12 research outputs found
Table S1. Candidate gene lists for Populus salicinoid phenolic glycosides
An Excel file of candidate genes from QTL intervals for the salicinoid phenolic glycosides, salicortin and HCH-salicortin in a backcross population of hybrid cottonwoods (Populus fremontii x P. angustifolia. Each worksheet in the file contains the gene lists for a particular interval. In cases where QTL intervals overlapped on the same chromosome, the +/- 1.3Mb interval pertains to the furthest/nearest point from the chromosome start (i.e. co-occurring peaks at 1Mb and 2Mb would have an interval ranging from 0Mb to 3.3Mb). Each table includes gene name, start and end positions in bp, description. QTL peaks from our study, shared SSR makers from Caseys et al. (2015), and candidate genes are all shown in red text
Abundance of Major Cell Wall Components in Natural Variants and Pedigrees of Populus trichocarpa
The rapid analysis of biopolymers including lignin and sugars in lignocellulosic biomass cell walls is essential for the analysis of the large sample populations needed for identifying heritable genetic variation in biomass feedstocks for biofuels and bioproducts. In this study, we reported the analysis of cell wall lignin content, syringyl/guaiacyl (S/G) ratio, as well as glucose and xylose content by high-throughput pyrolysis-molecular beam mass spectrometry (py-MBMS) for >3,600 samples derived from hundreds of accessions of Populus trichocarpa from natural populations, as well as pedigrees constructed from 14 parents (7 Ă 7). Partial Least Squares (PLS) regression models were built from the samples of known sugar composition previously determined by hydrolysis followed by nuclear magnetic resonance (NMR) analysis. Key spectral features positively correlated with glucose content consisted of m/z 126, 98, and 69, among others, deriving from pyrolyzates such as hydroxymethylfurfural, maltol, and other sugar-derived species. Xylose content positively correlated primarily with many lignin-derived ions and to a lesser degree with m/z 114, deriving from a lactone produced from xylose pyrolysis. Models were capable of predicting glucose and xylose contents with an average error of less than 4%, and accuracy was significantly improved over previously used methods. The differences in the models constructed from the two sample sets varied in training sample number, but the genetic and compositional uniformity of the pedigree set could be a potential driver in the slightly better performance of that model in comparison with the natural variants. Broad-sense heritability of glucose and xylose composition using these data was 0.32 and 0.34, respectively. In summary, we have demonstrated the use of a single high-throughput method to predict sugar and lignin composition in thousands of poplar samples to estimate the heritability and phenotypic plasticity of traits necessary to develop optimized feedstocks for bioenergy applications
Table S2. Proposed SPG candidate genes
The table summarizes gene information for fourteen candidate genes that stand out with regard to their potential roles in SPG synthesis or regulation. Data are arranged by transcript name, gene name, gene start and end positions in bp, and a general description
Table S2. Proposed SPG candidate genes
The table summarizes gene information for fourteen candidate genes that stand out with regard to their potential roles in SPG synthesis or regulation. Data are arranged by transcript name, gene name, gene start and end positions in bp, and a general description
Table S1. Candidate gene lists for Populus salicinoid phenolic glycosides
An Excel file of candidate genes from QTL intervals for the salicinoid phenolic glycosides, salicortin and HCH-salicortin in a backcross population of hybrid cottonwoods (Populus fremontii x P. angustifolia. Each worksheet in the file contains the gene lists for a particular interval. In cases where QTL intervals overlapped on the same chromosome, the +/- 1.3Mb interval pertains to the furthest/nearest point from the chromosome start (i.e. co-occurring peaks at 1Mb and 2Mb would have an interval ranging from 0Mb to 3.3Mb). Each table includes gene name, start and end positions in bp, description. QTL peaks from our study, shared SSR makers from Caseys et al. (2015), and candidate genes are all shown in red text
Recommended from our members
Wavelet-Based Genomic Signal Processing for Centromere Identification and Hypothesis Generation.
