X-ray pushing of a mechanical microswing

Nanoelectromechanical Systems (NEMS) are among the best candidates to measure interactions at nanoscale [1-6], especially when resonating oscillators are used with high quality factor [7, 8]. Despite many efforts [9, 10], efficient and easy actuation in NEMS remains an issue [11]. The mechanism that we propose, thermally mediated Center Of Mass (COM) displacements, represents a new actuation scheme for NEMS and MEMS. To demonstrate this scheme efficiency we show how mechanical nanodis- placements of a MEMS is triggered using modulated X-ray microbeams. The MEMS is a microswing constituted by a Ge microcrystal attached to a Si microcantilever. The interaction is mediated by the Ge absorption of the intensity modulated X-ray microbeam impinging on the microcrystal. The small but finite thermal expansion of the Ge microcrystal is large enough to force a nanodisplacement of the Ge microcrystal COM glued on a Si microlever. The inverse mechanism can be envisaged: MEMS can be used to shape X-ray beams. A Si microlever can be a high frequency X-ray beam chopper for time studies in biology and chemistry.Comment: 5 pages, 4 figur

X-ray Raman scattering study of aligned polyfluorene

We present a non-resonant inelastic x-ray scattering study at the carbon K-edge on aligned poly[9,9-bis(2-ethylhexyl)-fluorene-2,7-diyl] and show that the x-ray Raman scattering technique can be used as a practical alternative to x-ray absorption measurements. We demonstrate that this novel method can be applied to studies on aligned $\pi$-conjugated polymers complementing diffraction and optical studies. Combining the experimental data and a very recently proposed theoretical scheme we demonstrate a unique property of x-ray Raman scattering by performing the symmetry decomposition on the density of unoccupied electronic states into $s$- and $p$-type symmetry contributions.Comment: 19 pages, 8 figure

The European Photon Imaging Camera on XMM-Newton: The MOS Cameras

The EPIC focal plane imaging spectrometers on XMM-Newton use CCDs to record the images and spectra of celestial X-ray sources focused by the three X-ray mirrors. There is one camera at the focus of each mirror; two of the cameras contain seven MOS CCDs, while the third uses twelve PN CCDs, defining a circular field of view of 30 arcmin diameter in each case. The CCDs were specially developed for EPIC, and combine high quality imaging with spectral resolution close to the Fano limit. A filter wheel carrying three kinds of X-ray transparent light blocking filter, a fully closed, and a fully open position, is fitted to each EPIC instrument. The CCDs are cooled passively and are under full closed loop thermal control. A radio-active source is fitted for internal calibration. Data are processed on-board to save telemetry by removing cosmic ray tracks, and generating X-ray event files; a variety of different instrument modes are available to increase the dynamic range of the instrument and to enable fast timing. The instruments were calibrated using laboratory X-ray beams, and synchrotron generated monochromatic X-ray beams before launch; in-orbit calibration makes use of a variety of celestial X-ray targets. The current calibration is better than 10% over the entire energy range of 0.2 to 10 keV. All three instruments survived launch and are performing nominally in orbit. In particular full field-of-view coverage is available, all electronic modes work, and the energy resolution is close to pre-launch values. Radiation damage is well within pre-launch predictions and does not yet impact on the energy resolution. The scientific results from EPIC amply fulfil pre-launch expectations.Comment: 9 pages, 11 figures, accepted for publication in the A&A Special Issue on XMM-Newto

Influence of screw dislocations on the orientation of a sheared lamellar phase

We have investigated the role of screw dislocations defects in a lyotropic lamellar phase of the mixed DMPC/\chem{C_{12}E_5}/water system using microscopy and scattering techniques. Several of the usual shear-induced orientations of the lamellar phase were observed as a function of temperature and shear rate. It is suggested that the corresponding dynamical transitions are consistent with a variation in size of the defects

Lamellar-to-nematic phase transition in a lipid-surfactant mixture

A lyotropic system, consisting of a lecithin (DMPC) and a non-ionic surfactant (C12E5) in water was studied. The system exhibits a lamellar-to-nematic phase transition. The nematic phase appears as the temperature is decreased and only exists in a very limited temperature and concentration range, for specific lipid-to-surfactant ratios. While a lamellar phase is found at higher temperatures in both mixed and pure C12E5 systems, the transition to the nematic phase at lower temperatures coincides with a micellar phase in the pure C12E5 system. The transition appears to be driven by the strong temperature dependence of the surfactant film spontaneous curvature. The structural properties of the lamellar phase close to the lamellar-to-nematic boundary have been studied by polarised light microscopy and small-angle neutron and X-ray scattering experiments. The signature of a helical defect with Burgers vector of magnitude 2 is apparent in our data, close to the lamellar-to-nematic phase transition. The proliferation of screw dislocations in the lamellar phase might be a plausible mechanism for driving this transition

On the front and back side quantum efficiency differences in semi-transparent organic solar cells and photodiodes

International audienceThe External Quantum Efficiency (EQE) of semi-transparent Bulk Hetero-Junction (BHJ) organic photodiodes processed in air shows significant differences when measured from the front or back side contacts. This difference was found significantly reduced when decreasing the active layer thickness or by applying a negative bias. This work brings new elements to help understanding this effect, providing a large set of experiments featuring different applied voltages, active layers, process conditions and electron and hole layers. By the mean of detailed electrical simulations, all these measurements have been found consistent with the mechanisms of irreversible photo-oxidation, modeled as deep trap states (and not as p type doping). The EQE measurement from front and back side is thus a simple and efficient way of monitoring the presence and amplitude of oxygen contamination in BHJ organic solar cells and photodiodes