The Effects of Air and Underwater Blast on Composite Sandwich Panels and Tubular Laminate Structures

The resistance of glass-fibre reinforced polymer (GFRP) sandwich panels and laminate tubes to blast in air and underwater environments has been studied. Procedures for monitoring the structural response of such materials during blast events have been devised. High-speed photography was employed during the air-blast loading of GFRP sandwich panels, in conjunction with digital image correlation (DIC), to monitor the deformation of these structures under shock loading. Failure mechanisms have been revealed by using DIC and confirmed in post-test sectioning. Strain gauges were used to monitor the structural response of similar sandwich materials and GFRP tubular laminates during underwater shocks. The effect of the backing medium (air or water) of the target facing the shock has been identified during these studies. Mechanisms of failure have been established such as core crushing, skin/core cracking, delamination and fibre breakage. Strain gauge data supported the mechanisms for such damage. These studies were part of a research programme sponsored by the Office of Naval Research (ONR) investigating blast loading of composite naval structures. The full-scale experimental results presented here will aid and assist in the development of analytical and computational models. Furthermore, it highlights the importance of support and boundary conditions with regards to blast resistant design

Evaluation of environmental design strategies for university buildings

This paper examines the performance of environmental strategies in seven recently constructed or refurbished university buildings in the UK. These buildings contain a range of administrative spaces, classrooms, libraries and studios, reflecting their often complex, multi-use, heterogeneous nature. The key features of each environmental strategy are described (including passive, mixed-mode or active systems), in the context of the occupants and spaces they serve and the level of interaction that they afford. Energy performance and occupant thermal comfort (assessed by user surveys) are analysed and compared with studies of other non-domestic buildings, which have typically focused on more predictable single administrative uses (e.g. government offices), and unusually effective operation scenarios (e.g. continuous monitoring by expert building managers). The paper concludes by examining two of the case studies that reflect an increasingly common model of ‘flexible’ environmental design in more detail, identifying key features of the strategies for each building that have had a significant impact on their performance. The design assumptions leading to these features will be explored, and key lessons identified, contributing towards the development of a more robust evidential basis for choosing appropriate environmental strategies for university and other non-domestic buildings in the UK

An experimental methodology to characterise post-necking behaviour and quantify ductile damage accumulation in isotropic materials

The development of ductile damage, that occurs beyond the point of necking in a tensile test, can be difficult to quantify. An experimental methodology has been developed to accurately characterise the post-necking deformation response of a material through continuous monitoring of the specimens shape up until rupture. By studying the evolution of the neck geometry, the correct values of the local stress and strain have been determined in samples of grade 304L stainless steel and C110 copper. Notched bar specimens of various notch acuities were examined enabling the effects of stress triaxiality on ductile fracture to be determined. The methodology developed has provided a robust framework for macroscopic measurements of ductile damage during the necking process. To characterise the material degradation process, the elastic modulus reduction method was employed on hourglass-shaped specimens of the same materials. Stiffness degradation was measured using a small gauge extensometer during uninterrupted tensile tests with partial elastic unloadings. A metallographic study was conducted on progressively damaged specimens in order to validate the macroscopic damage measurements. A new non-linear ductile damage accumulation law has been developed and calibrated, which provides an advanced representation of the experimental results, and a significant improvement compared to linear accumulation models frequently employed. This realistic modelling approach considers the degradation of the material when it has undergone severe plastic deformation, and provides a more accurate representation of the near failure behaviour by considering the effects of stress triaxiality. The methodology provides accurate data for damage model development and calibration, to improve the predictions of remnant life from ductile damage in engineering components

BAC-HAPPY mapping (BAP mapping): a new and efficient protocol for physical mapping

Physical and linkage mapping underpin efforts to sequence and characterize the genomes of eukaryotic organisms by providing a skeleton framework for whole genome assembly. Hitherto, linkage and physical “contig” maps were generated independently prior to merging. Here, we develop a new and easy method, BAC HAPPY MAPPING (BAP mapping), that utilizes BAC library pools as a HAPPY mapping panel together with an Mbp-sized DNA panel to integrate the linkage and physical mapping efforts into one pipeline. Using Arabidopsis thaliana as an exemplar, a set of 40 Sequence Tagged Site (STS) markers spanning ~10% of chromosome 4 were simultaneously assembled onto a BAP map compiled using both a series of BAC pools each comprising 0.7x genome coverage and dilute (0.7x genome) samples of sheared genomic DNA. The resultant BAP map overcomes the need for polymorphic loci to separate genetic loci by recombination and allows physical mapping in segments of suppressed recombination that are difficult to analyze using traditional mapping techniques. Even virtual “BAC-HAPPY-mapping” to convert BAC landing data into BAC linkage contigs is possible.Giang T. H. Vu, Paul H. Dear, Peter D. S. Caligari and Mike J. Wilkinso

