5,557 research outputs found
Rationale and protocol for a systematic review and meta-analysis on reduced data gathering in people with delusions
Determination of renewable energy yield from mixed waste material from the use of novel image analysis methods
Two novel techniques are presented in this study which together aim to provide a system able to determine the renewable energy potential of mixed waste materials. An image analysis tool was applied to two waste samples prepared using known quantities of source-segregated recyclable materials. The technique was used to determine the composition of the wastes, where through the use of waste component properties the biogenic content of the samples was calculated. The percentage renewable energy determined by image analysis for each sample was accurate to within 5% of the actual values calculated. Microwave-based multiple-point imaging (AutoHarvest) was used to demonstrate the ability of such a technique to determine the moisture content of mixed samples. This proof-of-concept experiment was shown to produce moisture measurement accurate to within 10%. Overall, the image analysis tool was able to determine the renewable energy potential of the mixed samples, and the AutoHarvest should enable the net calorific value calculations through the provision of moisture content measurements. The proposed system is suitable for combustion facilities, and enables the operator to understand the renewable energy potential of the waste prior to combustion
Depressed youth, suicidality and antidepressants
The document attached has been archived with permission from the editor of the Medical Journal of Australia. An external link to the publisher’s copy is included.Robert D Goldney, Peter R Mansfield, Melissa K Raven, Jon N Jureidini, Joseph M Rey, Michael J Dudley, Duncan Toplis
Phenyl Chlorocarbonate and Substitution Products as Acylating Agents
Hinsberg and Udranszky (1) converted 2-aminophenol into the 0- ·benzoyl-N-benzoyl derivative by means of the Schotten-Baumann (2) reaction. Raiford and Inman (3) prepared a number of N-carboaryloxy derivatives of 2-aminophenol by following the method of Groenvik (4) who used ethyl chlorocarbonate as the only reagent. When these compounds were mixed with caustic alkali solution for the purpose of acylating them (2) they were converted into the corresponding benzoxazolones while the required phenols were eliminated. It was further shown that warming 2-N-carboaryloxyaminophenol with pyridine and with acetic anhydride, respectively, caused ring closure, and that in the latter instance there was formed Nacetylbenzoxazolone, previously prepared in a different way by Kalckhoff (5). This tendency toward ring formation is so great that when 2-benzoylaminophenol, in caustic alkali or pyridine solution, is treated with phenyl chlorocarbonate phenol is liberated and N-benzoylbenzoxazolone is obtained in yields as high as 85%. No diacyl derivatives of 2-aminophenol were obtained by this method
On the modulation instability development in optical fiber systems
Extensive numerical simulations were performed to investigate all stages of
modulation instability development from the initial pulse of pico-second
duration in photonic crystal fiber: quasi-solitons and dispersive waves
formation, their interaction stage and the further propagation. Comparison
between 4 different NLS-like systems was made: the classical NLS equation, NLS
system plus higher dispersion terms, NLS plus higher dispersion and
self-steepening and also fully generalized NLS equation with Raman scattering
taken into account. For the latter case a mechanism of energy transfer from
smaller quasi-solitons to the bigger ones is proposed to explain the dramatical
increase of rogue waves appearance frequency in comparison to the systems when
the Raman scattering is not taken into account.Comment: 9 pages, 54 figure
Fundamental noise limitations to supercontinuum generation in microstructure fiber
Broadband noise on supercontinuum spectra generated in microstructure fiber
is shown to lead to amplitude fluctuations as large as 50 % for certain input
laser pulse parameters. We study this noise using both experimental
measurements and numerical simulations with a generalized stochastic nonlinear
Schroedinger equation, finding good quantitative agreement over a range of
input pulse energies and chirp values. This noise is shown to arise from
nonlinear amplification of two quantum noise inputs: the input pulse shot noise
and the spontaneous Raman scattering down the fiber.Comment: 16 pages with 6 figure
Radiographic protocol and normal anatomy of the hind feet in the white rhinoceros (ceratotherium simum)
A Multi-Sims Investigation of Water Content and D/H Ratios in Roberts Massif 04262 with Insight to Sources of Hydrogen in Maskelynite
We want to define the H2O content ([H2O]) and hydrogen (H) isotope composition of meteoritic material from Mars [1-3] with motivation to understand Mars volatile history, constrain geochemical signatures of interior water reservoirs (i.e. the Martian mantle) and explore effects of planetary (e.g. planet formation, magma ocean degassing) and local (e.g. volcanic degassing, impact melting and degassing) processes on H incorporated in minerals. Secondary ion mass spectrometry (SIMS) allows multiple avenues to address these questions. However, application to (1) precious astromaterials and (2) low level H measurements, pose specific challenges that are further complicated when combined. We present preliminary data of a multi-approach (SIMS vs. NanoSIMS) study of H in Roberts Massif 04262 (RBT 04262), an enriched lherzolitic shergottite with nonpoikilitic (NP) and poikilitic (P) lithologies [4]. We analyze olivine, pyrox-ene, and melt inclusions to compare indigenous mantle water, with impact-generated maskelynite to investigate H signatures due to shock
Chalcogenide-glass polarization-maintaining photonic crystal fiber for mid-infrared supercontinuum generation
In this paper, we report the design and fabrication of a highly birefringent
polarization-maintaining photonic crystal fiber (PM-PCF) made from chalcogenide
glass, and its application to linearly-polarized supercontinuum (SC) generation
in the mid-infrared region. The PM fiber was drawn using the casting method
from As38Se62 glass which features a transmission window from 2 to 10
and a high nonlinear index of 1.13.10mW. It has a
zero-dispersion wavelength around 4.5 and, at this wavelength, a large
birefringence of 6.10 and consequently strong polarization maintaining
properties are expected. Using this fiber, we experimentally demonstrate
supercontinuum generation spanning from 3.1-6.02 and 3.33-5.78
using femtosecond pumping at 4 and 4.53 , respectively. We
further investigate the supercontinuum bandwidth versus the input pump
polarization angle and we show very good agreement with numerical simulations
of the two-polarization model based on two coupled generalized nonlinear
Schr\"odinger equations.Comment: 13 pages, 8 figure
- …