Electromechanical wavelength tuning of double-membrane photonic crystal cavities

We present a method for tuning the resonant wavelength of photonic crystal cavities (PCCs) around 1.55 um. Large tuning of the PCC mode is enabled by electromechanically controlling the separation between two parallel InGaAsP membranes. A fabrication method to avoid sticking between the membranes is discussed. Reversible red/blue shifting of the symmetric/anti-symmetric modes has been observed, which provides clear evidence of the electromechanical tuning, and a maximum shift of 10 nm with < 6 V applied bias has been obtained.Comment: 9 pages, 3 figure

Challenges in the Search for Perchlorate and Other Hydrated Minerals With 2.1-μm Absorptions on Mars

A previously unidentified artifact has been found in Compact Reconnaissance Imaging Spectrometer for Mars targeted I/F data. It exists in a small fraction (<0.05%) of pixels within 90% of images investigated and occurs in regions of high spectral/spatial variance. This artifact mimics real mineral absorptions in width and depth and occurs most often at 1.9 and 2.1 μm, thus interfering in the search for some mineral phases, including alunite, kieserite, serpentine, and perchlorate. A filtering step in the data processing pipeline, between radiance and I/F versions of the data, convolves narrow artifacts (“spikes”) with real atmospheric absorptions in these wavelength regions to create spurious absorption-like features. The majority of previous orbital detections of alunite, kieserite, and serpentine we investigated can be confirmed using radiance and raw data, but few to none of the perchlorate detections reported in published literature remain robust over the 1.0- to 2.65-μm wavelength range

Bayesian Non-Exhaustive Classification A Case Study: Online Name Disambiguation using Temporal Record Streams

The name entity disambiguation task aims to partition the records of multiple real-life persons so that each partition contains records pertaining to a unique person. Most of the existing solutions for this task operate in a batch mode, where all records to be disambiguated are initially available to the algorithm. However, more realistic settings require that the name disambiguation task be performed in an online fashion, in addition to, being able to identify records of new ambiguous entities having no preexisting records. In this work, we propose a Bayesian non-exhaustive classification framework for solving online name disambiguation task. Our proposed method uses a Dirichlet process prior with a Normal * Normal * Inverse Wishart data model which enables identification of new ambiguous entities who have no records in the training data. For online classification, we use one sweep Gibbs sampler which is very efficient and effective. As a case study we consider bibliographic data in a temporal stream format and disambiguate authors by partitioning their papers into homogeneous groups. Our experimental results demonstrate that the proposed method is better than existing methods for performing online name disambiguation task.Comment: to appear in CIKM 201

Moderators of the effect of psychological interventions on depression and anxiety in cardiac surgery patients: A systematic review and meta-analysis

Cardiac surgery patients may be provided with psychological interventions to counteract depression and anxiety associated with surgical procedures. This systematic review and meta-analysis investigated whether intervention efficacy was impacted by type of cardiac procedure/cardiac event; control condition content; intervention duration; intervention timing; facilitator type; and risk of bias. MEDLINE, EMBASE, and PsycINFO were searched for randomized controlled trials comparing anxiety and depression outcomes, pre and post psychological and cardiac interventions. Twenty-four studies met the inclusion criteria for the systematic review (N = 2718) and 16 of those were meta-analysed (N = 1928). Depression and anxiety outcomes were reduced more in interventions that lasted longer, were delivered post-surgery, and by trained health professionals. Depression (but not anxiety) was reduced more when the experimental intervention was compared to an ‘alternative’ intervention, and when the intervention was delivered to coronary artery bypass graft patients. Anxiety (but not depression) was decreased more when interventions were delivered to implantable cardioverter defibrillator patients, and were of ‘high’ or ‘unclear’ risk of bias. In addition to estimating efficacy, future work in this domain needs to take into account the moderating effects of intervention, sample, and study characteristics

Güçlendirilmiş dental seramiklerin vickers sertlikleri ve yük altında kırılma davranışları