Various 'omics data types have been generated for Populus trichocarpa, each providing a layer of information which can be represented as a density signal across a chromosome. We make use of genome sequence data, variants data across a population as well as methylation data across 10 different tissues, combined with wavelet-based signal processing to perform a comprehensive analysis of the signature of the centromere in these different data signals, and successfully identify putative centromeric regions in P. trichocarpa from these signals. Furthermore, using SNP (single nucleotide polymorphism) correlations across a natural population of P. trichocarpa, we find evidence for the co-evolution of the centromeric histone CENH3 with the sequence of the newly identified centromeric regions, and identify a new CENH3 candidate in P. trichocarpa
Large effect quantitative trait loci for salicinoid phenolic glycosides in Populus: Implications for gene discovery
Genomic studies have been used to identify genes underlying many important plant secondary metabolic pathways. However, genes for salicinoid phenolic glycosides (SPGs)âecologically important compounds with significant commercial, cultural, and medicinal applicationsâremain largely undescribed. We used a linkage map derived from a full-sib population of hybrid cottonwoods (Populus spp.) to search for quanti- tative trait loci (QTL) for the SPGs salicortin and HCH-salicortin. SSR markers and primer sequences were used to anchor the map to the V3.0 P. trichocarpa genome. We discovered 21 QTL for the two traits, including a major QTL for HCH-salicortin (R2 = .52) that colocated with a QTL for salicortin on chr12. Using the V3.0 Populus genome sequence, we identified 2,983 annotated genes and 1,480 genes of un- known function within our QTL intervals. We note ten candidate genes of interest, including a BAHD-type acyltransferase that has been potentially linked to Populus SPGs. Our results complement other recent studies in Populus with implications for gene discovery and the evolution of defensive chemistry in a model genus. To our knowledge, this is the first study to use a full-sib mapping population to identify QTL intervals and gene lists associated with SPGs
Data from: Large effect quantitative trait loci for salicinoid phenolic glycosides in Populus: implications for gene discovery
Genomic studies have been used to identify genes underlying many important plant secondary metabolic pathways. However, genes for salicinoid phenolic glycosides (SPGs)âecologically important compounds with significant commercial, cultural, and medicinal applicationsâremain largely undescribed. We used a linkage map derived from a fullâsib population of hybrid cottonwoods (Populus spp.) to search for quantitative trait loci (QTL) for the SPGs salicortin and HCHâsalicortin. SSR markers and primer sequences were used to anchor the map to the V3.0 P. trichocarpa genome. We discovered 21 QTL for the two traits, including a major QTL for HCHâsalicortin (R2 = .52) that colocated with a QTL for salicortin on chr12. Using the V3.0 Populus genome sequence, we identified 2,983 annotated genes and 1,480 genes of unknown function within our QTL intervals. We note ten candidate genes of interest, including a BAHDâtype acyltransferase that has been potentially linked to PopulusSPGs. Our results complement other recent studies in Populus with implications for gene discovery and the evolution of defensive chemistry in a model genus. To our knowledge, this is the first study to use a fullâsib mapping population to identify QTL intervals and gene lists associated with SPGs
Large effect quantitative trait loci for salicinoid phenolic glycosides in Populus: Implications for gene discovery
Genomic studies have been used to identify genes underlying many important plant secondary metabolic pathways. However, genes for salicinoid phenolic glycosides (SPGs)âecologically important compounds with significant commercial, cultural, and medicinal applicationsâremain largely undescribed. We used a linkage map derived from a full-sib population of hybrid cottonwoods (Populus spp.) to search for quanti- tative trait loci (QTL) for the SPGs salicortin and HCH-salicortin. SSR markers and primer sequences were used to anchor the map to the V3.0 P. trichocarpa genome. We discovered 21 QTL for the two traits, including a major QTL for HCH-salicortin (R2 = .52) that colocated with a QTL for salicortin on chr12. Using the V3.0 Populus genome sequence, we identified 2,983 annotated genes and 1,480 genes of un- known function within our QTL intervals. We note ten candidate genes of interest, including a BAHD-type acyltransferase that has been potentially linked to Populus SPGs. Our results complement other recent studies in Populus with implications for gene discovery and the evolution of defensive chemistry in a model genus. To our knowledge, this is the first study to use a full-sib mapping population to identify QTL intervals and gene lists associated with SPGs
Recommended from our members
Hardwood Tree Genomics: Unlocking Woody Plant Biology.
Woody perennial angiosperms (i.e., hardwood trees) are polyphyletic in origin and occur in most angiosperm orders. Despite their independent origins, hardwoods have shared physiological, anatomical, and life history traits distinct from their herbaceous relatives. New high-throughput DNA sequencing platforms have provided access to numerous woody plant genomes beyond the early reference genomes of Populus and Eucalyptus, references that now include willow and oak, with pecan and chestnut soon to follow. Genomic studies within these diverse and undomesticated species have successfully linked genes to ecological, physiological, and developmental traits directly. Moreover, comparative genomic approaches are providing insights into speciation events while large-scale DNA resequencing of native collections is identifying population-level genetic diversity responsible for variation in key woody plant biology across and within species. Current research is focused on developing genomic prediction models for breeding, defining speciation and local adaptation, detecting and characterizing somatic mutations, revealing the mechanisms of gender determination and flowering, and application of systems biology approaches to model complex regulatory networks underlying quantitative traits. Emerging technologies such as single-molecule, long-read sequencing is being employed as additional woody plant species, and genotypes within species, are sequenced, thus enabling a comparative ("evo-devo") approach to understanding the unique biology of large woody plants. Resource availability, current genomic and genetic applications, new discoveries and predicted future developments are illustrated and discussed for poplar, eucalyptus, willow, oak, chestnut, and pecan