Independent Orbiter Assessment (IOA): Assessment of the life support and airlock support systems, volume 1

The results of the Independent Orbiter Assessment (IOA) of the Failure Modes and Effects Analysis (FMEA) and Critical Items List (CIL) are presented. The IOA effort first completed an analysis of the Life Support and Airlock Support Systems (LSS and ALSS) hardware, generating draft failure modes and potential critical items. To preserve independence, this analysis was accomplished without reliance upon the results contained within the NASA FMEA/CIL documentation. The IOA results were then compared to the NASA FMEA/CIL baseline with proposed Post 51-L updates included. The discrepancies were flagged for potential future resolution. This report documents the results of that comparison for the Orbiter LSS and ALSS hardware. The IOA product for the LSS and ALSS analysis consisted of 511 failure mode worksheets that resulted in 140 potential critical items. Comparison was made to the NASA baseline which consisted of 456 FMEAs and 101 CIL items. The IOA analysis identified 39 failure modes, 6 of which were classified as CIL items, for components not covered by the NASA FMEAs. It was recommended that these failure modes be added to the NASA FMEA baseline. The overall assessment produced agreement on all but 301 FMEAs which caused differences in 111 CIL items

The visual nonverbal memory trace is fragile when actively maintained, but endures passively for tens of seconds

Despite attempts at active maintenance in the focus of attention, the fragile nature of the visual nonverbal memory trace may be revealed when the retention interval between target memoranda and probed recall on a trial is extended. In contrast, a passively maintained or unattended visual memory trace may be revealed as persisting proactive interference extending across quite extended intervals between trials in a recent probes task. The present study, comprising five experiments, used this task to explore the persistence of such a passive visual memory trace over time. Participants viewed some target visual items (for example, abstract colored patterns) followed by a variable retention interval and a probe item. The task was to report whether the probe matched one of the targets or not. A decaying active memory trace was indicated by poorer performance as the memory retention interval was extended on a trial. However, when the probe was a member of the target set from the preceding trial, task performance was poorer than a comparison novel probe, demonstrating proactive interference. Manipulations of the intertrial interval revealed that the temporal persistence of the passive memory trace of an old target was impressive, and proactive interference was largely resilient to a simple ‘cued forgetting’ manipulation. These data support the proposed two-process memory conception (active–passive memory) contrasting fragile active memory traces decaying over a few seconds with robust passive traces extending to tens of seconds

Large deviations for a damped telegraph process

In this paper we consider a slight generalization of the damped telegraph process in Di Crescenzo and Martinucci (2010). We prove a large deviation principle for this process and an asymptotic result for its level crossing probabilities (as the level goes to infinity). Finally we compare our results with the analogous well-known results for the standard telegraph process

Anisotropic nonlinear elasticity in a spherical bead pack: influence of the fabric anisotropy

Stress-strain measurements and ultrasound propagation experiments in glass bead packs have been simultaneously conducted to characterize the stress-induced anisotropy under uniaxial loading. These measurements, realized respectively with finite and incremental deformations of the granular assembly, are analyzed within the framework of the effective medium theory based on the Hertz-Mindlin contact theory. Our work shows that both compressional and shear wave velocities and consequently the incremental elastic moduli agree fairly well with the effective medium model by Johnson et al. [J. Appl. Mech. 65, 380 (1998)], but the anisotropic stress ratio resulting from finite deformation does not at all. As indicated by numerical simulations, the discrepancy may arise from the fact that the model doesn't properly allow the grains to relax from the affine motion approximation. Here we find that the interaction nature at the grain contact could also play a crucial role for the relevant prediction by the model; indeed, such discrepancy can be significantly reduced if the frictional resistance between grains is removed. Another main experimental finding is the influence of the inherent anisotropy of granular packs, realized by different protocols of the sample preparation. Our results reveal that compressional waves are more sensitive to the stress-induced anisotropy, whereas the shear waves are more sensitive to the fabric anisotropy, not being accounted in analytical effective medium models.Comment: 9 pages, 8 figure

