Strain and dynamic measurements using fiber optic sensors embedded into graphite/epoxy tubes

Graphite/epoxy tubes were fabricated with embedded optical fibers to evaluate the feasibility of monitoring strains with a fiber optic technique. Resistance strain gauges were attached to the tubes to measure strain at four locations along the tube for comparison with the fiber optic sensors. Both static and dynamic strain measurements were made with excellent agreement between the embedded fiber optic strain sensor and the strain gauges. Strain measurements of 10(exp -7) can be detected with the optical phase locked loop (OPLL) system using optical fiber. Because of their light weight, compatibility with composites, immunity to electromagnetic interference, and based on the static and dynamic results obtained, fiber optic sensors embedded in composites may be useful as the sensing component of smart structures

Essentialist Reasoning and Knowledge Effects on Biological Reasoning in Young Children

Biological kinds undergo a variety of changes during their life span, and these changes vary in degree by organism. Understanding that an organism, such as a caterpillar, maintains category identity over its life span despite dramatic changes is a key concept in biological reasoning. At present, we know little about the developmental trajectory of children’s understanding of dramatic life-cycle changes and how this might relate to their understanding of evolution. We suggest that this understanding is a key precursor to later understanding of evolutionary change. Two studies examined the impact of age and knowledge on children’s biological reasoning about living kinds that undergo a range of natural life-span changes—from subtle to dramatic. The participants, who were 3, 4, and 7 years old, were shown paired pictures of juvenile and adult animals and asked to endorse biological or nonbiological causal mechanisms to account for life-span change. Additionally, reasoning of 3- and 4-year-old participants was compared before and after exposure to caterpillars transforming into butterflies. The results are framed in terms of a developmental trajectory in essentialist reasoning, a cognitive bias that has been associated with difficulties in understanding and accepting evolution

A Quasi-Experimental Evaluation of High Emitter Non-Compliance and its Impact on Vehicular Tailpipe Emissions in Atlanta, 1997-2001

A quasi-experimental evaluation is employed to assess the compliance behavior of high emitters in response to Atlanta’s Inspection and Maintenance program between 1997 and 2001 and to predict the impact of compliance behavior on vehicular tailpipe emissions of ozone precursors, such as carbon monoxide, hydrocarbons and nitrogen oxide. Remote sensing data of a sample of approximately 0.8 million observations of on-road vehicles are matched with IM program data and vehicle registration data to identify the compliant and non-compliant high emitters. A mixed-pool time-series regression analysis is carried out to predict changes in the vehicular tailpipe emissions due to the compliance and non-compliance of the high emitters in the Atlanta airshed

Application of Sleeper Cab Thermal Management Technologies to Reduce Idle Climate Control Loads in Long-Haul Trucks

Each intercity long-haul truck in the U.S. idles approximately 1,800 hrs per year, primarily for sleeper cab hotel loads. Including workday idling, over 2 billion gallons of fuel are used annually for truck idling. NREL's CoolCab project works closely with industry to design efficient thermal management systems for long-haul trucks that keep the cab comfortable with minimized engine idling and fuel use. The impact of thermal load reduction technologies on idle reduction systems were characterized by conducting thermal soak tests, overall heat transfer tests, and 10-hour rest period A/C tests. Technologies evaluated include advanced insulation packages, a solar reflective film applied to the vehicle's opaque exterior surfaces, a truck featuring both film and insulation, and a battery-powered A/C system. Opportunities were identified to reduce heating and cooling loads for long-haul truck idling by 36% and 34%, respectively, which yielded a 23% reduction in battery pack capacity of the idle-reduction system. Data were also collected for development and validation of a CoolCalc HVAC truck cab model. CoolCalc is an easy-to-use, simplified, physics-based HVAC load estimation tool that requires no meshing, has flexible geometry, excludes unnecessary detail, and is less time-intensive than more detailed computer-aided engineering modeling approaches

Criticality benchmark guide for light-water-reactor fuel in transportation and storage packages

This report is designed as a guide for performing criticality benchmark calculations for light-water-reactor (LWR) fuel applications. The guide provides documentation of 180 criticality experiments with geometries, materials, and neutron interaction characteristics representative of transportation packages containing LWR fuel or uranium oxide pellets or powder. These experiments should benefit the U.S. Nuclear Regulatory Commission (NRC) staff and licensees in validation of computational methods used in LWR fuel storage and transportation concerns. The experiments are classified by key parameters such as enrichment, water/fuel volume, hydrogen-to-fissile ratio (H/X), and lattice pitch. Groups of experiments with common features such as separator plates, shielding walls, and soluble boron are also identified. In addition, a sample validation using these experiments and a statistical analysis of the results are provided. Recommendations for selecting suitable experiments and determination of calculational bias and uncertainty are presented as part of this benchmark guide

Degradation of ZnO Window Layer for CIGS by Damp-Heat Exposure: Preprint

This paper summarizes our work with more details and an emphasis on the DH-induced degradation of Al-doped ZnO and Zn1-xMgxO alloys. The other two TCOs, ITO and F:SnO2, are not included here

Study on the Humidity Susceptibility of Thin-Film CIGS Absorber

The report summarizes the research on the susceptibility of a thermally co-evaporated CuInGaSe2 (CIGS) thin-film absorber to humidity and its consequence on composition, morphology, electrical and electronic properties, and device efficiency

Plasma cholesterol levels and brain development in preterm newborns.

BackgroundTo assess whether postnatal plasma cholesterol levels are associated with microstructural and macrostructural regional brain development in preterm newborns.MethodsSixty preterm newborns (born 24-32 weeks gestational age) were assessed using MRI studies soon after birth and again at term-equivalent age. Blood samples were obtained within 7 days of each MRI scan to analyze for plasma cholesterol and lathosterol (a marker of endogenous cholesterol synthesis) levels. Outcomes were assessed at 3 years using the Bayley Scales of Infant Development, Third Edition.ResultsEarly plasma lathosterol levels were associated with increased axial and radial diffusivities and increased volume of the subcortical white matter. Early plasma cholesterol levels were associated with increased volume of the cerebellum. Early plasma lathosterol levels were associated with a 2-point decrease in motor scores at 3 years.ConclusionsHigher early endogenous cholesterol synthesis is associated with worse microstructural measures and larger volumes in the subcortical white matter that may signify regional edema and worse motor outcomes. Higher early cholesterol is associated with improved cerebellar volumes. Further work is needed to better understand how the balance of cholesterol supply and endogenous synthesis impacts preterm brain development, especially if these may be modifiable factors to improve outcomes