Mechanistic Transport Analysis to Predict In Vivo Oral Bioperformance.

Oral delivery of solid dosage forms is the most frequently used route of administration for pharmaceutical drug products. Despite their ubiquity, development of robust oral dosage forms can be challenging due to the complex nature of dissolution and absorption in the gastrointestinal tract. The goal of this research was to set a basis for development of practical in vitro physiological dissolution methodologies that could be used to design drug product formulations and scientifically justify reduced regulatory requirements for product approval (e.g. introduction of generic products). While existing methodologies can be used as benchmarks for development of new dosage forms, no single in vitro apparatus captures the range of key physiological conditions that can impact in vivo bioperformance of a diverse range of drug products. In this work we provide a comprehensive and up-to-date summary of the critical physiological parameters affecting dissolution and absorption of oral dosage forms in humans and dogs, including average values and ranges for each parameter from the literature. Next, we developed a mechanistic transport model that successfully described the kinetics of partitioning of weak acids in solution from aqueous to organic medium, and proposed scaling factors for establishing physiological relevance of the in vitro two-phase dissolution apparatus. In contrast to previous kinetically derived mathematical models, our model uses physical input parameters that are known or can be estimated a priori. Next, we developed a mechanistic transport model for predicting the rate and extent of dissolution of solid drug particles under physiological conditions (e.g. low buffer capacity and moderate drug saturation), extending previously published models by taking into account the impact of dissolved drug concentration on pH change and dissolution performance as a function of time. Finally, we developed an in vivo transport analysis to identify practical in vitro dissolution methodologies that could be used to predict in vivo performance of oral formulations of the BCS II weak acid, Ibuprofen, in dogs. Taken as a whole, this work sets a basis for determination of the key, rate-determining factors driving in vivo oral drug product bioperformance, and selection of appropriate in vitro predictive dissolution methodologies.PhDPharmaceutical SciencesUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/107268/1/mourod_1.pd

Magnetic resonance imaging quantification of fasted state colonic liquid pockets in healthy humans

The rate and extent of drug dissolution and absorption from solid oral dosage forms is highly dependent on the volume of liquid in the gastrointestinal tract (GIT). However, little is known about the time course of GIT liquid volumes after drinking a glass of water (8 oz), particularly in the colon, which is a targeted site for both locally and systemically acting drug products. Previous magnetic resonance imaging (MRI) studies offered novel insights on GIT liquid distribution in fasted humans in the stomach and small intestine, and showed that freely mobile liquid in the intestine collects in fairly distinct regions or “pockets”. Based on this previous pilot data, we hypothesized that (1) it is possible to quantify the time course of the volume and number of liquid pockets in the undisturbed colon of fasted healthy humans following ingestion of 240 mL, using noninvasive MRI methods; (2) the amount of freely mobile water in the fasted human colon is of the order of only a few milliliters. Twelve healthy volunteers fasted overnight and underwent fasted abdominal MRI scans before drinking 240 mL (∼8 fluid ounces) of water. After ingesting the water they were scanned at frequent intervals for 2 h. The images were processed to quantify freely mobile water in the total and regional colon: ascending, transverse, and descending. The fasted colon contained (mean ± SEM) 11 ± 5 pockets of resting liquid with a total volume of 2 ± 1 mL (average). The colonic fluid peaked at 7 ± 4 mL 30 min after the water drink. This peak fluid was distributed in 17 ± 7 separate liquid pockets in the colon. The regional analysis showed that pockets of free fluid were found primarily in the ascending colon. The interindividual variability was very high; the subjects showed a range of number of colonic fluid pockets from 0 to 89 and total colonic freely mobile fluid volume from 0 to 49 mL. This is the first study measuring the time course of the number, regional location, and volume of pockets of freely mobile liquid in the undisturbed colon of fasted humans after ingestion of a glass of water. Novel insights into the colonic fluid environment will be particularly relevant to improve our understanding and design of the in vivo performance of controlled release formulations targeted to the colon. The in vivo quantitative information presented here can be input into physiologically based mechanistic models of dissolution and absorption, and can be used in the design and set up of novel in vitro performance tools predictive of the in vivo environment

Quantification of gastrointestinal liquid volumes and distribution following a 240 mL dose of water in the fasted state

Previous imaging studies offered a snapshot of water distribution in fasted humans and showed that water in the small intestine is distributed in small pockets. This study aimed to quantify the volume and number of water pockets in the upper gut of fasted healthy humans following ingestion of a glass of water (240 mL, as recommended for bioavailability/bioequivalence (BA/BE) studies), using recently validated noninvasive magnetic resonance imaging (MRI) methods. Twelve healthy volunteers underwent upper and lower abdominal MRI scans before drinking 240 mL (8 fluid ounces) of water. After ingesting the water, they were scanned at intervals for 2 h. The drink volume, inclusion criteria, and fasting conditions matched the international standards for BA/BE testing in healthy volunteers. The images were processed for gastric and intestinal total water volumes and for the number and volume of separate intestinal water pockets larger than 0.5 mL. The fasted stomach contained 35 ± 7 mL (mean ± SEM) of resting water. Upon drinking, the gastric fluid rose to 242 ± 9 mL. The gastric water volume declined rapidly after that with a half emptying time (T50%) of 13 ± 1 min. The mean gastric volume returned back to baseline 45 min after the drink. The fasted small bowel contained a total volume of 43 ± 14 mL of resting water. Twelve minutes after ingestion of water, small bowel water content rose to a maximum value of 94 ± 24 mL contained within 15 ± 2 pockets of 6 ± 2 mL each. At 45 min, when the glass of water had emptied completely from the stomach, total intestinal water volume was 77 ± 15 mL distributed into 16 ± 3 pockets of 5 ± 1 mL each. MRI provided unprecedented insights into the time course, number, volume, and location of water pockets in the stomach and small intestine under conditions that represent standard BA/BE studies using validated techniques. These data add to our current understanding of gastrointestinal physiology and will help improve physiological relevance of in vitro testing methods and in silico transport analyses for prediction of bioperformance of oral solid dosage forms, particularly for low solubility Biopharmaceutics Classification System (BCS) Class 2 and Class 4 compounds

