Use of Movable Beam Position Monitors for Beam Size Measurements

The use of beam position monitors (BPMs) as non-intercepting emittance monitors has been proposed in 1983 by Miller et al. The emittance measurement relies on the beam size dependency of the BPM signals. It is shown that the original proposal can be improved by using movable BPMs. Changing the BPM position with a stepping motor allows accurately calibrating the beam size measurement. The absolute scale on the beam size measurement is given by the scale of the stepping motor and can be determined in the laboratory and measured in situ. Uncontrolled changes of the beam position can be monitored through the use of a BPM triplet

Nonlinear Response of Orbit Monitors

The LEP Spectrometer is used to determine beam energy by measuring the bending angle of the beam in a dipole magnet, using six beam position monitors (BPMs), which must have an accuracy close to 10-6 m. The BPMs feature an Al block with an elliptical aperture and four capacitive pickup electrodes; their response depends on the pickup geometry, the aperture shape and the size of the beam. The beam size varies from BPM to BPM, which may give shifts of the measured position. We have investigated the implications of such shifts on the Spectrometer performance. We summarise our current understanding of the BPM behaviour using both a computer model of their response and measurements

The Value Relevance Of Announcements Of Transformational Information Technology Investments

In this paper, we examine the influence of IT strategic role to extend the findings of Im et al. (2001), Chatterjee et al. (2002) and Dos Santos et al. (1993). Specifically, we demonstrate that IT strategic role can explain how IT investments in each of the IT strategic roles might affect the firm\u27s competitive position and ultimately firm value. We find positive, abnormal returns to announcements of IT investments by firms making transformative IT investments, and with membership in industries with transform IT strategic roles. The results of previous research are not found to be significant when IT strategic role is included as an explanatory variable. These results provide support for the value of capturing the IT strategic role of a firm\u27s IT-related competitive maneuvering in studies striving to understand the conditions under which IT investments are likely to produce out-of-the-ordinary, positive returns

High dynamic range diamond detector acquisition system for beam wire scanner applications

The CERN Beam Instrumentation group has been working during the last years on the beam wire scanners upgrade to cope up with the increasing requirements of CERN experiments. These devices are used to measure the beam profile by crossing a thin wire through a circulating beam, the resulting secondary particles produced from beam/wire interaction are detected and correlated with the wire position to reconstruct the beam profile. The upgraded secondary particles acquisition electronics will use polycrystalline chemical vapour deposition (pCVD) diamond detectors for particle shower measurements, with low noise acquisitions performed on the tunnel, near the detector. The digital data is transmitted to the surface through an optical link with the GBT protocol. Two integrator ASICs (ICECAL and QIE10) are being characterized and compared for detector readout with the complete acquisition chain prototype. This contribution presents the project status, the QIE10 front-end performance and the first measurements with the complete acquisition system prototype. In addition, diamond detector signals from particle showers generated by an operational beam wire scanner are analysed and compared with an operational system

An FPGA Based Implementation for Real-Time Processing of the LHC Beam Loss Monitoring System's Data

The strategy for machine protection and quench prevention of the Large Hadron Collider (LHC) at the European Organisation for Nuclear Research (CERN) is mainly based on the Beam Loss Monitoring (BLM) system. At each turn, there will be several thousands of data to record and process in order to decide if the beams should be permitted to continue circulating or their safe extraction is necessary to be triggered. The processing involves a proper analysis of the loss pattern in time and for the decision the energy of the beam needs to be accounted. This complexity needs to be minimized by all means to maximize the reliability of the BLM system and allow a feasible implementation. In this paper, a field programmable gate array (FPGA) based implementation is explored for the real-time processing of the LHC BLM data. It gives emphasis on the highly efficient Successive Running Sums (SRS) technique used that allows many and long integration periods to be maintained for each detector's data with relatively small length shift registers that can be built around the embedded memory blocks

The LHC Beam Loss Monitoring System's Surface Building Installation

The strategy for machine protection and quench prevention of the Large Hadron Collider (LHC) at the European Organisation for Nuclear Research (CERN) is mainly based on the Beam Loss Monitoring (BLM) system. At each turn, there will be several thousands of data to record and process in order to decide if the beams should be permitted to continue circulating or their safe extraction is necessary. The BLM system can be sub-divided geographically to the tunnel and the surface building installations. In this paper the surface installation is explored, focusing not only to the parts used for the processing of the BLM data and the generation of the beam abort triggers, but also to the interconnections made with various other systems in order to provide the needed functionality

