX-4, SCB, and IN792). Cyclicoxidation tests at 1,050 C were performed for up to 58 cycles of 300 h (i.e., 17,400 h of heating at 1,050 C). For such test conditions, interdiffusion between the coating and its substrate plays a larger role in the damage process of the system than during isothermal tests at 900, 1,050, and 1,150 C for 100 h and cyclicoxidation tests at 900 C which were reported in part I [N. Vialas and D. Monceau, Oxidation of Metals 66, 155 (2006)]. The results reported in the present paper show that interdiffusion has an important effect on long-term, cyclic-oxidation resistance, so that clear differences can be observed between different superalloys protected with the same aluminide coating. Net-mass-change (NMC) curves show the better cyclic-oxidation behavior of the RT22/IN792 system whereas uncoated CMSX-4 has the best cyclic-oxidation resistance among the three superalloys studied. The importance of the interactions between the superalloy substrate and its coating is then demonstrated. The effect of the substrate on cyclic-oxidation behavior is related to the extent of oxide scale spalling and to the evolution of microstructural features of the coatings tested. SEM examinations of coating surfaces and cross sections show that spalling on RT22/CMSX-4 and RT22/SCB was favored by the presence of deep voids localized at the coating/oxide interface. Some of these voids can act as nucleation sites for scale spallation. The formation of such interfacial voids was always observed when the b to c0 transformation leads to the formation of a two-phase b/c0 layer in contact with the alumina scale. On the contrary, no voids were observed in RT22/IN792, since this b to c0 transformation occurs gradually by an inward transformation of b leading to the formation of a continuous layer of c0 phase, parallel to the metal/scale interface

Compressive Creep Performance and High Temperature Dimensional Stability of Conventional Silica Refractories

Furnace designers and refractory engineers recognize that optimized furnace superstructure design and refractory selection are needed as glass production furnaces are continually striving toward greater output and efficiencies. Harsher operating conditions test refractories to the limit, while changing production technology (such as the conversion to oxy-fuel from traditional air-fuel firing) can alter the way the materials perform. Refractories for both oxy- and air-fuel fired furnace superstructures are subjected to high temperatures during service that may cause them to excessively creep or subside if the refractory material is not creep resistant, or if it is subjected to high stress, or both. Furnace designers can ensure that superstructure structural integrity is maintained if the creep behavior of the refractory material is well understood and well represented by appropriate engineering creep models. Several issues limit the abilities of furnace designers to (1) choose the optimum refractory for their applications, (2) optimize the engineering design, or (3) predict the service mechanical integrity of their furnace superstructures. Published engineering creep data are essentially non-existent for almost all commercially available refractories used for glass furnace superstructures. The limited data that do exist are supplied by the various refractory suppliers. Unfortunately, these suppliers generally have different ways of conducting their mechanical testing and they also interpret and report their data differently; this makes it hard for furnace designers to draw fair comparisons between competing grades of candidate refractories. Furthermore, the refractory supplier's data are often not available in a form that can be readily used for furnace design and for the prediction and design of long-term structural integrity of furnace superstructures. With the aim of providing such comparable data, the US DOE's Office of Industrial Technology and its Advanced Industrial Materials program is sponsoring work to conduct creep testing and analysis on refractories of interest to the glass industry. An earlier stage of the project involved identifying which refractories to test and this is described elsewhere. Conventional silica was one such identified refractory category, and the present report describes the creep behavior of this class of refractories. To portray a more complete understanding of how these refractories perform at service temperatures, their fundamental corrosion resistances, dimensional stabilities, and microstructure were characterized as well

Mechanical and microstructural characterization of MCrAlY coatings produced by laser cladding: The influence of the Ni, Co and Al content

[EN] Laser metal deposition (LMD) and laser cladding (LC) are alternative methods to thermal spraying processes to produce dense, high-quality coatings. In this work, two MCrAlY coatings (M=Ni+Co) have been prepared onto stainless steel substrate using a coaxial LC technique under two different Ni/Co and Al proportions. The mechanical properties were then evaluated with microhardness, nanoindentation, and three-point bending tests. The microstructure and composition of coatings were characterized by X-ray Diffraction (XRD) analysis and Field Emission Electron Microscopy (FESEM) coupled to an Energy Dispersive Spectroscopy (EDS) detector. The study revealed that the ¿/ß phases formed in the MCrAlY coating microstructure result in a lower elastic modulus than the austenitic stainless steel substrate, while an inverse behavior for hardness was observed due the presence of the aluminum-rich ß-phase. Under flexural loads, the failure of coatings showed plasticity and anisotropy characteristics depending on the two laser tracks orientations evaluated.The authors would like to acknowledge the financial support of the Ministry of Science and Innovation of the Government of Spain through research project MAT2011-28492-C03, and the support of the Generalitat Valenciana through ACOMP/2013/114Pereira, JC.; Zambrano, JC.; Rayón, E.; Yañez, A.; Amigó, V. (2018). Mechanical and microstructural characterization of MCrAlY coatings produced by laser cladding: The influence of the Ni, Co and Al content. Surface and Coatings Technology. 338:22-31. https://doi.org/10.1016/j.surfcoat.2018.01.073S223133