1,163 research outputs found
Gradient boosting models for photovoltaic power estimation under partial shadingĀ conditions
The energy yield estimation of a photovoltaic (PV) system operating under partially shaded conditions is a challenging task and a very active area of research. In this paper, we attack this problem with the aid of machine learning techniques. Using data simulated by the equivalent circuit of a PV string operating under partial shading, we train and evaluate three different gradient boosted regression tree models to predict the global maximum power point (MPP). Our results show that all three approaches improve upon the state-of-the-art closed-form estimates, in terms of both average and worst-case performance. Moreover, we show that even a small number of training examples is sufficient to achieve improved global MPP estimation. The methods proposed are fast to train and deploy and allow for further improvements in performance should more computational resources be available
10301 Executive Summary and Abstracts Collection -- Service Value Networks
From 25.07.2010 to 30.07.2010, the Perspectives Workshop 10301
``Perspectives Workshop: Service Value Networks \u27\u27 was held
in Schloss Dagstuhl~--~Leibniz Center for Informatics.
During the seminar, several participants presented their current
research, and ongoing work and open problems were discussed. Abstracts of
the presentations given during the seminar as well as abstracts of
seminar results and ideas are put together in this paper. The first section
describes the seminar topics and goals in general.
Links to extended abstracts or full papers are provided, if available
Prevention of fish photobacteriosis. Comparison of the efficacy of intraperitoneally administered commercial and experimental vaccines
Two commercial multivalent vaccines against vibriosis, caused by Vibrio anguillarum serotype(s) and photobacteriosis, caused by Photobacterium damsela subsp. piscicida, one with oil adjuvant (AJ) and the other,being an aqueous solution (AV), and an experimental monovalent (Ph. damselae subsp. piscicida) vaccine inactivated with formalin or heat, namely EVF and EVH, were tested in laboratory trials on sea bass (Dicentrarchus labrax) in respect to their efficacy against experimentally induced photobacteriosis. The first trial aiming at high bacterial pressure was carried out 34 days post-vaccination and resulted in 90% mortalities in the control. The relative per cent survival (RPS) of vaccinated fish was calculated at 24, 3.7, 0 and 0 for the AJ, AV, EVF and EVH formulations, respectively. The second trial aiming at medium bacterial pressure was carried out 49 days post-vaccination and resulted in 45% mortalities in the control. The relative per cent survival (RPS) of vaccinated fish was calculated at 100, 92.7, 77.8 and 66.7 for the AJ, EVF, EVH and AV, formulations, respectively. Apparently, under both these high and medium bacterial pressure conditions, the commercial vaccine AJ performed better than the commercial vaccine AV, while under medium pressure there was no statistical difference between the performance of EVF and AJ. The measurement of specific antibody titers in sera collected from all fish groups 49 days post-vaccination, showed high levels in the fish vaccinated with the AJ vaccine, almost three times lower levels for the AV and EVF vaccines and even lower levels for the EVH vaccine. Results are discussed in respect to the choices mariculture companies have in selecting a commercial vaccine against photobacteriosis and possible alternatives, which, if commercially developed, may reduce vaccine cost
Neurotrophin-3 and FLT3 Tyrosine Kinase Receptor in Perinatal Life
Our aim is to determineāin 30 healthy full-term infants and their mothersācirculating levels of neurotrophin-3 (NT-3) (important for antenatal and postnatal brain development and implicated in the immune response) and FLT3 tyrosine kinase receptor (FLT3) (controlling hematopoiesis and found in the nervous tissue), in the fetal and neonatal life. NT-3 levels, in contrast to FLT3 ones, increased significantly on the fourth postnatal day in relation to the low levels found in the mother, fetus, and day 1 neonate (P = .03, respectively). Maternal and umbilical NT3 levels positively correlated with respective FLT3 levels (P = .003 and P = .03). Circulating NT-3 levels increased in early neonatal life, possibly due to exposure to various stimuli soon after birth. FLT3 levels do not seem to behave accordingly, although these two substances probably synergize
Reliability and validity of measures of attentional bias towards threat in unselected student samples: seek, but will you find?
