1,227 research outputs found
Construction and testing of the optical bench for LISA pathfinder
eLISA is a space mission designed to measure gravitational radiation over a frequency range of 0.1–100 mHz (European Space Agency LISA Assessment Study Report 2011). It uses laser interferometry to measure changes of order in the separation of inertial test masses housed in spacecraft separated by 1 million km. LISA Pathfinder (LPF) is a technology demonstrator mission that will test the key eLISA technologies of inertial test masses monitored by laser interferometry in a drag-free spacecraft. The optical bench that provides the interferometry for LPF must meet a number of stringent requirements: the optical path must be stable at the few level; it must direct the optical beams onto the inertial masses with an accuracy of better than ±25 μm, and it must be robust enough not only to survive launch vibrations but to achieve full performance after launch. In this paper we describe the construction and testing of the flight optical bench for LISA Pathfinder that meets all the design requirements
Piloting and producing a map of Millennium Cohort Study Data usage: Where are data underutilised and where is granularity lost?
The UK Millennium Cohort Study (MCS) is a longitudinal interdisciplinary study following the lives of 19,000 children born in the UK in 2000/1. Information has been collected at 9 months, 3, 5, 7 and 11 years, with the next sweep of data collection underway among study members who are aged 14 years. A wide range of data have been collected from children, parents and guardians, the partners of parents/guardians, older siblings and teachers, as well as sub-studies that collected data from health visitors; these include self-reported and objectively measured/verified data. This study sets out to examine how MCS data are utilised. To fit within the remit of the study, we hone in on ten priority question areas (Strengths and Difficulties Questionnaire, Child Social Behaviour Questionnaire, Diet, BMI, Immunisations, School Dis/like, Self-reported Friendships, Self-reported feelings, Screen Time, Hobbies). In total we found 481 unique studies that were using MCS data and undertaking primary analysis up to July 2015. Data that are collected through a recognised scale with defined thresholds or cut-off points for identifying constructs of interest and/or data that can provide a unique insight into a policy-relevant issue, are those most widely used in the MCS data. Measures that have been collected across sweeps – diet, BMI, SDQ and screen time - are all comparatively well used. Those measures that have started to be collected at age 7 (and first made available in 2010) have had lower usage. Data that were collected from the child’s own reports (e.g. friendships and feelings) have seldom been utilised in comparison to data collected through parental reports (e.g. SDQ). Collection of data from multiple informants did not always correlate with higher levels of usage. Imposing thresholds on data was found to be problematic in some cases, for example for BMI, where a number of different thresholds for overweight and obesity were in use. The use of different thresholds can lead to substantial differences in the results obtained. This is the first review using systematic methods that has explored MCS data use. We set out a number of ideas for good practice around the use of and reporting of MCS data
eLISA Telescope In-field Pointing and Scattered Light Study
The orbital motion of the three spacecraft that make up the eLISA Observatory constellation causes long-arm line of sight variations of approximately one degree over the course of a year. The baseline solution is to package the telescope, the optical bench, and the gravitational reference sensor (GRS) into an optical assembly at each end of the measurement arm, and then to articulate the assembly. An optical phase reference is exchanged between the moving optical benches with a single mode optical fiber (backlink fiber). An alternative solution, referred to as in-field pointing, embeds a steering mirror into the optical design, fixing the optical benches and eliminating the backlink fiber, but requiring the additional complication of a two-stage optical design for the telescope. We examine the impact of an in-field pointing design on the scattered light performance
A regulation-based classification system for marine protected areas: A response to Dudley et al. [9]
