72 research outputs found
Risk-perception formation considering tangible and non-tangible aspects of cycling : a flemish case study
Risk perception influences cycling attributes toward its adoption. Researchers are investigating attributes associated with risk formation. In this study, various attributes were selected which influence the user’s formation of risk perception. For this purpose, an online questionnaire survey was conducted in Flanders, among all segments of the population (N = 774). Participants were asked questions for attributes relating to risk formation. Results suggested that risk formation among users evolves around tangible to non-tangible attributes. The spectrum of risk perception was developed which visualizes risk evolution, considering various attributes. Surprisingly, elements such as “comfort”, surface evenness, and policies were rated as being neutral. Infrastructure and the presence of opposite road users tend to be foreseen as critical factors for risk formation. Risk perception varies depending upon psychometric paradigm shifts, such as dread and unknown risk. This strange notion is considered to lie in a space between dread and unknown risk. This explains the difference in risk perception, knowingly or not knowingly (subconsciously), yet expressing cognitively and evolving inside. This is an interesting finding, but reasons behind such a motive need to be explained. A possible explanation behind such behavior is that people tend to change their responses due to knowledge acquisition during the survey
Treatment of natural fiber for application in concrete pavement
Concrete crack is one of the main problems observed in concrete technology due to drying shrinkage. Incorporating fibers in concrete production is one of the mechanisms implemented to mitigate cracks. Nowadays, investigators concentrate on different techniques to replace human-made fiber with existing natural fibers for fiber-reinforced composite material. Utilization of natural fiber has an initiation for the development of eco-friendly materials by reducing damages caused by human-made materials and saving nonrenewable resources. Natural fibers are readily and abundantly available, sustainable, and biodegradable, with low cost and low density, and have superior specific properties. Nevertheless, there are some limitations of natural fiber compared to human-made fiber. Consequently, significant energy was applied to alter natural fiber’s surface and morphology using physical, chemical, and biological treatment techniques to overcome the limitation. The primary intention of surface treatment is to modify the bond between the fiber surface and the polymer matrix. However, based on this literature review, there were no specific treatment techniques to be followed to select the best one from the others as criteria. It should include all parameters to consider starting from the stage from the cradle to the grave, cost of chemicals, transportation, and labors, including energy consumption and effluent energy. Additionally, their environmental effect also investigated in detail to compare each other
Numerical evaluation of early-age crack induction in continuously reinforced concrete pavement with different saw-cut dimensions subjected to external varying temperature field
Since 1970, continuously reinforced concrete pavements have been used in Belgium. The standard design concept for CRCP has been modified through several changes made in the design parameters to eliminate the cluster of closely spaced crack patterns, since these crack patterns lead to the development of spalling and punch-out distresses in CRCPs. Despite adjusting the longitudinal reinforcement ratio, slab thickness, and addition of asphalt interlayer, the narrowly spaced cracks could not be effectively removed. The application of transverse partial surface saw-cuts significantly reduced the probability of randomly occurring cracks in the reconstruction project of the Motorway E313 in Herentals, Belgium. The field investigation has also indicated that the early-age crack induction in CRCP is quite susceptible to the saw-cut depth. Therefore, the present study aims to evaluate the effect of different depths and lengths of the partial surface saw-cut on the effectiveness of crack induction in CRCP under external varying temperature field. For this purpose, the FE software program DIANA 10.3 is used to develop the three dimensional finite element model of the active crack control CRCP segment. The characteristics of early-age crack induction in terms of crack initiation and crack propagation obtained from the FE model are compared and discussed concerning the field observations of the crack development on the active crack control E313 test sections. Findings indicate that the deeper saw-cut with longer cut-lengths could be a more effective attempt to induce the cracks in CRCP in desirable distributions to decrease the risk of spalling and punch-out distresses in the long-term performance of CRCP. These findings could be used as guidance to select the appropriate depth and length of saw-cut for active crack control sections of CRCP in Belgium
