Disentanglement and Decoherence by Open System Dynamics

The destruction of quantum interference, decoherence, and the destruction of entanglement both appear to occur under the same circumstances. To address the connection between these two phenomena, we consider the evolution of arbitrary initial states of a two-particle system under open system dynamics described by a class of master equations which produce decoherence of each particle. We show that all initial states become separable after a finite time, and we produce the explicit form of the separated state. The result extends and amplifies an earlier result of Di\'osi. We illustrate the general result by considering the case in which the initial state is an EPR state (in which both the positions and momenta of a particle pair are perfectly correlated). This example clearly illustrates how the spreading out in phase space produced by the environment leads to certain disentanglement conditions becoming satisfied.Comment: 15 Page

Influence of water absorption in flexible epoxy resins on the space charge behaviour

The aim of the current work is to achieve a better understanding of the influence of water uptake in flexible epoxy resins on the space charge dynamics at high electric fields. The space charge behaviour was studied using pulsed electroacoustic (PEA) technique. The samples were prepared from Araldite CY1311, which is a bisphenol-A epoxy resin. This particular resin was chosen because its glass transition is 0°C and hence it is in a flexible state at room temperature. All samples were conditioned in containers with saturated salt solutions or de-ionised water so that various water uptake levels were obtained. It was found that the space charge dynamics was correlated with the amount of absorbed water in the samples and this is consistent with the dielectric measurements made on the same material where ion transport was identified as the main charge transport process from the observed QDC behaviour

Limitations of Kramers-Kronig transform for calculation of the DC conductance magnitude from dielectric measurements

The Kramers-Kronig (K-K) transform relates the real and imaginary parts of the complex susceptibility as a consequence of the principle of causality. It is a special case of the Hilbert transform and it is often used for estimation of the DC conductance from dielectric measurements. In this work, the practical limitations of a numerical implementation of the Kramers-Kronig transform was investigated in the case of materials that exhibit both DC conductance and quasi-DC (QDC) charge transport processes such as epoxy resins. The characteristic feature of a QDC process is that the real and imaginary parts of susceptibility (permittivity) follow fractional power law dependences with frequency with the low frequency exponent approaching -1. Dipolar relaxation in solids on the other hand has a lower frequency exponent <1. The computational procedure proposed by Jonscher for calculation of the K-K transform involves extrapolation and truncation of the data to low frequencies so that convergence of the integrals is ensured. The validity of the analysis is demonstrated by performing K-K transformation on real experimental data and on theoretical data generated using the Dissado-Hill function. It has been found that the algorithm works well for dielectric relaxation responses but it is apparent that it does not work in the case of a low frequency power law in which the low frequency exponent approaches -1, i.e. in the case of QDC responses. In this case convergence can only be guaranteed by extrapolating the low frequency power law over many decades towards zero frequency

Statistical Analysis of Partial Discharges from Electrical Trees Grown in a Flexible Epoxy Resin

Electrical treeing is a long-term degradation mechanism in polymeric insulation, which can lead to electrical failure of HV insulation systems. The rate at which trees grow across the insulation depends on the PD activity occurring within them and hence the detection of the onset of electrical treeing could be established by PD monitoring. In this paper, a statistical analysis of the partial discharges detected during the growth of trees in an epoxy resin will be reported. The aim of this work was to provide additional insight into the physical mechanisms that lead to the observed fluctuations in the partial discharge activity. The results demonstrate interesting correlations between a number of statistical parameters, such as average discharge magnitude and standard deviation in the partial discharge amplitudes. These correlations could also be related to physical parameters such as the applied voltage magnitude and the measured power dissipation due to the partial discharges occurring during tree growth. The implications of this work for deterministic methodologies for the simulation of tree growth as well as for condition monitoring using feature recognition strategies for the early detection of tree growth will be discussed

Influence of semicon shields on the dielectric loss of XLPE cables

Dielectric response measurement techniques in both time and frequency domains are studied in order to measure the dielectric loss of XLPE cables, which have very low losses. A high sensitivity transformer ratio bridge system, which can measure loss tangents as low as 10-5, has been developed with the ability to measure these cables. A tuned amplifier was designed to help to extend the frequency range from 200Hz to 20kHz. Different model cables from Borealis AB with different semiconducting materials have been measured in the temperature range 15⁰C to 120⁰C. It is found that the semiconducting layers dominate the dielectric loss in the insulation system of the XLPE cables, when the outer semicon is treated as measuring electrode. In this case, steadily increasing dielectric loss has been measured at higher frequencies. The resistivity of the semiconducting materials was measured, which confirmed that the increasing slope is due to the semiconducting layers. After using conductive tapes to wrap the cable samples, monotonically decreasing losses were measured, corresponding to the actual dielectric frequency response of the XLPE cables. It is concluded that the axial resistance of semiconducting shields have a substantial influence on the dielectric loss of XLPE cables, especially for dielectric response in high frequency range. A device on measuring the loss of such cables is presented