Dudley et al. [9] commented on our paper [11], arguing that the current IUCN objective-based categorization of protected areas, which is also used in marine protected areas (MPAs), should not be abandoned and replaced by the new regulation-based classification system [11]. Here we clarify that we do not advocate replacing the current IUCN categories, but highlight the benefits of using both the objective-based IUCN categories and the new regulation-based classification when applied to MPAs. With an increasing number of MPA types being implemented, most of them multiple-use areas zoned for various purposes, assessing ecological and socio-economic benefits is key for advancing conservation targets and policy objectives. Although the IUCN categories can be used both in terrestrial and marine systems, they were not designed to follow a gradient of impacts and there is often a mismatch between stated objectives and implemented regulations. The new regulation-based classification system addresses these problems by linking impacts of activities in marine systems with MPA and zone classes in a simple and globally applicable way. Applying both the IUCN categories and the regulation based classes will increase transparency when assessing marine conservation goals.ERA-Net BiodivERsA project "BUFFER Partially protected areas as buffers to increase the linked social ecological resilience"; national funders ANR (France); FCT (Portugal); FOR-MAS (Sweden); SEPA (Sweden); RCN (Norway); project BUFFER; Fernand Braudel IFER fellowship (Fondation Maison des Sciences de l'Homme); Fundacao para a Ciencia e a Tecnologia (FCT) [UID/MAR/04292/2013
The influence of laser relative intensity noise in the Laser Interferometer Space Antenna
LISA is an upcoming ESA mission that will detect gravitational waves in spaceby interferometrically measuring the separation between free-falling testmasses at picometer precision. To reach the desired performance, LISA willemploy the noise reduction technique time-delay interferometry (TDI), in whichmultiple raw interferometric readouts are time shifted and combined into thefinal scientific observables. Evaluating the performance in terms of these TDIvariables requires careful tracking of how different noise sources propagatethrough TDI, as noise correlations might affect the performance in unexpectedways. One example of such potentially correlated noise is the relativeintensity noise (RIN) of the six lasers aboard the three LISA satellites, whichwill couple into the interferometric phase measurements. In this article, wecalculate the expected RIN levels based on the current mission architecture andthe envisaged mitigation strategies. We find that strict requirements on thetechnical design reduce the effect from approximately 8.7 pm/rtHz perinter-spacecraft interferometer to that of a much lower sub-1 pm/rtHz noise,with typical characteristics of an uncorrelated readout noise after TDI. Ourinvestigations underline the importance of sufficient balanced detection of theinterferometric measurements.<br
Processes controlling carbon cycling in Antarctic glacier surface ecosystems
Glacier surface ecosystems, including cryoconite holes and cryolakes, are significant contributors to regional carbon cycles. Incubation experiments to determine the net production (NEP) of organic matter in cryoconite typically have durations of 6-24 hours, and produce a wide range of results, many of which indicate that the system is net heterotrophic. We employ longer term incubations to examine the temporal variation of NEP in cryoconite from the McMurdo Dry Valleys, Antarctica to examine the effect of sediment disturbance on system production, and to understand processes controlling production over the lifetimes of glacier surface ecosystems. The shorter-term incubations have durations of one week and show net heterotrophy. The longer term incubations of approximately one year show net autotrophy, but only after a period of about 40 days (~1000 hours). The control on net organic carbon production is a combination of the rate of diffusion of dissolved inorganic carbon from heterotrophic activity within cryoconite into the water, the rate of carbonate dissolution, and the saturation of carbonate in the water (which is a result of photosynthesis in a closed system). We demonstrate that sediment on glacier surfaces has the potential to accumulate carbon over timescales of months to years
Efficient growth of complex graph states via imperfect path erasure
Given a suitably large and well connected (complex) graph state, any quantum
algorithm can be implemented purely through local measurements on the
individual qubits. Measurements can also be used to create the graph state:
Path erasure techniques allow one to entangle multiple qubits by determining
only global properties of the qubits. Here, this powerful approach is extended
by demonstrating that even imperfect path erasure can produce the required
graph states with high efficiency. By characterizing the degree of error in
each path erasure attempt, one can subsume the resulting imperfect entanglement
into an extended graph state formalism. The subsequent growth of the improper
graph state can be guided, through a series of strategic decisions, in such a
way as to bound the growth of the error and eventually yield a high-fidelity
graph state. As an implementation of these techniques, we develop an analytic
model for atom (or atom-like) qubits in mismatched cavities, under the
double-heralding entanglement procedure of Barrett and Kok [Phys. Rev. A 71,
060310 (2005)]. Compared to straightforward postselection techniques our
protocol offers a dramatic improvement in growing complex high-fidelity graph
states.Comment: 15 pages, 10 figures (which print to better quality than when viewed
as an on screen pdf
- …