Relationship between pulmonary exacerbations and daily physical activity in adults with cystic fibrosis

The aim of this study was to examine the relationship between pulmonary exacerbations and physical activity (PA) in adults with cystic fibrosis (CF)

The view from elsewhere: perspectives on ALife Modeling

Many artificial life researchers stress the interdisciplinary character of the field. Against such a backdrop, this report reviews and discusses artificial life, as it is depicted in, and as it interfaces with, adjacent disciplines (in particular, philosophy, biology, and linguistics), and in the light of a specific historical example of interdisciplinary research (namely cybernetics) with which artificial life shares many features. This report grew out of a workshop held at the Sixth European Conference on Artificial Life in Prague and features individual contributions from the workshop's eight speakers, plus a section designed to reflect the debates that took place during the workshop's discussion sessions. The major theme that emerged during these sessions was the identity and status of artificial life as a scientific endeavor

A Low-Cost FPGA-Based Test and Diagnosis Architecture for SRAMs

The continues improvement of manufacturing technologies allows the realization of integrated circuits containing an ever increasing number of transistors. A major part of these devices is devoted to realize SRAM blocks. Test and diagnosis of SRAM circuits are therefore an important challenge for improving quality of next generation integrated circuits. This paper proposes a flexible platform for testing and diagnosis of SRAM circuits. The architecture is based on the use of a low cost FPGA based board allowing high diagnosability while keeping costs at a very low leve

"All on short" prosthetic-implant supported rehabilitations

Objectives. Short implants are increasing their popularity among clinicians who want to fulfill the constant demanding of fixed prosthetic solutions in edentulous jaws. The aim of this report was to propose a new possibility to project and realize an occlusal guided implant cross-arch prosthesis supported by ultra-short implants, describing it presented an edentulous mandible case report. Methods. A 61-year-old, Caucasian, female patient who attended the dental clinic of the University of L’Aquila presented with edentulous posterior inferior jaw and periodontitis and periimplantitis processes in the anterior mandible. The remaining tooth and the affected implant were removed. Six 4-mm-long implants were placed to support a cross-arch metal-resin prosthesis. Results. At 1-year follow-up clinical and radiological assessment showed a good osseointegration of the fixtures and the patient was satisfied with the prosthesis solution. Conclusion. The method, even if it requires further validation, seems to be a valid aid in solving lower edentulous clinical cases, and appears less complex and with more indications of other proposals presented in the current clinical literature. Our case report differs from the current technique All-on-Four, which uses four implants in the mandible to support overdenture prosthesis, assuring a very promising clinical resul

An Innovative Lens Type FinLine to Microstrip Transition

Due to the disadvantages of vacuum tubes in terms of warm-up time, size, and highvoltage needs, solid-state power amplifiers (SSPAs) with gallium nitride (GaN) monolithic microwave integrated circuits (MMICs) are the key solution for power levels up to some kilowatts in continuous wave. An SSPA is the most convenient solution for these RF power levels due to its low weight, small size, negligible warm-up time, low-voltage operation, and high reliability. Spatial power amplifiers (SPAs) combining techniques are the best candidates for SSPAs due to the intrinsic low attenuation in dividing and combining functions. SPAs mainly use two types of probes: transverse and longitudinal, such as FinLines. This paper describes a broadband FinLine to microstrip (FLuS) transition based on dielectric lens theory. Comparative simulations with traditional FinLine transitions show a significant improvement in matching performances and a very significant increase in mechanical resistance of the transition. The proposed innovative FLuS uses a substrate shaping designed according to dielectric lens theory. Frequency simulations of a FLuS inside the WR22 waveguide are shown. These evidence the better performances of this transition than the classic FLuS transition using quarter-wave transformer (QWT) matching. A Q band spatial power combiner with dielectric lens FLuS was made and measured, showing the excellent performances of this innovative FLuS transition

Innovative Mode Enhancement for High Power Coaxial Vircators

The size and weight of a high power microwave (HPM) source can make a difference in strategic use. The compactness of the virtual cathode oscillator (vircator) is undoubtedly the most significant advantage of this device. Civil industry and agriculture can use it to treat objects, food, and soils for disinfestation and disinfection. Vircators could also generate electromagnetic pulses (EMPs) to force the arrest of vehicles and drones; EMPs could inhibit or activate improvised explosive devices (IEDs). The coaxial type vircator is a highly compact device. Due to its symmetric geometry, coaxial vircator is typically designed to work with a TM01 mode. Still, when radiated into space, this mode gives maximum RF energy away from the antenna axis, a situation not desired. Instead, the TE11 is convenient in applications involving precise antenna pointing since this mode gives a maximum RF energy precisely aligned to the antenna axis. By studying Mathieu functions applied to elliptical waveguides, we improve the performances of a TE11 mode coaxial vircator using an elliptic drift tube (EDT). This is a completely innovative solution to reduce the mode competition inside the coaxial vircator. The rms and peak output power efficiency of the EDT coaxial vircator were measured on the TE11 mode, obtaining the values of 6.1% and 10%, respectively, with a peak power of 450 MW in a highly compact device