A study on the bending of laminated glass under blast loading

Background: The bending behaviour of laminated glass plays an important role in determining its overall response to blast loading. It is costly and difficult to characterise the bending behaviour by carrying out full-scale blast tests, therefore an alternative method is required. Objective: The objective of this study is to understand the response of laminated glass under high-rate bending in the laboratory at rates representative of blast loading. Methods: In this paper a novel testing method is presented in which laminated glass strips of 700 mm long by 60 mm wide are tested up to speeds of 10 m/s in the laboratory. The laminated glass is accelerated to speeds comparable to blast loading and then brought to rest at its edges to mimic impulsive blast loading conditions. Different interlayer thickness, impact speeds, and boundary conditions were explored. Additionally, modelling methods were used to study the flexural rigidity of post-cracked laminated glass. Results: From the experiments it was found that the interlayer thickness plays a key role in determining whether the dominant failure mechanism is de-bonding of interlayer from the glass or interlayer tearing. In addition, it was found that by allowing the frame to bend under loading, the laminated glass can carry greater loads without failure. Finally, an iterative method was used to quantify the flexural rigidity of post-cracked laminated glass depending on the speed of travel. This is a novel finding as it is usually assumed that laminated glass behaves like a membrane in the post-cracked phase of the response. Conclusion: In modelling and design of laminated glass structures under blast loading, post-crack flexural rigidity must be taken into account. Additionally, having novel frame designs to add further load bearing capacity to the framing members, plays a key role in reducing the load intensity on the laminated glass structure

A provisional database for the silicon content of foods in the United Kingdom

Si may play an important role in bone formation and connective tissue metabolism. Although biological interest in this element has recently increased, limited literature exists on the Si content of foods. To further our knowledge and understanding of the relationship between dietary Si and human health, a reliable food composition database, relevant for the UK population, is required. A total of 207 foods and beverages, commonly consumed in the UK, were analysed for Si content. Composite samples were analysed using inductively coupled plasma&ndash;optical emission spectrometry following microwave-assisted digestion with nitric acid and H2O2. The highest concentrations of Si were found in cereals and cereal products, especially less refined cereals and oat-based products. Fruit and vegetables were highly variable sources of Si with substantial amounts present in Kenyan beans, French beans, runner beans, spinach, dried fruit, bananas and red lentils, but undetectable amounts in tomatoes, oranges and onions. Of the beverages, beer, a macerated whole-grain cereal product, contained the greatest level of Si, whilst drinking water was a variable source with some mineral waters relatively high in Si. The present study provides a provisional database for the Si content of UK foods, which will allow the estimation of dietary intakes of Si in the UK population and investigation into the role of dietary Si in human health.<br /

Considering the impact of situation-specific motivations and constraints in the design of naturally ventilated and hybrid buildings

A simple logical model of the interaction between a building and its occupants is presented based on the principle that if free to do so, people will adjust their posture, clothing or available building controls (windows, blinds, doors, fans, and thermostats) with the aim of achieving or restoring comfort and reducing discomfort. These adjustments are related to building design in two ways: first the freedom to adjust depends on the availability and ease-of-use of control options; second the use of controls affects building comfort and energy performance. Hence it is essential that these interactions are considered in the design process. The model captures occupant use of controls in response to thermal stimuli (too warm, too cold etc.) and non-thermal stimuli (e.g. desire for fresh air). The situation-specific motivations and constraints on control use are represented through trigger temperatures at which control actions occur, motivations are included as negative constraints and incorporated into a single constraint value describing the specifics of each situation. The values of constraints are quantified for a range of existing buildings in Europe and Pakistan. The integration of the model within a design flow is proposed and the impact of different levels of constraints demonstrated. It is proposed that to minimise energy use and maximise comfort in naturally ventilated and hybrid buildings the designer should take the following steps: 1. Provide unconstrained low energy adaptive control options where possible, 2. Avoid problems with indoor air quality which provide motivations for excessive ventilation rates, 3. Incorporate situation-specific adaptive behaviour of occupants in design simulations, 4. Analyse the robustness of designs against variations in patterns of use and climate, and 5. Incorporate appropriate comfort standards into the operational building controls (e.g. BEMS)

Comparative Genome Analysis Reveals Divergent Genome Size Evolution in a Carnivorous Plant Genus

The C-value paradox remains incompletely resolved after >40 yr and is exemplified by 2,350-fold variation in genome sizes of flowering plants. The carnivorous Lentibulariaceae genus , displaying a 25-fold range of genome sizes, is a promising subject to study mechanisms and consequences of evolutionary genome size variation. Applying genomic, phylogenetic, and cytogenetic approaches, we uncovered bidirectional genome size evolution within the genus . The Steyerm. genome (86 Mbp) has probably shrunk by retroelement silencing and deletion-biased double-strand break (DSB) repair, from an ancestral size of 400 to 800 Mbp to become one of the smallest among flowering plants. The Stapf genome has expanded by whole-genome duplication (WGD) and retrotransposition to 1550 Mbp. became allotetraploid after the split from the clade ∼29 Ma. A. St.-Hil. (179 Mbp), a close relative of , proved to be a recent (auto)tetraploid. Our analyses suggest a common ancestor of the genus a with an intermediate 1C value (400–800 Mbp) and subsequent rapid genome size evolution in opposite directions. Many abundant repeats of the larger genome are absent in the smaller, casting doubt on their functionality for the organism, while recurrent WGD seems to safeguard against the loss of essential elements in the face of genome shrinkage. We cannot identify any consistent differences in habitat or life strategy that correlate with genome size changes, raising the possibility that these changes may be selectively neutral