Simulating the opto-thermal processes involved in laser induced self-assembly of surface and sub-surface plasmonic nano-structuring
Nano-structuring of metals is one of the greatest challenges for the future of plasmonic and photonic devices. Such a technology calls for the development of ultra-fast, high-throughput and low cost fabrication techniques. Laser processing accounts for the aforementioned properties, representing an unrivalled tool towards the anticipated arrival of modules based in metallic nano-structures, with an extra advantage: the ease of scalability. Specifically, laser nano-structuring of an ultra-thin metal film or an alternating metal film on a substrate/metal film on a substrate results respectively on surface (metallic nanoparticles on the surface of the substrate) or subsurface (metallic nanoparticles embedded in a dielectric matrix) plasmonic patterns with many applications. In this work we investigate theoretically the photo-thermal processes involved in surface and sub-surface plasmonic nano-structuring and compare to experiments. To this end, we present a design process and develop functional
plasmonic nano-structures with pre-determined morphology by tuning the annealing parameters like the laser fluence and wavelength and/or the structure parameters like the thickness of the metallic film and the volume ratio of the metal film on a substrate-metal composite. For the surface plasmonic nano-structuring we utilize the ability to tune the laser's wavelength to either match the absorption spectral profile of the metal or to be
resonant with the plasma oscillation frequency, i.e. we utilize different optical absorption mechanisms that are
size-selective. Thus, we overcome a great challenge of laser induced self assembly by combining simultaneously
large-scale character with nanometer scale precision. For subsurface plasmonic nano-structuring, on the other hand, we utilize the temperature gradients that are developed spatially across the metal/dielectric nano-composite
structure during the laser treatment. We find that the developed temperature gradients are strongly depended on the nanocrystalline character of the dielectric host which determines its thermal conductivity, the composition of the ceramic/metal and the total thickness of the nano-composite film. The aforementioned material parameters combined with the laser annealing parameters can be used to pre-design the final morphology of the sub-surface plasmonic structure. The proposed processes can serve as a platform that will stimulate further progress towards the engineering of plasmonic devices
Diagnostic accuracy of single baseline measurement of Elecsys Troponin T high-sensitive assay for diagnosis of acute myocardial infarction in emergency department: systematic review and meta-analysis
Published onlineJournal ArticleMeta-AnalysisResearch Support, Non-U.S. Gov'tReviewOBJECTIVE: To obtain summary estimates of the accuracy of a single baseline measurement of the Elecsys Troponin T high-sensitive assay (Roche Diagnostics) for the diagnosis of acute myocardial infarction in patients presenting to the emergency department. DESIGN: Systematic review and meta-analysis of diagnostic test accuracy studies. DATA SOURCES: Medline, Embase, and other relevant electronic databases were searched for papers published between January 2006 and December 2013. STUDY SELECTION: Studies were included if they evaluated the diagnostic accuracy of a single baseline measurement of Elecsys Troponin T high-sensitive assay for the diagnosis of acute myocardial infarction in patients presenting to the emergency department with suspected acute coronary syndrome. STUDY APPRAISAL AND DATA SYNTHESIS: The first author screened all titles and abstracts identified through the searches and selected all potentially relevant papers. The screening of the full texts, the data extraction, and the methodological quality assessment, using the adapted QUADAS-2 tool, were conducted independently by two reviewers with disagreements being resolved through discussion or arbitration. If appropriate, meta-analysis was conducted using the hierarchical bivariate model. RESULTS: Twenty three studies reported the performance of the evaluated assay at presentation. The results for 14 ng/L and 3-5 ng/L cut-off values were pooled separately. At 14 ng/L (20 papers), the summary sensitivity was 89.5% (95% confidence interval 86.3% to 92.1%) and the summary specificity was 77.1% (68.7% to 83.7%). At 3-5 ng/L (six papers), the summary sensitivity was 97.4% (94.9% to 98.7%) and the summary specificity was 42.4% (31.2% to 54.5%). This means that if 21 of 100 consecutive patients have the target condition (21%, the median prevalence across the studies), 2 (95% confidence interval 2 to 3) of 21 patients with acute myocardial infarction will be missed (false negatives) if 14 ng/L is used as a cut-off value and 18 (13 to 25) of 79 patients without acute myocardial infarction will test positive (false positives). If the 3-5 ng/L cut-off value is used, <1 (0 to 1) patient with acute myocardial infarction will be missed and 46 (36 to 54) patients without acute myocardial infarction will test positive. CONCLUSIONS: The results indicate that a single baseline measurement of the Elecsys Troponin T high-sensitive assay could be used to rule out acute myocardial infarction if lower cut-off values such as 3 ng/L or 5 ng/L are used. However, this method should be part of a comprehensive triage strategy and may not be appropriate for patients who present less than three hours after symptom onset. Care must also be exercised because of the higher imprecision of the evaluated assay and the greater effect of lot-to-lot reagent variation at low troponin concentrations. SYSTEMATIC REVIEW REGISTRATION: PROSPERO registration number CRD42013003926.This research was funded by the South West Academic Health Science Network (AHSN) and the National Institute for Health Research (NIHR) Collaboration for Leadership for Applied Health Research and Care for the South West Peninsula
Temperature-ramped 129Xe spin-exchange optical pumping
We describe temperature-ramped spin-exchange optical pumping (TR-SEOP) in an automated high-throughput batch-mode 129Xe hyperpolarizer utilizing three key temperature regimes: (i) āhotāwhere the 129Xe hyperpolarization rate is maximal, (ii) āwarmā-where the 129Xe hyperpolarization approaches unity, and (iii) ācoolā where hyperpolarized 129Xe gas is transferred into a Tedlar bag with low Rb content (<5 ng per ā¼1 L dose) suitable for human imaging applications. Unlike with the conventional approach of batch-mode SEOP, here all three temperature regimes may be operated under continuous high-power (170 W) laser irradiation, and hyperpolarized 129Xe gas is delivered without the need for a cryocollection step. The variable-temperature approach increased the SEOP rate by more than 2-fold compared to the constant-temperature polarization rate (e.g., giving effective values for the exponential buildup constant Ī³SEOP of 62.5 Ā± 3.7 Ć 10ā3 minā1 vs 29.9 Ā± 1.2 Ć 10ā3 minā1) while achieving nearly the same maximum %PXe value (88.0 Ā± 0.8% vs 90.1% Ā± 0.8%, for a 500 Torr (67 kPa) Xe cell loadingcorresponding to nuclear magnetic resonance/magnetic resonance imaging (NMR/MRI) enhancements of ā¼3.1 Ć 105 and ā¼2.32 Ć 108 at the relevant fields for clinical imaging and HP 129Xe production of 3 T and 4 mT, respectively); moreover, the intercycle ādeadā time was also significantly decreased. The higher-throughput TR-SEOP approach can be implemented without sacrificing the level of 129Xe hyperpolarization
or the experimental stability for automation-making this approach beneficial for improving the overall 129Xe production rate in clinical settings
- ā¦