Mechanomyographic amplitude and frequency responses during dynamic muscle actions: a comprehensive review

The purpose of this review is to examine the literature that has investigated mechanomyographic (MMG) amplitude and frequency responses during dynamic muscle actions. To date, the majority of MMG research has focused on isometric muscle actions. Recent studies, however, have examined the MMG time and/or frequency domain responses during various types of dynamic activities, including dynamic constant external resistance (DCER) and isokinetic muscle actions, as well as cycle ergometry. Despite the potential influences of factors such as changes in muscle length and the thickness of the tissue between the muscle and the MMG sensor, there is convincing evidence that during dynamic muscle actions, the MMG signal provides valid information regarding muscle function. This argument is supported by consistencies in the MMG literature, such as the close relationship between MMG amplitude and power output and a linear increase in MMG amplitude with concentric torque production. There are still many issues, however, that have yet to be resolved, and the literature base for MMG during both dynamic and isometric muscle actions is far from complete. Thus, it is important to investigate the unique applications of MMG amplitude and frequency responses with different experimental designs/methodologies to continually reassess the uses/limitations of MMG

Wetlands for wastewater treatment and subsequent recycling of treated effluent : a review

Due to water scarcity challenges around the world, it is essential to think about non-conventional water resources to address the increased demand in clean freshwater. Environmental and public health problems may result from insufficient provision of sanitation and wastewater disposal facilities. Because of this, wastewater treatment and recycling methods will be vital to provide sufficient freshwater in the coming decades, since water resources are limited and more than 70% of water are consumed for irrigation purposes. Therefore, the application of treated wastewater for agricultural irrigation has much potential, especially when incorporating the reuse of nutrients like nitrogen and phosphorous, which are essential for plant production. Among the current treatment technologies applied in urban wastewater reuse for irrigation, wetlands were concluded to be the one of the most suitable ones in terms of pollutant removal and have advantages due to both low maintenance costs and required energy. Wetland behavior and efficiency concerning wastewater treatment is mainly linked to macrophyte composition, substrate, hydrology, surface loading rate, influent feeding mode, microorganism availability, and temperature. Constructed wetlands are very effective in removing organics and suspended solids, whereas the removal of nitrogen is relatively low, but could be improved by using a combination of various types of constructed wetlands meeting the irrigation reuse standards. The removal of phosphorus is usually low, unless special media with high sorption capacity are used. Pathogen removal from wetland effluent to meet irrigation reuse standards is a challenge unless supplementary lagoons or hybrid wetland systems are used

Population and Environmental Correlates of Maize Yields in Mesoamerica: a Test of Boserup’s Hypothesis in the Milpa

Using a sample of 40 sources reporting milpa and mucuna-intercropped maize yields in Mesoamerica, we test Boserup’s (1965) prediction that fallow is reduced as a result of growing population density. We further examine direct and indirect effects of population density on yield. We find only mixed support for Boserupian intensification. Fallow periods decrease slightly with increasing population density in this sample, but the relationship is weak. Controlling for other covariates, fallow-unadjusted maize yields first rise then fall with population density. Fallow-adjusted maize yields peak at 390 kg/ha/yr for low population densities (8 persons / km2) and decline to around 280 kg/ha/yr for the highest population densities observed in our dataset. Fallow practices do not appear to mediate the relationship between population density and yield. The multi-level modeling methods we adopt allow for data clustering, accurate estimates of group-level variation, and they generate conditional predictions, all features essential to the comparative study of prehistoric and contemporary agricultural yields

Changes of the force-frequency relationship in human tibialis anterior at fatigue.

This work estimates the influence of the single twitch (ST) parameters changes on specific regions of the force-frequency relationship (FFR) in fatigued human tibialis anterior (TA). In 20 subjects (age 20-40) the TA underwent three stimulation phases: (a) five STs at 1 Hz followed by 5 s stimulation with increasing rate (1-50 Hz, to obtain FFR); (b) fatiguing stimulation (35 Hz for 40 s); (c) same as in "a". By the average STs (mean of the five responses) of a and c phases, the peak twitch (Pt) was calculated. Moreover, after ST normalization to Pt, the maximum contraction rate (MCR) and the maximum relaxation rate (MRR) were computed. By the FFR, normalized to the 50 Hz force, we first defined the threshold frequency (TF) when the force oscillation presented the same value in (a) and (c), and then the areas below the FFR in the 1 Hz-TF and in the TF-50 Hz ranges. RESULTS: In unfatigued and fatigued muscle Pt, and MRR changed from 6.12 +/- 3.08 to 3.27 +/- 1.16 N and from 0.87 +/- 0.13 to 0.65 +/- 0.09% Pt/ms, respectively. MCR did not change significantly. The 1 Hz-TF area ratio (c/a) was > 1 for muscles having fatigued Pt > 60% of its basal value. The TF-50 Hz area ratio (c/a) was mostly below 1. CONCLUSIONS: At fatigue, MRR reduction, leading to a better fusion of muscle mechanical output, is able to compensate, in the 1 Hz-TF frequency range, up to 40% Pt loss; beyond TF, the changes of FFR are related to the degree of force loss indicated by the fatigued Pt