Single Gain Radiation Tolerant LHC Beam Loss Acquisition Card

The beam loss monitoring system is one of the most critical elements for the protection of the LHC. It must prevent the super conducting magnets from quenches and the machine components from damages, caused by beam losses. Ionization chambers and secondary emission based detectors are used at several locations around the ring. The sensors are producing a signal current, which is related to the losses. This current will be measured by a tunnel card, which acquires, digitizes and transmits the data via an optical link to the surface electronic. The usage of the system, for protection and tuning of the LHC and the scale of the LHC, imposed exceptional specifications of the dynamic range and radiation tolerance. The input dynamic allows measurements between 10pA and 1mA and its protected to high pulse of 1.5kV and its corresponding current. To cover this range, a current to frequency converter in combination with an ADC is used. The integrator output voltage is measured with an ADC to improve the resolution. The radiation tolerance required the adaption of conceptional design and a stringent selection of the components

Accuracy of the LEP Spectrometer Beam Orbit Monitors

At the LEP e+/e- collider, a spectrometer is used to determine the beam energy with a target accuracy of 10-4. The spectrometer measures the lattice dipole bending angle of the beam using six beam position monitors (BPMs). The required calibration error imposes a BPM accuracy of a 10-6 m corresponding to a relative electrical signal variation of 2. 10-5. The operating parameters have been compared with beam simulator results and non-linearBPM response simulations. The relative beam current variations between 0.02 and 0.03 and position changes of 0.1 mm during the fills of last year lead to uncertainties in the orbit measurements of well below 10-6 m. For accuracy tests absolute beam currents were varied by a factor of three. The environment magnetical field is introduced to correct orbit readings. The BPM linearity and calibration was checked using moveable supports and wire position sensors. The BPM triplet quantity is used to determine the orbit position monitors accuracy. The BPM triplet changed during the fills between 1 and 2 10-6 m RMS, which indicates a single BPM orbit determination accuracy between 1 and 1.5 10-6 m

The LHC beam loss monitoring system's data acquisition card

The beam loss monitoring (BLM) system [1] of the LHC is one of the most critical elements for the protection of the LHC. It must prevent the super conducting magnets from quenches and the machine components from damages, caused by beam losses. Ionization chambers and secondary emission based beam loss detectors are used on several locations around the ring. The sensors are producing a signal current, which is related to the losses. This current will be measured by a tunnel electronic, which acquires, digitizes and transmits the data via an optical link to the surface electronic. The so called threshold comparator (TC) [2] collects, analyzes and compares the data with threshold table. It also gives a dump signal through the combiner card to the beam inter lock system (BIC). The usage of the system, for protection and tuning of the LHC and the scale of the LHC, imposed exceptional specification of the dynamic range and radiation tolerance. The input current dynamic range should allow measurements between 10pA and 1mA and it should also be protected to very high pulse of 1.5kV and its corresponding current. To cover this range, a current to frequency converter (CFC) is used in the tunnel card, which produces an output frequency of 0.05Hz at 10pA, and 5MHz at 1mA. In addition to the output frequency, the integrator output voltage is measured with a 12bit ADC to improve the resolution. The location of the CFC card next to the detector imposes the placement of the card in the LHC tunnel, exposing the card to radiation. The radiation tolerance was defined by assuming a 20 year operation period corresponding to 400Gy. A mixture of radiation tolerant Asics from the microelectronic group at CERN, and standard component was chosen to cope with these requirements

Performance of BPM Electronics for the LEP Spectrometer

At the LEP e+/e- collider at CERN, Geneva, a Spectrometer is used to determine the beam energy with a relative accuracy of 10-4. The Spectrometer measures the change in bending angle in a well-characterised dipole magnet as LEP is ramped. The beam trajectory is obtained using three beam position monitors (BPMs) on each side of the magnet. The error on each BPM measurement should not exceed 1 micron if the desired accuracy on the bending angle is to be reached. The BPMs used consist of an aluminium block with an elliptical aperture and four capacitive button pickup electrodes. The button signals are fed to customised electronics supplied by Bergoz. The electronics use time multiplexing of individual button signals through a single processing chain to optimise for long-term stability. We report on our experience of the performance of these electronics, describing measurements made with test signals and with beam. We have implemented a beam-based calibration procedure and have monitored the reproducibility of the measurements obtained over time. Measurements show that a relative accuracy better than 300 nm is achievable over a period of 1 hr