Contemplating Mindfulness at Work: An Integrative Review

Mindfulness research activity is surging within organizational science. Emerging evidence across multiple fields suggests that mindfulness is fundamentally connected to many aspects of workplace functioning, but this knowledge base has not been systematically integrated to date. This review coalesces the burgeoning body of mindfulness scholarship into a framework to guide mainstream management research investigating a broad range of constructs. The framework identifies how mindfulness influences attention, with downstream effects on functional domains of cognition, emotion, behavior, and physiology. Ultimately, these domains impact key workplace outcomes, including performance, relationships, and well-being. Consideration of the evidence on mindfulness at work stimulates important questions and challenges key assumptions within management science, generating an agenda for future research

Large deviations provide good approximation to queueing system with dynamic routing

We consider a system with two infinite-buffer FCFS servers (of speed one). The arrivals processes are three independent Poisson flows Ξ_i , of rates λ_i, i = 0, 1, 2, each with IID task service times. The tasks from Ξ_i are directed to server i, i = 1, 2 (dedicated traffic). The tasks from Ξ_0 are directed to the server that has the shorter workload in the buffer at the time of arrival (opportunistic traffic). We compare the analytical data for the large deviation (LD) probabilities for the virtual waiting time in flow Ξ_0 and empercial delay freqencies from simulations

Mpemba Effect, Shechtman's Quasicrystals and Students' Exploring Activities

In the 1960s, Tanzanian student Erasto Mpemba and his teacher published an article with the title "Cool" in the journal Physics Education (Mpemba, E. B. - Osborne, D. G.: Cool?. In: Physics Education, vol.4, 1969, pp. 172-175.). In this article they claimed that hot water freezes faster than cold water. The article raised not only a wave of discussions, and other articles about this topic, but also a whole series of new experiments, which should verify this apparent thermodynamic absurdity and find an adequate explanation. Here we give a review with references to explanations and we bring some proposals for experimental student work in this area. We introduce Mpemba Effect not only as a paradoxical physics phenomenon, but we shall present a strong educational message that the Mpemba story brings to the teachers and their students. This message also creates a bridge between this phenomenon and the discovery for which the 2011 Nobel Prize in Chemistry was awarded. It leads to critical adoption of traditional knowledge and encourages resilience in investigative exploration of new things

Malaria Transmission-Blocking Vaccines: Present Status and Future Perspectives

Transmission-blocking vaccines (TBVs) utilize Plasmodium sexual stage proteins to induce antibodies that prevent parasites from infecting blood-fed mosquitoes. This type of vaccine, which can be considered a “vaccine of solidarity,” reduces Plasmodium infections within communities without conferring direct protective immunity to the vaccine recipients. The leading TBV candidates have advanced to field clinical trials, where vaccine-induced antibody function has been demonstrated in mosquito-feeding assays. However, the duration of functional antibody responses has been short-lived; hence current development has focused on improved adjuvant and vaccine delivery systems to generate long-lasting immune responses. For the future implementation of TBVs, community perceptions and understandings should be considered, and education should be provided on the concept and its value. Implementation will need to be undertaken in harmony with current malaria control policies

Heat and fluid flow in a scraped-surface heat exchanger containing a fluid with temperature-dependent viscosity

Scraped-surface heat exchangers (SSHEs) are extensively used in a wide variety of industrial settings where the continuous processing of fluids and fluid-like materials is involved. The steady non-isothermal flow of a Newtonian fluid with temperature-dependent viscosity in a narrow-gap SSHE when a constant temperature difference is imposed across the gap between the rotor and the stator is investigated. The mathematical model is formulated and the exact analytical solutions for the heat and fluid flow of a fluid with a general dependence of viscosity on temperature for a general blade shape are obtained. These solutions are then presented for the specific case of an exponential dependence of viscosity on temperature. Asymptotic methods are employed to investigate the behaviour of the solutions in several special limiting geometries and in the limits of weak and strong thermoviscosity. In particular, in the limit of strong thermoviscosity (i.e., strong heating or cooling and/or strong dependence of viscosity on temperature) the transverse and axial velocities become uniform in the bulk of the flow with boundary layers forming either just below the blade and just below the stationary upper wall or just above the blade and just above the moving lower wall. Results are presented for the most realistic case of a linear blade which illustrate the effect of varying the thermoviscosity of the fluid and the geometry of the SSHE on the flow