The role of a community pharmacist in diabetes education

A pharmacist is one of few medical professionals in the world to whom a patient or anyone else can go for a consultation or advice without an appointment. They are easily accessed and knowledgeable about a myriad of aspects concerning patients and their medication. It is thus of the utmost importance to take these skills into consideration when it comes to diabetic education. Pharmacists have long-term relationships with most of their chronic patients, which sets a good foundation for mutual trust and respect and better patient compliance

Influence of the temperature on the dielectric properties of epoxy resins

Electrical degradation processes in epoxy resins, such as electrical treeing, were found to be dependent on the temperature at which the experiments were carried out. Therefore, it is of considerable research interest to study the influence of temperature on the dielectric properties of the polymers and to relate the effect of temperature on these properties to the possible electrical degradation mechanisms. In this work, the dielectric properties of two different epoxy resin systems have been characterized via dielectric spectroscopy. The epoxy resins used were bisphenol-A epoxy resins Araldite CY1301 and Araldite CY1311, the later being a modified version of the former with added plasticizer. The CY1301 samples were tested below and above their glass transition temperature, while the CY1311 were tested well above it. Both epoxy systems possess similar behaviour above the glass transition temperature, e.g. in a flexible state, which can be characterized as a low frequency dispersion (LFD). On the other hand, it was found that below the glass transition temperature CY1301 samples have almost “flat” dielectric response in the frequency range considered. The influence of possible interfacial features on the measured results is discussed

Influence of absorbed moisture on the dielectric properties of epoxy resins

The dielectric response of two bisphenol-A epoxy resin systems Araldite CY1301 (Tg ~ 50°C) and Araldite CY1311 (Tg ~0°C) was studied at different levels of absorbed moisture. The dielectric measurements were carried out over the frequency range 1 mHz to 100 kHz and the results were characterised in terms of dc bulk electrical conduction and dielectric processes. The characteristic parameters (frequency and magnitude) of all processes have been found to be moisture dependent. In both resins above the glass transition temperature, absorbed moisture was found to be implicated in the formation of a bulk quasi-dc dielectric response consistent with cluster formation of the absorbed water molecules

The measurement of very low conductivity and dielectric loss in XLPE cables: A possible method to detect degradation due to thermal aging

The dielectric response of crosslinked polyethylene (XLPE) insulated, miniature power cables, extruded with inner and outer semicons, was measured over the frequency range 10-4 to 104 Hz at temperatures from 20 to 100 °C. A dielectric spectrometer was used for the frequency range 10-4 to 10-2 Hz. A bespoke noise-free power supply was constructed and used to measure the dc conductivity and, using a Fourier transform technique, it was also used to measure the very low dielectric tanδ losses encountered at frequencies of 1 to 100 Hz. Tanδ measurements of <;10-5 were found in this frequency range and attributed to a β-mode dielectric relaxation lying above 100 Hz due to motion of chain segments in the amorphous region and an β-mode relaxation lying below 1 Hz window due to twists of chains in the crystal lamellae. The dc conductivity measurements were consistent with those of the dielectric spectrometer and indicate lower dc conductivities in vacuum degassed cables than have been previously reported for XLPE (less than 10-17 S.m-1). The conduction process is thermally activated with an activation energy of approximately 1.1 eV. Higher conductivities were found for non-degassed cables. A transformer ratio bridge was used for measurements in the range 1 to 10 kHz; loss in this region was shown to be due to the series resistance of the semicon layers. Thermal ageing of the cables at 135 °C for 60 days caused significant increases in the conductivity and tanδ and it is considered that such measurements may be a sensitive way of measuring electrical degradation due to thermal aging

Effect of side chains on the dielectric properties of alkyl esters derived from palm kernel oil

Alkyl ester derivatives were synthesized from laboratory purified palm kernel oil. The steps in the synthesis involved transesterification of palm kernel oil to produce a methyl ester, followed by epoxidation and then the grafting of side chains by esterification with propionic and butyric anhydride. The dielectric and thermal properties of the ester derivatives were analyzed and compared with the methyl ester. The melting point of the ester derivatives were found to reduce with side chain attachment and antioxidant improved its thermal stability. The dielectric loss was dominated by mobile charged particles and the chemical modification appeared to increase the rate at which electric double layer was formed at the electrode-liquid interface. The esters possessed excellent breakdown strengths suggesting that the processing to optimize their physical properties did not have a negative influence on their electrical breakdown strength. This product may prove useful as an insulation fluid in Electrical Power Transformers