Objective: The objectives of this study were to determine the Vicker`s hardness of reinforced dental ceramics and determine the modes of fractures under load. Methods: Four ceramic core groups (n=7/group) from leucite (Evopress,Wegold&amp;De), low leucite (Finesse, Ceramco), glass-infiltrated (Inceram Alumina,Vita) and lithium disilicate materials (E.max press, Ivoclar) were fabricated according to each manufacturers’ instructions (thickness: 3 mm, diameter: 5 mm). Their individual veneering ceramics were vibrated, condensed in a stainless steel mold (diameter: 5 mm, height: 5 mm) and fired on the core materials. The specimens were stored in distilled water at 37°C for 24 hours prior to indentation tests and embedded in polyesther moulds. Vickers hardness values (DUH±SD) were measured (cross-head speed:7,2 gf/s, load:200 gf) and statistically analysed (ANOVA). A load of 400 N was applied on the surfaces of specimens with a diamond indentor (diameter:1 mm) at the macro hardness test machine for crack formation. The crack modes for each group were observed under the scanning electrone microscope. Results: The Vickers hardness values for low leucite veneering ceramic were significantly (P&lt;0.05) higher (236±17), followed by the leucite (129±51), glass-infiltrated (117±38), and lithium disilicate (85±34) veneering ceramic materials in decreasing order. Mainly radial or cone cracks were observed after the application of load. Conclusion: The increase in the hardness of the material led to more crack formation and resulted in longer cracks. No crack formation extending to the core materials were observed in neither of the ceramic groups under these experimental conditions. ÖZET Amaç: Bu çalışmanın amacı güçlendirilmiş dental seramiklerin Vickers sertlik değerlerinin ve yük altındaki kırılma şekillerinin belirlenmesidir. Gereç ve Yöntem: Lösit (Evopress,Wegold&amp;De), düşük lösit (Finesse, Ceramco), cam infiltrasyonlu aluminöz seramik (Inceram Alumina,Vita) ve lityum disilikat (E.max press, Ivoclar) bazlı dört farklı seramik alt yap_ materyali (n=7/grup) her bir üretici firmanın önerileri doğrultusunda hazırlandı (3 mm kalınlıkta; 5 mm çapta). Her bir alt yapı seramiğine özgü kaplama seramikleri; paslanmaz çelik bir metal kalıpta (5mm çap 5mm yükseklikte) vibrasyonla kondanse edildi ve alt yapı seramiklerinin üzerine pişirildi. Örnekler batırma testlerinden önce 37°C’ de 24 saat distile suda bekletildikten sonra polyester kalıplara gömüldü. Vickers sertlik değerleri (DUH±SD) ölçüldü (çene hızı:7,2 gf/s, yük:200 gf) ve veriler istatistiksel olarak analiz edildi (ANOVA). Çatlak oluşumu için örneklerin üst yüzeylerine makro sertlik test cihazında batıcı elmas uç ile (1 mm çaplı) 400 N yük uygulandı. Alınan taramalı elektron mikroskop görüntüleri ile her bir gruba ilişkin çatlak şekilleri gözlemlendi. Bulgular: Gruplar arasında ortalama Vickers sertlik değerleri düşük lösit grubu için anlamlı olarak (P&lt;0.05) en yüksek bulunur iken (236±17), bunu lösit (129±51), cam infiltrasyonlu aluminöz seramik (117±38), ve lityum disilikat (85±34) kaplama seramik materyalleri azalan sırayla izledi. Yük uygulaması sonrasında genellikle ışınsal ya da koni şekilli çatlakların oluştuğu gözlendi. Sonuç: Seramik materyalin sertliğinin artması daha fazla ve daha uzun çatlak oluşumuna yol açtı. Bu çalışmadaki deneysel koşullar altında kaplama seramik gruplarının hiçbirinde alt yapı seramiklerine ulaşan çatlak oluşumu gözlenmedi

The interaction between ectomycorrhizal fungi and growth promoting bacteria in plant development from in-vitro to the field

There is currently an array of biotechnological tools which may positively influence plant development and establishment. Symbiosis with ectomycorrhizal fungi is known to improve plant health by increasing nutrient and water uptake and alleviating environmental stresses. Some rhizosphere bacteria are also proven to act as plant stimulating agents, health managers and growth promoters. The use of a combined inoculum using both microorganisms has great potential in forestry. Nevertheless, the interaction between fungi and bacteria is highly specific and bacteria are known not only to enhance fungal growth (mycorrhiza promoting bacteria), but also to strongly inhibit it. It is therefore important to evaluate the compatibility between ectomycorrhizal fungi and bacteria and to determine the impact of such combination in plant development when aiming at the use of optimized microbial inoculum for enhancing plant growth. In the present work we investigated the use of a dual inoculation system, consisting of a bacterial strain from the genus Mesorhizobium in combination with ectomycorrhizal fungi, from in-vitro tests to a nursery stage followed by transplantation to the field. Approximately 5000 seedlings were used in these experiments comprising Quercus suber, Quercus robur, Quercus rubra, Pinus pinaster and Pinus pinea. Seedlings were grown for 9 months in a commercial forest greenhouse and then transplanted to 4 locations in Portugal. The first sampling was made before field transplantation. Results showed that the combined use of fungi-bacteria inoculum significantly influenced plant growth and its effect was different from that of each individual microbial partner, emphasizing the strong interaction between microorganisms