Selection of In Vivo Predictive Dissolution Media Using Drug Substance and Physiological Properties

The rate and extent of drug dissolution in the gastrointestinal (GI) tract are highly dependent upon drug physicochemical properties and GI fluid properties. Biorelevant dissolution media (BDM), which aim to facilitate in vitro prediction of in vivo dissolution performance, have evolved with our understanding of GI physiology. However, BDM with a variety of properties and compositions are available, making the choice of dissolution medium challenging. In this tutorial, we describe a simple and quantitative methodology for selecting practical, yet physiologically relevant BDM representative of fasted humans for evaluating dissolution of immediate release formulations. Specifically, this methodology describes selection of pH, buffer species, and concentration and evaluates the importance of including bile salts and phospholipids in the BDM based upon drug substance log D, pK(a), and intrinsic solubility. The methodology is based upon a mechanistic understanding of how three main factors affect dissolution, including (1) drug ionization at gastrointestinal pH, (2) alteration of surface pH by charged drug species, and (3) drug solubilization in mixed lipidic aggregates comprising bile salts and phospholipids. Assessment of this methodology through testing and comparison with literature reports showed that the recommendations correctly identified when a biorelevant buffer capacity or the addition of bile salts and phospholipids to the medium would appreciably change the drug dissolution profile. This methodology can enable informed decisions about when a time, complexity, and/or cost-saving buffer is expected to lead to physiologically meaningful in vitro dissolution testing, versus when a more complex buffer would be required

Correction: Mudie et al. In Vitro-In Silico Tools for Streamlined Development of Acalabrutinib Amorphous Solid Dispersion Tablets. <i>Pharmaceutics</i> 2021, <i>13</i>, 1257

The authors wish to make the following corrections to this paper [...

Amorphous Solid Dispersion Tablets Overcome Acalabrutinib pH Effect in Dogs

Calquence® (crystalline acalabrutinib), a commercially marketed tyrosine kinase inhibitor (TKI), exhibits significantly reduced oral exposure when taken with acid-reducing agents (ARAs) due to the low solubility of the weakly basic drug at elevated gastric pH. These drug–drug interactions (DDIs) negatively impact patient treatment and quality of life due to the strict dosing regimens required. In this study, reduced plasma drug exposure at high gastric pH was overcome using a spray-dried amorphous solid dispersion (ASD) comprising 50% acalabrutinib and 50% hydroxypropyl methylcellulose acetate succinate (HPMCAS, H grade) formulated as an immediate-release (IR) tablet. ASD tablets achieved similar area under the plasma drug concentration–time curve (AUC) at low and high gastric pH and outperformed Calquence capsules 2.4-fold at high gastric pH in beagle dogs. In vitro multicompartment dissolution testing conducted a priori to the in vivo study successfully predicted the improved formulation performance. In addition, ASD tablets were 60% smaller than Calquence capsules and demonstrated good laboratory-scale manufacturability, physical stability, and chemical stability. ASD dosage forms are attractive for improving patient compliance and the efficacy of acalabrutinib and other weakly basic drugs that have pH-dependent absorption

Development of a Biorelevant, Material-Sparing Membrane Flux Test for Rapid Screening of Bioavailability-Enhancing Drug Product Formulations

Bioavailability-enhancing formulations are often used to overcome challenges of poor gastrointestinal solubility for drug substances developed for oral administration. Conventional <i>in vitro</i> dissolution tests often do not properly compare such formulations due to the many different drug species that may exist in solution. To overcome these limitations, we have designed a practical <i>in vitro</i> membrane flux test, that requires minimal active pharmaceutical ingredient (API) and is capable of rapidly screening many drug product intermediates. This test can be used to quickly compare performance of bioavailability-enhancing formulations with fundamental knowledge of the rate-limiting step(s) to membrane flux. Using this system, we demonstrate that the flux of amorphous itraconazole (logD = 5.7) is limited by aqueous boundary layer (ABL) diffusion and can be increased by adding drug-solubilizing micelles or drug-rich colloids. Conversely, the flux of crystalline ketoconazole at pH 5 (logD = 2.2) is membrane-limited, and adding solubilizing micelles does not increase flux. Under certain circumstances, the flux of ketoconazole may also be limited by dissolution rate. These cases highlight how a well-designed <i>in vitro</i> assay can provide critical insight for oral formulation development. Knowing whether flux is limited by membrane diffusion, ABL diffusion, or dissolution rate can help drive formulation development decisions. It may also be useful in predicting <i>in vivo</i> performance, dose linearity, food effects, and regional-dependent flux along the length of the gastrointestinal tract