Muscle sound and electromyogram spectrum analysis during exhausting contractions in man

The changes in the soundmyogram (SMG) and electromyogram (EMG) frequency content during exhausting contractions at 20%, 40%, 60% and 80% of the maximal voluntary contraction (MVC) were investigated by the spectral analysis of the SMG and EMG detected from the biceps brachii muscles of 13 healthy men. The root mean squares (rms) of the two signals were also calculated. Throughout contraction the EMG rms always increased while this was true only at 20% MVC for the SMG. A marked decrease was detected at 60% and 80% MVC. With fatigue the EMG spectra presented a compression towards the lower frequencies at all exercise intensities. The SMG showed a more complex behaviour with a transient increase in its frequency content, followed by a continuous compression of the spectra, at 60% and 80% MVC, and a nearly stable frequency content at lower contraction intensities. This study suggested that different aspects of the changes in the motor unit's activation strategy at different levels of exhausting contractions can be monitored by SMG and EMG signals

Muscle-joint unit transfer function derived from torque and surface mechanomyogram in humans using different stimulation protocols.

Torque and laser detected surface mechanomyogram (MMG) analysis after electrical stimulation of human tibialis anterior (TA) of 14 male subjects was aimed to: (a) obtain the dynamic response.; of TA muscle-joint unit from a long (LP, about I h) and short (SP, 12.5 s) stimulation protocol; (b) compare the resulting transfer function parameters from the two signals. The sinusoidal amplitude modulation of a 30 Hz stimulation train (SST) changed the number of the recruited motor units, and hence the isometric torque and the TA surface position in the same fashion. Subject instrumentation and SST amplitude range definition took about 25 min. SP: seven consecutive modulation frequencies (0.4, 6.0, 1.0, 4.5, 1.8, 3.0, and 2.5 Hz). LP: fourteen 5 s long isolated frequencies (0.4, 0.6, 0.8, 1.0, 1.2, 1.4, 1.6, 1.8, 2.0, 2.5, 3.0, 4.0, 5.0, and 6.0 Hz), 5 min rest in between, Poles position (Hz) and added delay (ms) for phase correction with respect to the input sine (parameters of a critically damped 11 order system) were: torque 2.44 +/- 0.27 Hz (SP) or 2.32 +/- 0.33 Hz (LP) and 18.3 +/- 2.2 ms (SP) or 17.2 +/- 4.5 ms (LP); MMG 2.28 +/- 0.30 Hz (SP) or 2.30 +/- 0.44 Hz (LP) and 17.4 +/- 5.6 ms (SP) or 17.4 +/- 6.4 ms (LP). Differences were never statistically significant. Conclusion: it is possible to characterise the in vivo mechanics of muscle-joint unit with a short (few seconds) stimulation protocol affordable in clinical environment using both torque and MMG signals

Spectral analysis of muscular sound during isometric contraction of biceps brachii

The frequency content of muscular sound (MS), detected by placing a contact sensor transducer over the belly of the biceps brachii during 10 isometric contractions of 4 s each [10-100% of maximal voluntary contraction (MVC)] in seven sedentary men, was analyzed by the maximum entropy spectral estimation and the fast Fourier transform methods. With increasing %MVC, the power spectrum of the MS enlarges and tends to be multimodal beyond 30% MVC. Independent of the method, the mean frequency is ~ 11 Hz at the lower tasks, and then it increases up to 15 Hz at 80% MCV and to 22 Hz at 100% MVC. When the effort is increased the relative power in the 15- to 45-Hz bandwidth (range of firing rate of the motor units with fast-twitch fibers) from 20% reaches 55% of the power in the 6- to 45-Hz bandwidth (firing rate range of motor units with slow- and fast-twitch fibers). Our results obtained by the two different modeling approaches confirm the reliability of the sound signal. Moreover, it appears that from the MS the motor unit activation pattern can be retrieved