Sorption and desorption studies of Pb(II) and Ni(II) from aqueous solutions by a new composite based on alginate and magadiite materials

A new composite material based on alginate and magadiite/Di-(2-ethylhexyl) phosphoric acid (CAM-D2EHPA) was successfully prepared by previous impregnation of layered magadiite with D2EHPA extractant, and then immobilized into the alginate matrix. Air dried beads of CAM-D2EHPA were characterized by FTIR and SEM–EDX techniques. The sorbent was used for the separation of lead and nickel from nitrate solutions; the main parameters of sorption such as contact time, pH of the solution, and initial metal concentration were studied. The beads recovered 94% of Pb(II) and 65% of Ni(II) at pH 4 from dilute solutions containing 10 mg L-1 of metal (sorbent dosage, S.D. 1 g L-1). The equilibrium data gave a better fit using the Langmuir model, and kinetic profiles were fitted using a pseudo-second order rate equation. The maximum sorption capacities obtained (at pH 4) were 197 mg g-1 and 44 mg g-1 for lead and nickel, respectively. The regeneration of the sorbent was efficiently carried out with a dilute solution of HNO3 (0.5 M). The composite material was reused in 10 sorption–elution cycles with no significant differences on sorption uptake. A study with synthetic effluents containing an equimolar concentration of both metals indicated a better selectivity towards lead ionsPeer ReviewedPostprint (published version

Competitive adsorption of Cu (II) and Zn (II) on impregnate raw Algerian bentonite and efficiency of extraction

International audienc

Cu (II) Extraction from Sulfate Media by Functionalized Algerian Bentonites

International audienc

Sorption and desorption studies of Pb(II) and Ni(II) from aqueous solutions by a new composite based on alginate and magadiite materials

A new composite material based on alginate and magadiite/Di-(2-ethylhexyl) phosphoric acid (CAM-D2EHPA) was successfully prepared by previous impregnation of layered magadiite with D2EHPA extractant, and then immobilized into the alginate matrix. Air dried beads of CAM-D2EHPA were characterized by FTIR and SEM–EDX techniques. The sorbent was used for the separation of lead and nickel from nitrate solutions; the main parameters of sorption such as contact time, pH of the solution, and initial metal concentration were studied. The beads recovered 94% of Pb(II) and 65% of Ni(II) at pH 4 from dilute solutions containing 10 mg L-1 of metal (sorbent dosage, S.D. 1 g L-1). The equilibrium data gave a better fit using the Langmuir model, and kinetic profiles were fitted using a pseudo-second order rate equation. The maximum sorption capacities obtained (at pH 4) were 197 mg g-1 and 44 mg g-1 for lead and nickel, respectively. The regeneration of the sorbent was efficiently carried out with a dilute solution of HNO3 (0.5 M). The composite material was reused in 10 sorption–elution cycles with no significant differences on sorption uptake. A study with synthetic effluents containing an equimolar concentration of both metals indicated a better selectivity towards lead ionsPeer Reviewe

Cadmium removal by a low-cost magadiite-based material: Characterization and sorption applications

International audienc

Cadmium removal by a low-cost magadiite-based material: Characterization and sorption applications

The sorption of cadmium from nitrate medium at room temperature was carried out using solid phase magadiite and magadiite impregnated with Cyanex 272 [bis(2,4,4-trimethylpentyl)phosphinic acid]. The sorbent materials have been characterized by X-ray diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FTIR), scanning electron microscopy-energy dispersive X-ray analyses (SEM-EDX) and thermogravimetric analysis (TGA/DTG). The UV–vis spectrophotometry technique was used to determine the amount of Cyanex-272 inserted into the solid support. Various parameters such as pH of the aqueous solution, initial Cd(II) concentration and equilibrium time were studied. The sorption data fitted the Sips sorption equation, and the sorption kinetics follows the model of the pseudo-second order. The maximum sorption capacity of Cd(II) was found to be 64.06¿mg¿g-1 and 49.45¿mg¿g-1 (i.e., 0.57 and 0.44¿mmol¿g-1) from magadiite and magadiite-Cyanex 272, respectively. The elution of the materials was performed with 0.1¿M HNO3 solution, and 80% of the initial sorbed cadmium was recovered.Peer Reviewe

Removal of zinc from aqueous solutions using lamellar double hydroxide materials impregnated with Cyanex 272: Characterization and sorption studies

Removal of heavy metals from wastewater is mandatory in order to avoid water pollution of natural reservoirs. In the present study, layered double hydroxide (LDH) materials were evaluated for removal of zinc from aqueous solutions. Materials thus prepared were impregnated with cyanex 272 using the dry method. These materials were characterized through X-ray diffraction (XRD), Fourier transform infrared (FTIR), and thermal analysis. Batch shaking adsorption experiments were performed in order to examine contact time and extraction capacity in the removal process. Results showed that the equilibrium time of Zn (II) extraction is about 4 h for Mg2Al-CO3 and Mg2Al-CO3-cyanex 272, 6 h for Zn2Al-CO3, and 24 h for Zn2Al-CO3-cyanex 272. The experimental equilibrium data were tested for Langmuir, and Freundlich isotherm models. Correlation coefficients indicate that experimental results are in a good agreement with Langmuir’s model for zinc ions. Pseudo-first, second-order, Elovich, and intraparticular kinetic models were used to describe kinetic data. It was determined that removal of Zn2+ was well-fitted by a second-order reaction kinetic. A maximum capacity of 280 mg/g was obtained by Zn2Al-CO3-cyanex 272.This research was funded by the Spanish Ministry of Economy and Competitiveness, MINECO (project Ref: CTM2017-83581-R). The APC was funded by MINECO.Peer Reviewe