Evaluating the early-age crack induction in advanced reinforced concrete pavement using partial surface saw-cuts
The technological innovation of continuously reinforced concrete pavement (CRCP) that contains a significantly reduced amount of reinforcement and the same fundamental behavior as CRCP is called advanced reinforced concrete pavement (ARCP). This new concept of a rigid pavement structure is developed to eliminate unnecessary continuous longitudinal steel bars of CRCP by using partial length steel bars at predetermined crack locations. In Belgium, partial surface saw-cuts are used as the most effective crack induction method to eliminate the randomness in early-age crack patterns by inducing cracks at the predetermined locations of CRCP. The reinforcement layout of ARCP is designed based on the distribution of steel stress in continuous longitudinal steel bar in CRCP and the effectiveness of partial surface saw-cuts as a crack induction method. The 3D finite element (FE) model is developed to evaluate the behavior of ARCP with partial surface saw-cuts. The early-age crack characteristics in terms of crack initiation and crack propagation obtained from the FE simulation are validated with the field observations of cracking characteristics of the CRCP sections in Belgium. The finding indicates that there is fundamentally no difference in the steel stress distribution in the partial length steel bar of ARCP and continuous steel bar of CRCP. Moreover, ARCP exhibits the same cracking characteristics as CRCP even with a significantly reduced amount of continuous reinforcement
Estimation of safety performance functions for urban intersections using various functional forms of the negative binomial regression model and a generalized Poisson regression model
Intersections are established dangerous entities of a highway system due to the challenging and unsafe roadway environment they are characterized for drivers and other road users. In efforts to improve safety, an enormous interest has been shown in developing statistical models for intersection crash prediction and explanation. The selection of an adequate form of the statistical model is of great importance for the accurate estimation of crash frequency and the correct identification of crash contributing factors. Using a six-year crash data, road infrastructure and geometric design data, and traffic flow data of urban intersections, we applied three different functional forms of negative binomial models (i.e., NB-1, NB-2, NB-P) and a generalized Poisson (GP) model to develop safety performance functions (SPF) by crash severity for signalized and unsignalized intersections. This paper presents the relationships found between the explanatory variables and the expected crash frequency. It reports the comparison of different models for total, injury & fatal, and property damage only crashes in order to obtain ones with the maximum estimation accuracy. The comparison of models was based on the goodness of fit and the prediction performance measures.
The fitted models showed that the traffic flow and several variables related to road infrastructure and geometric design significantly influence the intersection crash frequency. Further, the goodness of fit and the prediction performance measures revealed that the NB-P model outperformed other models in most crash severity levels for signalized intersections. For the unsignalized intersections, the GP model was the best performing model. When only the NB models were compared, the functional form NB-P performed better than the traditional NB-1 and, more specifically, the NB-2 models. In conclusion, our findings suggest a potential improvement in the estimation accuracy of the SPFs for urban intersections by applying the NB-P and GP models
CRCP on the N49 : how the repair of the longitudinal joint leads to a better view on the crack formation of CRCP
The influence of higher speed limits on motorways on road safety and truck accidents
In order to determine the maximum speed limit, first an optimal balance must be determined between the benefits in terms of mobility and the impact on road safety. Amateurs of increasing the speed limit on motorways to 130 km/h base themselves on international comparisons and on the fact that vehicles today are equipped with active and passive safety technology. But one can not ignore the fact that a higher speed limit on motorways; is likely to have a negative impact on road safety.
The paper describes the relationship between the "higher" speed and the impact on the number of accidents and their gravity, on the speed differences and on the impact on mobility in general. Because accidents involving trucks are so spectacular, they remain often etched in memory. With their imposing mass, these vehicles often increase the impact of an accident and also the impact on mobility is correspondingly. From the statistics, a number of important conclusions can be drawn regarding the risk assessment for truck accidents, the death risk to the occupants in the truck or other vehicles involved, the severity of the truck accidents, the proportion of truck accidents on the motorways, the types of accidents, and the distribution of truck accidents by day and night
- …