Virtual prototype of innovative ka-band power amplifier based on waveguide polarizer

This paper outlines an innovative approach to design a spatial power-combining structure based on waveguide polarizers. It presents the 3D CAD model of the new structure with the transversal probes and considerations in positioning and optimization of them. Exploiting the transformation of the dominant input mode TE10 into an elliptically polarized wave, provided by the polarizer, it has been possible to achieve a division of power by eight, completely carried out in space. With the insertion of the transversal probes made by microstrips, the RF signal can be sent to the MMIC solid state power amplifiers, and then recombined in the output section. Thanks to the large number of power divisions made in the waveguide section, the insertion loss of the power divider/combiner is less than 0.5 dB across the 32-34 GHz band, achieving a great power density as well. At the authors’ best knowledge, this is the first work where a waveguide polarizer is used in Spatial Power Combining technology

Defective Behaviour of an 8T SRAM Cell with Open Defects

The defective behaviour of an 8T SRAM cell with open defects is analyzed. Full and resistive open defects have been considered in the electrical characterization of the defective cell. Due to the similarity between the classical 6T SRAM cell and the 8T cell, only defects affecting the read port transistors have been considered. In the work, it is shown how an open in a defective cell may influence the correct operation of a victim cell sharing the same read circuitry. Also, it is shown that the sequence of bits written on the defective cell prior to a read action can mask the presence of the defect. Different orders of critical resistance have been found depending on the location of the open defect. A 45nm technology has been used for the illustrative example presented in the wor

Combined effects of electromagnetic fields on immune and nervous responses.

In technologically developed countries, there is concern about hazards from electromagnetic fields (EMFs). Several studies have reported that immune and neuroendocrine systems exert an integrated response to EMF exposure. The aim of this review is to summarize the results of studies on the effect of low and high frequency EMF on immune and neuroendocrine systems on which our research group has been working for several years

Cap rock efficiency of geothermal systems in fold-and-thrust belts: Evidence from paleo-thermal and structural analyses in Rosario de La Frontera geothermal area (NW Argentina)

Cap rock characterization of geothermal systems is often neglected despite fracturing may reduce its efficiency and favours fluid migration. We investigated the siliciclastic cap rock of Rosario de La Frontera geothermal system (NW Argentina) in order to assess its quality as a function of fracture patterns and related thermal alteration. Paleothermal investigations (XRD on fine-grained fraction of sediments, organic matter optical analysis and fluid inclusions on veins) and 1D thermal modelling allowed us to distinguish the thermal fingerprint associated to sedimentary burial from that related to fluid migration. The geothermal system is hosted in a Neogene N-S anticline dissected by high angle NNW- and ENE-striking faults. Its cap rock can be grouped into two quality categories: • rocks acting as good insulators, deformed by NNW–SSE and E–W shear fractures, NNE-SSW gypsum- and N-S-striking calcite-filled veins that developed during the initial stage of anticline growth. Maximum paleo-temperatures (< 60 °C) were experienced during deposition to folding phases.• rocks acting as bad insulators, deformed by NNW-SSE fault planes and NNW- and WNW-striking sets of fractures associated to late transpressive kinematics. Maximum paleo-temperatures higher than about 115 °C are linked to fluid migration from the reservoir to surface (with a reservoir top at maximum depths of 2.5 km) along fault damage zones.This multi-method approach turned out to be particularly useful to trace the main pathways of hot fluids and can be applied in blind geothermal systems where either subsurface data are scarce or surface thermal anomalies are lacking.Fil: Maffucci, R.. Universita Degli Studi Della Tuscia; Italia. Universita Degli Studi Roma Tre; ItaliaFil: Corrado, Sveva. Universita Degli Studi Roma Tre; ItaliaFil: Aldega, L.. Instituto de Investigaciones Universitarias Roma la Sapienza; ItaliaFil: Bigi, S.. Instituto de Investigaciones Universitarias Roma la Sapienza; ItaliaFil: Chiodi, Agostina Laura. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Salta. Instituto de Investigaciones en Energía no Convencional. Universidad Nacional de Salta. Facultad de Ciencias Exactas. Departamento de Física. Instituto de Investigaciones en Energía no Convencional; ArgentinaFil: Di Paolo, L.. Eni E&P Division; ItaliaFil: Giordano, G.. Universita Degli Studi Roma Tre; ItaliaFil: Invernizzi, C.. Universita Degli Di Camerino; Itali