410 research outputs found
Spatially explicit assessment of roundwood and logging residues availability and costs for the EU28
Competition for woody biomass between material and energy uses is expected to further increase in the future, due to the limited availability of forest resources and increasing demand of wood for material and bioenergy. Currently, methodological approaches for modeling wood production and delivery costs from forest to industrial gates are missing. This study combines forest engineering, geographically explicit information, environmental constraints and economics in a bottom-up approach to assess cost–supply curves. The estimates are based on a multitude of wood supply systems that were assigned according to geographically explicit forestry characteristics. For each harvesting and transportation system, efficiencies were modeled according to harvesting sites and main delivery hubs. The cost–supply curves for roundwood and logging residues as estimates for current time and for the future (2030) show that there are large regional differences in the potential to increase extraction in the EU28. In most EU Member States, the costs of logging residues extraction increase exponentially already for low levels of mobilization, while extraction of roundwood can be increased to a larger extent within reasonable costs (30–40 $/m3). The large differences between countries in their harvest potential highlight the importance of spatially explicit analyses
Distribution, characteristics and potential of biomass-dense thinning forests in Sweden
Understanding the characteristics of unutilized biomass resources, such as small-diameter trees from biomass-dense thinning forests (BDTF) (non-commercially-thinned forests), can provide important information for developing a bio-based economy. The aim of this study was to describe the areal distribution, characteristics (biomass of growing stock, tree height, etc.) and harvesting potential of BDTF in Sweden. A national forest inventory plot dataset was imported into a geographical information system and plots containing BDTF were selected by applying increasingly stringent constraints. Results show that, depending on the constraints applied, BDTF covers 9-44% (2.1-9.8 M ha) of the productive forest land area, and contains 7-34% of the total growing stock (119-564 M OD t), with an average biomass density of 57 OD t ha^-1. Of the total BDTF area, 65% is located in northern Sweden and 2% corresponds to set-aside farmlands. Comparisons with a study from 2008 indicate that BDTF area has increased by at least 4% (about 102 000 ha), in line with general trends for Sweden and Europe. Analyses revealed that the technical harvesting potential of delimbed stemwood (over bark, including tops) from BDTF ranges from 3.0 to 6.1 M OD t yr^-1 (7.5 to 15.1 M m^3 yr^-1), while the potential of whole-tree harvesting ranges from 4.3 to 8.7 M OD t yr^-1 (10.2 to 20.6 M m3 yr^-1) depending on the scenario considered. However, further technological developments of the harvest and supply systems are needed to utilize the full potential of BDTF
Integrated supply of stemwood and residual biomass to forest-based biorefineries
The demand for forest biomass as raw material for a wide range of products in the developing bioeconomy is expected to increase. Along with a constant pressure on forestry to increase its productivity, this development has led to the search for new procurement methods and new assortments. The present study assessed innovative supply chain practices, with a particular focus on the integrated supply of stemwood and residual tree parts. The assortments considered included tree sections, long tops, saw logs with stump cores and small whole trees from thinnings. The assessment included geographically explicit modelling of the supply chain operations and estimation of supply cost and energy use for three industrial locations in Northern Sweden. The innovative supply chains were compared to conventional, separate, harvest of stemwood and logging residues. We conclude that integrated harvest of tops and branches with stemwood assortments, as well as whole-tree harvest in early thinnings, has a significant potential to reduce the supply cost for the non-stemwood assortments. Stump wood generally remains the most expensive assortment. The energy use analysis confirms earlier research showing that the energy input is relatively small compared to the energy content of the harvested feedstock
Benchmarking Technical and Cost Factors in Forest Felling and Processing Operations in Different Global Regions during the Period 2013-2014
In a global bioeconomy, benchmarking costs is essential in the evaluation of current forest harvesting systems and addressing decisions on the most efficient supply chains for available forest resources. Benchmarking cost rates in forestry is challenging, due to a lack of harmonized terminology and difficulties in collecting information on comparable forest technologies. This study provides a first-time series of cost factors to be used when modeling and evaluating the cost competitiveness of forest felling and processing operations on a global scale. It is based on an expert survey using a standardized method of data collection. This benchmarking identifies and updates the knowledge of technical and socio-economic factors capable of influencing the cost rates of forest felling and processing operations across different regions. This study is expected to act as a reference for larger investigations, and for regular updates, with the aim to provide current data that can be used by forest practitioners and decision makers for improving their cost efficiency and for designing future supply systems more effectively
826. Transduction of Human Hematopoietic Stem Cells by RD114-TR-Pseudotyped Lentiviral Vectors
HIV-1-derived lentiviral vectors are efficiently pseudotyped by a chimeric envelope (RD114-TR) encoding the extracellular and transmembrane domains of the FLV RD114 glycoprotein fused to cytoplasmic tail (TR) of the MLV 4070A amphotropic glycoprotein. RD114-TR pseudotyped vectors may be concentrated by centrifugation, are resistant to complement inactivation, and are of particular interest for both ex vivo and in vivo gene therapy applications. We carried out a comparative analysis of VSV-G and RD114-TR-pseudotyped lentiviral vectors in transducing human cord blood-derived CD34+ hematopoietic stem/progenitor cells. Transduction efficiency was comparatively analysed in CD34+ cells in liquid culture, in the progeny of CD34+ clonogenic progenitors in semi-solid culture, and in the progeny of CD34+ repopulating stem cells after xeno-transplantation in NOD-SCID mice. In all cases, RD114-TR-pseudotyped vectors transduced hematopoietic cells at lower m.o.i., resulting in lower toxicity and more efficient stable transduction at comparable vector copy number per genome. Potential changes in CD34+ cells transcription profile and phenotype upon transduction with RD114-TR or VSV-G-pseudotyped vectors was investigated by Affymetrix Gene Chips microarray analysis. We found no significant difference in gene expression patterns between mock-RD114-TR and VSV-G-transduced cells. Our study show that the biology of repopulating hematopoietic stem cells and their progeny is not affected by transduction with RD114-TR-pseudotyped lentiviral vectors
