593 research outputs found
Vibrational and Thermal Properties of ZnX (X=Se, Te): Density Functional Theory (LDA and GGA) versus Experiment
We calculated the phonon dispersion relations of ZnX (X=Se, Te) employing ab
initio techniques. These relations have been used to evaluate the temperature
dependence of the respective specific heats of crystals with varied isotopic
compositions. These results have been compared with mea- surements performed on
crystals down to 2 K. The calculated and measured data are generally in
excellent agreement with each other. Trends in the phonon dispersion relations
and the correspond- ing densities of states for the zinc chalcogenide series of
zincblende-type materials are discussed.Comment: 10 pages, submitted to PR
Analysis and application of digital spectral warping in analog and mixed-signal testing
Spectral warping is a digital signal processing transform which shifts the frequencies contained within a signal along the frequency axis. The Fourier transform coefficients of a warped signal correspond to frequency-domain 'samples' of the original signal which are unevenly spaced along the frequency axis. This property allows the technique to be efficiently used for DSP-based analog and mixed-signal testing. The analysis and application of spectral warping for test signal generation, response analysis, filter design, frequency response evaluation, etc. are discussed in this paper along with examples of the software and hardware implementation
Cerenkov generation of high-frequency confined acoustic phonons in quantum wells
We analyze the Cerenkov emission of high-frequency confined acoustic phonons
by drifting electrons in a quantum well. We find that the electron drift can
cause strong phonon amplification (generation). A general formula for the gain
coefficient, alpha, is obtained as a function of the phonon frequency and the
structure parameters. The gain coefficient increases sharply in the short-wave
region. For the example of a Si/SiGe/Si device it is shown that the
amplification coefficients of the order of hundreds of 1/cm can be achieved in
the sub-THz frequency range.Comment: 4 pages, 2 figures. Submitted to AP
P02.102. Evaluating the role of expectancy during stress-reducing aromatherapy in healthy older adults
Aqueous vapour substitution for hydrogen in the process of pyrolysis
In order to decrease hydrocarbons fractional pressure in the process of ethylene pyrolysis, 0.5-1.5 kilograms of aqueous vapour is added to each kilo of feedstock. In the pyrolysis of hydrocarbon feed, a considerable part of the process' power consumption is connected with water vaporization; heating up of the diluent to 800°C and more with the subsequent condensation. The aim of this work is to reduce specific energy consumption and improve selectivity to ethylene of pyrolysis process. The same hydrocarbons fractional pressure can be created as during diluting by aqueous vapour if we use hydrogen as a diluent with its mass 9 times less. It was found that if hydrogen is purged to the furnace inlet under different feedstock temperatures prior to the pyrolitic reaction, hydrogen will become a homogeneous catalyst for the subsequent radical-chain reactions. The depth of the reaction (according to Korzun and Magaril in Thermal processes of refining 2008) will be greater, under otherwise equal conditions, than without hydrogen. Specific heat energy consumption for the production of ethylene, as well as for the amount of ethylene and propylene, with aqueous vapour substitution to hydrogen decreases. When replacing the vapour for a considerably smaller amount of hydrogen, the latter is involved in a radical chain process, providing greater selectivity for ethylene production, thereby increasing the yield of ethylene at 15% relative. As a result, ethylene production costs are significantly reduced. © 2014 WIT Press.International Journal of Safety and Security Engineering;International Journal of Sustainable Development and Planning;WIT Transactions on Ecology and the Environmen
On the Model Calculation of the Excitonic-Like States and Their Possible Role in Autocatalytic Processes
Defect cluster recognition system for fabricated semiconductor wafers
The International Technology Roadmap for Semiconductors (ITRS) identifies production test data as an essential element in improving design and technology in the manufacturing process feedback loop. One of the observations made from the high-volume production test data is that dies that fail due to a systematic failure have a tendency to form certain unique patterns that manifest as defect clusters at the wafer level. Identifying and categorising such clusters is a crucial step towards manufacturing yield improvement and implementation of real-time statistical process control. Addressing the semiconductor industry's needs, this research proposes an automatic defect cluster recognition system for semiconductor wafers that achieves up to 95% accuracy (depending on the product type)
Уровни представления вычислительного процесса и рабочей нагрузки на ЛВС
The article considers the computational process in local area network at four levels of interaction referring to their possible decomposition into parts and the connection between these parts. Classification of types of workload is presented. A solution to the problem of the rigid dependence of the research results on the features of the architecture of the applied equipment is proposed. В статье рассматривается вычислительный процесс в локальных вычислительных сетях на четырех уровнях взаимодействия по их возможности декомпозиции на части и по связям между этими частями. Представлена классификация видов рабочей нагрузки. Предложено решение проблемы жесткой зависимости получаемых результатов исследований от особенностей архитектуры применяемого оборудования.
Methodological Guidelines for Independent Work on the Subject “Engineering and computer graphics” (for Ist-year full-time and part-time students education level “bachelor” specialty 241 – Hotel and Restaurant Business).
- …