Interloper bias in future large-scale structure surveys

Next-generation spectroscopic surveys will map the large-scale structure of the observable universe, using emission line galaxies as tracers. While each survey will map the sky with a specific emission line, interloping emission lines can masquerade as the survey's intended emission line at different redshifts. Interloping lines from galaxies that are not removed can contaminate the power spectrum measurement, mixing correlations from various redshifts and diluting the true signal. We assess the potential for power spectrum contamination, finding that an interloper fraction worse than 0.2% could bias power spectrum measurements for future surveys by more than 10% of statistical errors, while also biasing power spectrum inferences. We also construct a formalism for predicting cosmological parameter bias, demonstrating that a 0.15%-0.3% interloper fraction could bias the growth rate by more than 10% of the error, which can affect constraints on gravity upcoming surveys. We use the COSMOS Mock Catalog (CMC), with the emission lines re-scaled to better reproduce recent data, to predict potential interloper fractions for the Prime Focus Spectrograph (PFS) and the Wide-Field InfraRed Survey Telescope (WFIRST). We find that secondary line identification, or confirming galaxy redshifts by finding correlated emission lines, can remove interlopers for PFS. For WFIRST, we use the CMC to predict that the 0.2% target can be reached for the WFIRST H$\alpha$ survey, but sensitive optical and near-infrared photometry will be required. For the WFIRST [OIII] survey, the predicted interloper fractions reach several percent and their effects will have to be estimated and removed statistically (e.g. with deep training samples). (Abridged)Comment: Matches version accepted by PAS

Activities of the RTG Radiation Test Laboratory Progress report, 1 Jul. - 31 Dec. 1969

Safety, gamma ray spectrum, and data analysis of SNAP fuel capsule

Freezing Out Early Dark Energy

A phenomenological model of dark energy that tracks the baryonic and cold dark matter at early times but resembles a cosmological constant at late times is explored. In the transition between these two regimes, the dark energy density drops rapidly as if it were a relic species that freezes out, during which time the equation of state peaks at +1. Such an adjustment in the dark energy density, as it shifts from scaling to potential-domination, could be the signature of a trigger mechanism that helps explain the late-time cosmic acceleration. We show that the non-negligible dark energy density at early times, and the subsequent peak in the equation of state at the transition, leave an imprint on the cosmic microwave background anisotropy pattern and the rate of growth of large scale structure. The model introduces two new parameters, consisting of the present-day equation of state and the redshift of the freeze-out transition. A Monte Carlo Markov Chain analysis of a ten-dimensional parameter space is performed to compare the model with pre-Planck cosmic microwave background, large scale structure and supernova data and measurements of the Hubble constant. We find that the transition described by this model could have taken place as late as a redshift z~400. We explore the capability of future cosmic microwave background and weak lensing experiments to put tighter constraints on this model. The viability of this model may suggest new directions in dark-energy model building that address the coincidence problem.Comment: 11 pages, 15 figure

DLI-CVD of TiO2–Cu antibacterial thin films: Growth and characterization

TiO2–Cu nanocomposite films were grown by pulsed direct liquid injection chemical vapor deposition (DLICVD) on stainless steel, silicon and glass substrates with the goal to produce bactericidal surfaces. Copper bis (2,2,6,6-tetramethyl-3,5-heptadionate), Cu(TMHD)2, and titanium tetra-iso-propoxide, TTIP, were used as metalorganic precursors. Liquid solutions of these compounds in xylene were injected in a flash vaporization chamber connected to a cold wall MOCVD reactor. The deposition temperature was typically 683 K and the total pressure was 800 Pa. The copper content of the layers was controlled by the mole fraction of Cu (TMHD)2 which was adjusted by the injection parameters (injection frequency and concentration of the starting solution). The chemical, structural and physical characteristics of the films were investigated by XRD, XPS, FEG-SEM and TEM. Copper is incorporated as metal particles with a relatively large size distribution ranging from 20 to 400 nm (with a large majority in 20–100 nm) depending on the copper content of the films. The influence of the growth conditions on the structural features and the antibacterial properties of the thin films are reported and discussed

Optical conductivity of CuO_2 infinite-layer films

The infrared conductivity of CaCuO_2, SrCuO_{2-y}, and Sr_{0.85}Nd_{0.15}CuO_2 infinite-layer films is obtained from reflectivity measurements by taking into account the substrate contribution. SrCuO_{2-y} and Sr_{0.85}Nd_{0.15}CuO_2 exhibit extra-phonon modes and structured bands in the midinfrared, not found in stoichiometric CaCuO_2. These features mirror those observed in the perovskitic cuprates, thus showing that the polaronic properties of high-T_c superconductors are intrinsic to the CuO_2 planes.Comment: File latex, 5 p. incl. 4 fig. in epsf. Submitted to Solid State Com

Cultivation of embryos of Drosophyllum lusitanicum link-an insectivorous plant

There has been growing interest in recent years in the understanding of nutrition and flowering of insectivorous angiosperms in axenic cultures. This note reports our preliminary results on the cultivation of seeds and embroys of Drosophyllum lusitanicum Link. The seed is pyramidal in shape and has a thick, black seed coat. The mature embryo is small and fully organized. The bulk of the seed is occupied by the cellular, starchy endosperm. Modified White's medium containing 2% sucrose and solidified with 0.8% agar but without IAA served as the basal medium (WB). Mature seeds were surface sterilized with chlorine water and planted on WB as well as on WB + 500 mg/1 each of beef extract, casein hydrolysate and yeast extract separately