Increasing crop production in Russia and Ukraine—regional and global impacts from intensification and recultivation
Russia and Ukraine are countries with relatively large untapped agricultural potentials, both in terms of abandoned agricultural land and substantial yield gaps. Here we present a comprehensive assessment of Russian and Ukrainian crop production potentials and we analyze possible impacts of their future utilization, on a regional as well as global scale. To this end, the total amount of available abandoned land and potential yields in Russia and Ukraine are estimated and explicitly implemented in an economic agricultural sector model. We find that cereal (barley, corn, and wheat) production in Russia and Ukraine could increase by up to 64% in 2030 to 267 million tons, compared to a baseline scenario. Oilseeds (rapeseed, soybean, and sunflower) production could increase by 84% to 50 million tons, respectively. In comparison to the baseline, common net exports of Ukraine and Russia could increase by up to 86.3 million tons of cereals and 18.9 million tons of oilseeds in 2030, representing 4% and 3.6% of the global production of these crops, respectively. Furthermore, we find that production potentials due to intensification are ten times larger than potentials due to recultivation of abandoned land. Consequently, we also find stronger impacts from intensification at the global scale. A utilization of crop production potentials in Russia and Ukraine could globally save up to 21 million hectares of cropland and reduce average global crop prices by more than 3%
The Effect of Alternative Forest Management Models on the Forest Harvest and Emissions as Compared to the Forest Reference Level
Background and Objectives: Under the Paris Agreement, the European Union (EU) sets rules for accounting the greenhouse gas emissions and removals from forest land (FL). According to these rules, the average FL emissions of each member state in 2021–2025 (compliance period 1, CP1) and in 2026–2030 (compliance period 2, CP2) will be compared to a projected forest reference level (FRL). The FRL is estimated by modelling forest development under fixed forest management practices, based on those observed in 2000–2009. In this context, the objective of this study was to estimate the effects of large-scale uptake of alternative forest management models (aFMMs), developed in the ALTERFOR project (Alternative models and robust decision-making for future forest management), on forest harvest and forest carbon sink, considering that the proposed aFMMs are expanded to most of the suitable areas in EU27+UK and Turkey. Methods: We applied the Global Forest Model (G4M) for projecting the harvest and sink with the aFMMs and compared our results to previous FRL projections. The simulations were performed under the condition that the countries should match the harvest levels estimated for their FRLs as closely as possible. A representation of such aFMMs as clearcut, selective logging, shelterwood logging and tree species change was included in G4M. The aFMMs were modeled under four scenarios of spatial allocation and two scenarios of uptake rate. Finally, we compared our results to the business as usual. Results: The introduction of the aFMMs enhanced the forest sink in CP1 and CP2 in all studied regions when compared to the business as usual. Conclusions: Our results suggest that if a balanced mixture of aFMMs is chosen, a similar level of wood harvest can be maintained as in the FRL projection, while at the same time enhancing the forest sink. In particular, a mixture of multifunctional aFMMs, like selective logging and shelterwood, could enhance the carbon sink by up to 21% over the ALTERFOR region while limiting harvest leakages
Spatially explicit LCA analysis of biodiversity losses due to different bioenergy policies in the European Union
In this study, the potential global loss of species directly associated with land use in the EU and due to trade with other regions is computed over time, in order to reveal differences in impacts between the considered alternatives of plausible bioenergy policies development in the EU.
The spatially explicit study combines a life cycle analysis (LCA) for biodiversity impact assessment with a global high resolution economic land use model. Both impacts of domestic land use and impacts through imports were included for estimating the biodiversity footprint of the member states of the (EU28). The analyzed scenarios assumed similar biomass demand until 2020 but differed thereafter, from keeping the growth of demand for bioenergy constant (CONST), to a strong increase of bioenergy in line with the EU target of decreasing greenhouse gas (GHG) emissions by 80% by 2050 (EMIRED) and with the baseline (BASE) scenario falling between the other two.
As a general trend, the increasing demand for biomass was found to have substantial impact on biodiversity in all scenarios, while the differences between the scenarios were found to be modest. The share caused by imports was 15% of the overall biodiversity impacts detected in this study in the year 2000, and progressively increased to 24% to 26% in 2050, depending on the scenario. The most prominent future change in domestic land use in all scenarios was the expansion of perennial cultivations for energy. In the EMIRED scenario, there is a larger expansion of perennial cultivations and a smaller expansion of cropland in the EU than in the other two scenarios. As the biodiversity damage is smaller for land used for perennial cultivations than for cropland, this development decreases the internal biodiversity damage per unit of land. At the same time, however, the EMIRED scenario also features the largest outsourcing of damage, due to increased import of cropland products from outside the EU for satisfying the EU food demand. These two opposite effects even out each other, resulting in the total biodiversity damage for the EMIRED scenario being only slightly higher than the other two scenarios.
The results of this study indicate that increasing cultivation of perennials for bioenergy and the consequent decrease in the availability of cropland for food production in the EU may lead to outsourcing of agricultural products supply to other regions. This development is associated with a leakage of biodiversity damages to species-rich and vulnerable regions outside the EU.
In the case of a future increase in bioenergy demand, the combination of biomass supply from sustainable forest management in the EU, combined with imported wood pellets and cultivation of perennial energy crops, appears to be less detrimental to biodiversity than expansion of energy crops in the EU
- …