Clean and Dirty Superconductivity in Pure, Al doped, and Neutron Irradiated MgB2: a Far-Infrared Study

The effects of Al substitution and neutron irradiation on the conduction regime (clean or dirty) of the $\pi$- and $\sigma$-band of MgB$_{2}$ have been investigated by means of far-infrared spectroscopy. The intensity reflected by well characterized polycrystalline samples was measured up to 100 cm$^{- 1}$ in both normal and superconducting state. The analysis of the superconducting to normal reflectivity ratios shows that only the effect of the opening of the small gap in the dirty $\pi$-band can be clearly observed in pure MgB$_{2}$, consistently with previous results. In Al-doped samples the dirty character of the $\pi$-band is increased, while no definitive conclusion on the conduction regime of the $\sigma$-band can be drawn. On the contrary, results obtained for the irradiated sample show that the irradiation-induced disorder drives the $\sigma$-band in the dirty regime, making the large gap in $\sigma$-band observable for the first time in far-infrared measurements.Comment: 11 pages, 1 figur

Quantification of aortic valvuloplasty catheter size using a metrology system based on brightfield microscopy

Balloon aortic valvuloplasty (BAV) has been employed [1] as a simple and low-cost treatment method for patients with severe aortic stenosis, for symptom palliation in patients considered inoperable, for aortic valve replacement and to select the proper transcatheter heart valve (THV) size. During THV implantation choosing the correct balloon size is paramount for minimizing the risks of coronary occlusion, annular damage or THV embolization. Current methods for selecting the proper balloon dimensions are based on transesophageal echocardiography and computed tomography requiring trained staff for image interpretation, expensive equipment and high doses of patient radiation exposure. Alternative methods propose the use of BAV to determine the correct THV size before its implantation [2]. The strategy is based on determining the BAV aortic anulus using a sterile caliper. Any slight pressure to the balloon may compromise the measurement accuracy. In this paper, we present a non-contact metrology system for BAV measurement based on bright field microscopy (BFM). The balloons under test (MedTek-22 and TrueDilation-22) were clamped vertically, employing a tension spring to restrict movement and ensure perpendicularity to the microscope optical axis. The BFM is based on an Olympus PLN 4X WD~18.5mm, NA 0.1, a tube lens (f~180mm) and a FL3-U3- 13S2M-CS camera mounted on top of a custom-made linear stage having a coarse resolution of ~ 3.3µm. Balloon expansion was performed using a Boston scientific Encore 26 inflation device. The balloons are made up of an outer shell with an internal catheter tube (Ø~2mm). By focusing the microscope on the internal tube, then moving the linear stage to refocus on the balloon outer wall, the inner tube to outer wall dimension (see figure inset) can be accurately measured using the linear stage digital readout. The balloon was inflated up to six times recording the pressure and radius at each stage of inflation (twice the amount required for THV). Our non-contact method preserves the catheter sterile conditions and allows the accurate measurement of the BAV anulus showing: a) repeatability of the achieved balloon radius within all the inflation rounds, b) accurate measurements with a standard error of ±200 µm c) and a variation of 1.38 ±0.0387 mm from the manufacturer data. Knowing the exact balloon dimensions is crucial for avoiding the adverse consequences of THV oversizing. Our method may potentially improve the safety and efficacy of THV implantation

Studies on the cytokinins in fruits I. Occurrence and levels of cytokinin-like substances in grape berries at different developmental stages

The occurrence and levels of cytokinin-like substances in the berries of Bangalore Blue grapes were studied at different stages of growth. The concentration of cytokinins was maximum cluring anthesis ancl the first rapid growth period. The level of cytokinins cleclined markedly cluring the lag and subsequent rapid growth phase. Two growth promoting zones were cletectecl by soybean callus bioassay in the thin layer chromatographs of berry extracts, at all stages of sampling. Although the identity of cytokinin-like substances has not been establishecl, the present study supports the hypothesis that besides auxins, gibberellins, abscisic acid and ethylene, cytokinins are also involvecl in the growth and development of grape berries.Untersuchungen über die Cytokinine in FrüchtenI. Vorkommen und Gehalt cytokininartiger Substanzen in Traubenbeeren verschiedenen EntwicklungszustandesIn verschiedenen Entwicklungsstadien der Beeren von Bangalore Blue wurden das Auftreten und die Menge cytokininartiger Substanzen untersucht. Die Cytokininkonzentration war während der Anthese und der ersten Phase raschen Wachstums am höchsten. Während der anschließenden Phase verlangsamten Wachstums und der darauf folgenden Phase erneuten starken Wachstums fiel die Cytokininkonzentration deutlich ab. Mit Hilfe des Sojabohnenkallus-Tests wurden auf den Dünnschichtchromatogrammen von Beerenextrakten aller Entwicklungsstadien zwei wachstumsfördernde Zonen nachgewiesen. Obgleich die cytokininartigen Substanzen nicht identifiziert wurden, wird durch die vorliegende Untersuchung doch die Hypothese gestützt, daß neben Auxinen, Gibberellinen, Abscisinsäure und Äthylen auch Cytokinine in das Wachstums- und Entwicklungsgeschehen der Traubenbeeren eingeschaltet sind